Every GPU-selection picker (Load/SAT, Burn, Benchmark) now renders the
card serial: "GPU N — <model> · <mem> MiB · sn: <serial>". The serial is
monospace and the digits that differ across the listed GPUs (common
prefix/suffix stripped) are emphasised so operators can tell cards apart.
Row markup was duplicated across three pages (and twice within
page_validate.go). Consolidated into a single module,
internal/webui/gpu_picker.go: beeGpuPicker.render({...}) builds every row;
gpuPickerCSS/gpuPickerJS are injected once by layoutHead/renderPage. Pages
keep their own selection-note text and multi-GPU toggles but no longer
hand-build <label> markup.
ListNvidiaGPUs() adds the serial via nvidia-smi --query-gpu=...,serial;
N/A is normalised to empty. Serial flows to the client unchanged through
the existing /api/gpu/nvidia JSON response.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AudE3Q2nd9kxxVuxPKcTho
NVIDIA GPUs deliberately downclock PCIe to Gen1 at idle for power
saving, and applyPCIeLinkSpeedWarning fired on every idle collector
pass regardless - since component-status DB records never downgrade
(Record() only ever raises severity), one boot-time idle sample
permanently pinned pcie:gpu:nvidia to Warning for the rest of the
session even after every load-bearing GPU SAT test passed clean. Two
prior fixes (nvidia-smi-sourced link speed, pcie_aspm=off boot flag)
didn't hold up against this hardware/driver combination - see
bible-local/decisions/2026-08-24-pcie-gpu-gen1-idle-warning.md for the
full history.
Rather than add a downgrade path, stop writing an unverified status in
the first place: parseLspciDevice no longer calls
applyPCIeLinkSpeedWarning on the idle path. LinkSpeed/MaxLinkSpeed stay
populated as plain descriptive fields; only a verified-under-load
caller may now turn them into a status verdict.
Two new SAT targets provide that verified signal:
- pcie-link (platform/pcie_link_check.go): forces every enabled PCIe
device - not just GPUs - to retrain via the PCIe spec's Link Control
"Retrain Link" bit, then compares the negotiated speed against the
device's max. Covers NICs/HBAs/switches that have no bee-gpu-burn
equivalent load tool. Classifies by PCI class code + vendor ID, not
name substrings. Routes gpu_nvidia/gpu_amd/other sub-verdicts into
their own component-status keys so a degraded NIC never reads as a
GPU fault.
- nvidia-pcie-bandwidth (platform/nvidia_pcie_bandwidth.go): drives
real host<->device traffic via dcgmi diag -r nvbandwidth and
resamples link speed immediately after, independent of nvbandwidth's
own pass/fail.
Both wired into the task queue/webui the same way as nvidia-config
(routes, dispatch, priority, Validate page cards, Run All Check SAT).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds BEE_HOSTNAME, derived with the same easy-bee-<variant>-v<version>
scheme already used for ISO_BASENAME/SQUASHFS_FILENAME/BEE_ISO_VOLUME, and
wires it into auto/config via lb config --hostname. Documented the shared
naming scheme as a runtime-flows.md invariant.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
pci=realloc was forcing a full PCI resource reallocation on every default
and toram boot, added as a GPU BAR workaround for BIOS without Above 4G
Decoding. On a dense NVMe-backplane server it exhausted MMIO32 space and
silently dropped 4 of 6 NVMe controllers from the OS even though the BIOS
and lspci both saw them fine. It now only applies to the no-GUI/gsp-off
troubleshooting entry, alongside a bible-local ADR for the two prior
rounds of SAT/blackbox durability work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
nvidia-smi exposes reset_status.reset_required and remapped_rows.* only on
newer drivers for Ampere+ GPUs; queried via a separate exec call since an
unrecognized field name fails the whole --query-gpu command and would have
wiped out unrelated telemetry (temp/ECC/power) on older drivers otherwise.
Also refines Xid severity in both the ingest dmesg collector and the
always-on kmsg watcher: Xid 64 (row-remap InfoROM write failure) now
escalates to Critical instead of the generic warning every other Xid got,
and fixes the SAT-window flush path which previously hardcoded "Warning"
and ignored pattern severity entirely.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A (hardware-ingest-json v2.8-2.9): remove sensor location fields from schema
and collector; tag HardwareMemory.Location as json:"-"; add PlatformConfig to
HardwareSnapshot.
