Installs a local-premount initramfs hook that intercepts bee.wipe=all before
squashfs is mounted. Shows a numbered disk selection TUI (pure POSIX sh), wipes
selected disks (nvme format / blkdiscard / dd fallback), syncs, and reboots.
Works even when squashfs fails to mount.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a "WIPE ALL DISKS" entry to both GRUB and isolinux menus (bee.wipe=all).
Includes bee-wipe-disks for manual use from a running live system.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Squashfs versioning:
- ISO now contains filesystem-v<VERSION>.squashfs instead of the generic
filesystem.squashfs, making it immediately visible which build is
running (visible in /run/live/medium/live/ at boot time).
- Full build path: rename filesystem.squashfs → filesystem-v*.squashfs
after lb build, before lb binary_checksums/binary_iso.
- Fast path: find and unpack whatever filesystem*.squashfs exists, repack
as the new versioned name, remove the old file, update the ISO.
- needs_full_build: accept any filesystem*.squashfs so version changes
alone don't force a full rebuild.
Media selection hardening:
- Add live-media=/dev/disk/by-label/<LABEL> to the kernel boot line in
addition to the existing live-media-label=<LABEL>. live-boot will now
open exactly the labeled device rather than scanning all block devices,
preventing accidental use of squashfs files from local disks or
stale virtual media attached via IPMI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mksquashfs 4.5.1 (bookworm) writes a non-SQUASHFS_INVALID_BLK value for
xattr_id_table_start in the superblock even when -no-xattrs is passed, if
the source chroot contains POSIX ACL xattrs set by dpkg at install time.
Linux 6.1 squashfs driver then fails with "unable to read xattr id index
table" and refuses to mount the filesystem.
Strip all xattrs from the chroot via Python3 (already present) immediately
before mksquashfs runs. With an xattr-free source tree the resulting
squashfs is guaranteed to have SQUASHFS_INVALID_BLK in the xattr field.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--chroot-squashfs-compression-options does not exist in live-build
bookworm (1:20230502). The correct mechanism is the MKSQUASHFS_OPTIONS
environment variable read by binary_rootfs.
Export MKSQUASHFS_OPTIONS="-no-xattrs" before lb build so live-build's
binary_rootfs picks it up, and add -no-xattrs explicitly to every
direct mksquashfs call in build.sh (fast-path repack and the dormant
split-layers function). Remove the invalid lb config option.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--chroot-squashfs-options is not a valid lb_config option; the correct
name is --chroot-squashfs-compression-options. Without this fix lb config
aborts immediately, so the -no-xattrs flag (which prevents the
"unable to read xattr id index table" boot failure) was never applied.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Kernel squashfs driver fails with "unable to read xattr id index table"
when the squashfs contains POSIX ACL xattrs (system.posix_acl_*) written
by mksquashfs as unrecognised entries. This caused every built ISO to
drop to an initramfs shell at boot.
Add -no-xattrs to mksquashfs options so xattrs are stripped at build
time. xattrs are not needed in a live read-only rootfs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
split_live_squashfs_layers moved /usr out of filesystem.squashfs into a
separate 10-usr.squashfs, leaving a rootfs skeleton that live-boot
(1:20230131+deb12u1) cannot mount: the initramfs panics with
"Can not mount /dev/loop0 ... filesystem.squashfs".
live-boot in bookworm expects a single self-contained filesystem.squashfs.
Revert to the standard single-squashfs layout and remove the dead
multi-squashfs guard in needs_full_build().
The split_live_squashfs_layers function is kept for future reference.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
trap RETURN is a bash extension not supported by /bin/sh on Debian.
With set -e active the unsupported trap call exited the build immediately
after lb build, before bootloader sync and ISO copy steps ran.
Remove both trap RETURN lines — explicit rm -rf at the end of the
function is sufficient for cleanup on the happy path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New in chart:
- event_logs and platform_config sections in viewer
- Storage columns: logical_block_size_bytes, physical_block_size_bytes,
metadata_bytes_per_block
- Compact status/severity icons, severity filtering for event logs
- Fixed JS MIME type and base stylesheet
bee audit schema already has all required fields; no schema changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
GRUB's PNG reader (grub2 bookworm) fails to load bee-logo.png despite the
file being valid RGB 8-bit non-interlaced PNG with minimal chunks. Root
cause is a known fragility in GRUB's png.c; exact trigger is unknown.
Switch to uncompressed 24-bit TGA which bypasses the PNG parser entirely.
tga.mod is already present in the ISO (x86_64-efi/tga.mod).
- Convert bee-logo.png → bee-logo.tga (480018 bytes, BGR top-left)
- config.cfg: insmod png → insmod tga
- theme.txt: bee-logo.png → bee-logo.tga
- Document all prior failed attempts in git-bible/grub-bitmap-error.md
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IPMI hang fix (Lenovo XCC SR650 V3):
- Add pluggable ipmi_profile system with per-vendor timeouts and fruEarlyExit flag
- Lenovo profile: 90s FRU timeout, streaming early-exit stops after PSU blocks found
- collectFRUEarlyExit streams ipmitool fru print and kills process once PSU blocks
are followed by a non-PSU header (~6s instead of ~108s on 54-device FRU list)
- collectBMCFirmware and collectPSUs accept manufacturer and apply profile timeouts
VROC license detection:
- Detect VMD/VROC controller in PCIe list, run mdadm --detail-platform
- Parse "License:" line; store as snap.VROCLicense in HardwareSnapshot
Blackbox service fix:
- bee-blackbox.service was missing from systemctl enable list in ISO build hook
- Service never started on boot; state file never written; UI button stayed "Enable"
Drop qrencode:
- Remove from package list, standardTools API check, and runtime-flows doc
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
config/bootloaders was missing from the needs_full_build heavy-file
list, so changes to GRUB theme assets (e.g. bee-logo.png RGBA→RGB fix
in 333c44f) were silently skipped by the squashfs-surgery fast-path.
The old broken PNG stayed in boot/grub/live-theme/ inside the ISO.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reads the iommu_group symlink for each BDF and exposes the group number
as iommu_group in the hardware snapshot JSON.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
GRUB does not support RGBA PNG (color_type=6) — loading it returns a
null bitmap, triggering "null src bitmap in grub_video_bitmap_create_scaled".
Alpha channel composited onto black background (#000000 matches desktop-color).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When only light files changed since the last full lb build (Go source,
overlay scripts/configs), the build is now automatically done in ~5-8 min
instead of 30+ min:
- unsquashfs existing squashfs from prior build
- rsync overlay-stage on top
- mksquashfs repack (zstd, same block size)
- xorriso ISO repack with -boot_image any replay (preserves EFI/MBR hybrid)
Heavy changes (VERSIONS, package-lists, hooks, archives, Dockerfile,
auto/config) still trigger a full lb build. Tracking is via a marker file
(.bee-full-build-marker) written after each successful full build.
No change to build-in-container.sh or the full build path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Convert bee-logo.png to RGBA (color type 6) and strip all metadata
chunks (cHRM, bKGD, tIME, tEXt) that confuse GRUB's minimal PNG parser
- Move terminal_output gfxterm before insmod png / theme load so the
theme initialises in an active gfxterm context
- Remove echo ASCII art banner from grub.cfg — with gfxterm active and
no terminal_box in the theme, echo output renders over the menu area
- Fix icon_heigh typo → icon_height; increase item_height 16→20 with
item_padding 0→2 for reliable text rendering in boot_menu
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