B (no-hardcoded-vendors): consolidate PCI vendor IDs into collector/pci_vendors.go;
replace all vendor-name string checks in isGPUDevice, isNVIDIADevice, isMellanoxDevice,
isAMDGPUDevice, matchesGPUVendor (sat_overlay), and validateIsVendorGPU (page_validate)
with numeric vendor_id comparisons.
C (module-structure): split app/app.go (1413 lines) into app.go + app_format.go,
app_network.go, app_services.go, app_packs.go, app_install.go — no logic changes.
D (go-code-style): wrap bare return err in interfaceAdminState and
interfaceIPv4Addrs (platform/network.go) with fmt.Errorf context including
the interface name.
E (go-project-bible): add bible-local/architecture/data-model.md and
bible-local/architecture/api-surface.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Disabled PCIe devices (sysfs enable==0) carry no data traffic; their
link state has no operational impact. Switchtec PCIe switch management
endpoints on NVIDIA HGX H100 baseboards (and similar fabric controllers)
train at reduced speed intentionally and were producing spurious warnings.
Check is vendor-agnostic: reads enable attribute via existing helper,
no vendor/device ID hardcoding.
Documented in bible-local/decisions/2026-06-12-pcie-disabled-device-link-warning.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
nvtop pulled nvidia-tesla-470-* via Recommends into the nogpu build.
Move it from bee.list.chroot into bee-nvidia and bee-amd lists so it
only appears in GPU variants.
Also remove the stray git-bible/ directory (was not gitignored) and
move grub-bitmap-error docs into bible-local/docs/.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IPMI hang fix (Lenovo XCC SR650 V3):
- Add pluggable ipmi_profile system with per-vendor timeouts and fruEarlyExit flag
- Lenovo profile: 90s FRU timeout, streaming early-exit stops after PSU blocks found
- collectFRUEarlyExit streams ipmitool fru print and kills process once PSU blocks
are followed by a non-PSU header (~6s instead of ~108s on 54-device FRU list)
- collectBMCFirmware and collectPSUs accept manufacturer and apply profile timeouts
VROC license detection:
- Detect VMD/VROC controller in PCIe list, run mdadm --detail-platform
- Parse "License:" line; store as snap.VROCLicense in HardwareSnapshot
Blackbox service fix:
- bee-blackbox.service was missing from systemctl enable list in ISO build hook
- Service never started on boot; state file never written; UI button stayed "Enable"
Drop qrencode:
- Remove from package list, standardTools API check, and runtime-flows doc
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
grub-efi/grub.cfg: add KMS+GSP=off entry (was in isolinux, missing in GRUB)
isolinux/live.cfg.in: add full standard param set to all entries
(net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always
numa_balancing=disable nowatchdog nosoftlockup) to match grub-efi
bible-local/docs/iso-build-rules.md: add bootloader sync rule documenting
that grub-efi and isolinux must be kept in sync manually, listing canonical
entries and standard param set, and noting the grub-pc/grub-efi history.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- nvidia.go: add Name field to nvidiaGPUInfo, include model name in
nvidia-smi query, set dev.Model in enrichPCIeWithNVIDIAData
- pages.go: fix duplicate GPU count in validate card summary (4 GPU: 4 x …
→ 4 x … GPU); fix PSU UNKNOWN fallback from hw.PowerSupplies; treat
activating/deactivating/reloading service states as OK in Runtime Health
- support_bundle.go: use "150405" time format (no colons) for exFAT compat
- sat.go / benchmark.go / platform_stress.go / sat_fan_stress.go: remove
.tar.gz archive creation from export dirs — export packs everything itself
- charts_svg.go: add min-max downsampling (1400 pt cap) for SVG chart perf
- benchmark_report.go / sat.go: normalize GPU fallback to "Unknown GPU"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Sample server power (IPMI dcmi) during baseline+steady phases in parallel;
compute delta vs GPU-reported sum; flag ratio < 0.75 as unreliable reporting
- Collect base_graphics_clock_mhz, multiprocessor_count, default_power_limit_w
from nvidia-smi alongside existing GPU info
- Add tops_per_sm_per_ghz efficiency metric (model-agnostic silicon quality signal)
- Flag when enforced power limit is below default TDP by >5%
- Add fp64 profile to bee-gpu-burn worker (CUDA_R_64F, CUBLAS_COMPUTE_64F, min cc 8.0)
- Improve Executive Summary: overall pass count, FAILED GPU finding
- Throttle counters now shown as % of steady window instead of raw microseconds
- bible-local: clock calibration research, H100/H200 spec, real-world GEMM baselines
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- nvidia collector: read pcie.link.gen.current/max from nvidia-smi instead
of sysfs to avoid false Gen1 readings when GPU is in ASPM idle state
- build: remove bee-nccl-gpu-stress from rm -f list so shell script from
overlay is not silently dropped from the ISO
- smoketest: add explicit checks for bee-gpu-burn, bee-john-gpu-stress,
bee-nccl-gpu-stress, all_reduce_perf
- netconf: re-exec via sudo when not root to fix RTNETLINK/resolv.conf errors
- auto/config: reduce loglevel 7→3 to show clean systemd output on boot
- auto/config: blacklist snd_hda_intel and related audio modules (unused on servers)
- package-lists: remove firmware-intel-sound and firmware-amd-graphics from
base list; move firmware-amd-graphics to bee-amd variant only
- bible-local: mark memtest ADR resolved, document working solution
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- jobState now has optional cancel func; abort() calls it if job is running
- handleAPISATRun passes cancellable context to RunNvidiaAcceptancePackWithOptions
- POST /api/sat/abort?job_id=... cancels the running SAT job
- bible-local/runtime-flows.md: replace TUI SAT flow with Web UI flow
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- One engine: go-analyze/charts (grafana theme) for all live metrics
- Server chart: CPU temp, CPU load%, mem load%, power W, fan RPMs
- GPU charts: temp, load%, mem%, power W — one card per GPU, added dynamically
- Charts 1400x280px SVG, rendered at width:100% in single-column layout
- Add CPU load (from /proc/stat) and mem load (from /proc/meminfo) to LiveMetricSample
- Add GPU mem utilization to GPUMetricRow (nvidia-smi utilization.memory)
- Document charting architecture in bible-local/architecture/charting.md
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BMC:
- collector/board.go: collectBMCFirmware() via ipmitool mc info, graceful skip if /dev/ipmi0 absent
- collector/collector.go: append BMC firmware record to snap.Firmware
- app/panel.go: show BMC version in TUI right-panel header alongside BIOS
CPU SAT:
- platform/sat.go: RunCPUAcceptancePack(baseDir, durationSec) — lscpu + sensors before/after + stress-ng
- app/app.go: RunCPUAcceptancePack + RunCPUAcceptancePackResult methods, satRunner interface updated
- app/panel.go: CPU row now reads real PASS/FAIL from cpu-*/summary.txt via satStatuses(); cpuDetailResult shows last SAT summary + audit data
- tui/types.go: actionRunCPUSAT, confirmBody for CPU test with mode label
- tui/screen_health_check.go: hcCPUDurations [60,300,900]s; hcRunSingle(CPU)→confirm screen; executeRunAll uses RunCPUAcceptancePackResult
- tui/forms.go: actionRunCPUSAT → RunCPUAcceptancePackResult with mode duration
- cmd/bee/main.go: bee sat cpu [--duration N] subcommand
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace 12-item flat menu with 4-item main menu: Health Check, Export support bundle, Settings, Exit
- Add Health Check screen (Lenovo-style): per-component checkboxes (GPU/MEM/DISK/CPU), Quick/Standard/Express modes, Run All, letter hotkeys G/M/S/C/R/A/1/2/3
- Add two-column main screen: left = menu, right = hardware panel with colored PASS/FAIL/CANCEL/N/A status per component; Tab/→ switches focus, Enter opens component detail
- Add app.LoadHardwarePanel() + ComponentDetailResult() reading audit JSON and SAT summary.txt files
- Move Network/Services/audit actions into Settings submenu
- Export: support bundle only (remove separate audit JSON export)
- Delete screen_acceptance.go; add screen_health_check.go, screen_settings.go, app/panel.go
- Add BMC + CPU stress-ng tests to backlog
- Update bible submodule
- Rewrite tui_test.go for new screen/action structure
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- TUI: duration presets (10m/1h/8h/24h), GPU multi-select checkboxes
- nvtop launched concurrently with SAT via tea.ExecProcess; can reopen or abort
- GPU metrics collected per-second during bee-gpu-stress (temp/usage/power/clock)
- Outputs: gpu-metrics.csv, gpu-metrics.html (offline SVG), gpu-metrics-term.txt
- Terminal chart: asciigraph-style line chart with box-drawing chars and ANSI colours
- AUDIT_VERSION bumped 0.1.1 → 1.0.0; nvtop added to ISO package list
- runtime-flows.md updated with full NVIDIA SAT TUI flow documentation
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
