Adds a "Multi-GPU tests — use all GPUs" checkbox to the NVIDIA GPU
selector (checked by default). When enabled, PSU Pulse, NCCL, and
NVBandwidth tests run on every GPU in the system regardless of the
per-GPU selection above — which is required for correct PSU stress
testing (synchronous pulses across all GPUs create worst-case
transients). When unchecked, only the manually selected GPUs are used.
The same logic applies both to Run All (expandSATTarget) and to the
individual Run button on each multi-GPU test card.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
pulse_test is a PSU/power-delivery test, not a per-GPU compute test.
Its purpose is to synchronously pulse all GPUs between idle and full
load to create worst-case transient spikes on the power supply.
Running it one GPU at a time would produce a fraction of the PSU load
and miss any PSU-level failures.
- Move nvidia-pulse from nvidiaPerGPUTargets to nvidiaAllGPUTargets
(same dispatch path as NCCL and NVBandwidth)
- Change card onclick to runNvidiaFabricValidate (all selected GPUs at once)
- Update card title to "NVIDIA PSU Pulse Test" and description to
explain why synchronous multi-GPU execution is required
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
nvidia-interconnect (NCCL all_reduce_perf) and nvidia-bandwidth
(NVBandwidth) verify fabric connectivity and bandwidth — they are
not sustained burn loads. Move both from the Burn section to the
Validate section under the stress-mode toggle, alongside the other
DCGM diagnostic tests moved in the previous commit.
- Add sat-card-nvidia-interconnect and sat-card-nvidia-bandwidth
validate cards (stress-only, all selected GPUs at once)
- Add runNvidiaFabricValidate() for all-GPU-at-once dispatch
- Add nvidiaAllGPUTargets handling in expandSATTarget/runAllSAT
- Remove Interconnect / Bandwidth card from Burn section
- Remove nvidia-interconnect and nvidia-bandwidth from runAllBurnTasks
and the gpu/tools availability map
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-gpu-stress.c: remove per-wave cuCtxSynchronize barrier in both
cuBLASLt and PTX hot loops; sync at most once/sec so the GPU queue
stays continuously full — eliminates the CPU↔GPU ping-pong that
prevented reaching full TDP
- sat_fan_stress.go: default SizeMB 0 (auto = 95% VRAM) instead of
hardcoded 64 MB; tiny matrices caused <0.1 ms kernels where CPU
re-queue overhead dominated
- pages.go: move nvidia-targeted-power and nvidia-pulse from Burn →
Validate stress section alongside nvidia-targeted-stress; these are
DCGM pass/fail diagnostics, not sustained burn loads; remove the
Power Delivery / Power Budget card from Burn entirely
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add parallel GPU mode (checkbox, off by default): runs all selected GPUs
simultaneously via a single bee-gpu-burn invocation instead of sequentially;
per-GPU telemetry, throttle counters, TOPS, and scoring are preserved
- Make queryBenchmarkGPUInfo resilient: falls back to a base field set when
extended fields (attribute.multiprocessor_count, power.default_limit) cause
exit status 2, preventing lgc normalization from being silently skipped
- Log explicit "graphics clock lock skipped" note when inventory is unavailable
- Collect server model from DMI (/sys/class/dmi/id/product_name) and store in
result JSON; benchmark history columns now show "Server Model (N× GPU Model)"
grouped by server+GPU type rather than individual GPU index
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
PowerSustainScore now uses DefaultPowerLimitW as reference so a
manually reduced power limit does not inflate the score. Falls back
to enforced limit if default is unavailable.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Sample server power (IPMI dcmi) during baseline+steady phases in parallel;
compute delta vs GPU-reported sum; flag ratio < 0.75 as unreliable reporting
- Collect base_graphics_clock_mhz, multiprocessor_count, default_power_limit_w
from nvidia-smi alongside existing GPU info
- Add tops_per_sm_per_ghz efficiency metric (model-agnostic silicon quality signal)
- Flag when enforced power limit is below default TDP by >5%
- Add fp64 profile to bee-gpu-burn worker (CUDA_R_64F, CUBLAS_COMPUTE_64F, min cc 8.0)
- Improve Executive Summary: overall pass count, FAILED GPU finding
- Throttle counters now shown as % of steady window instead of raw microseconds
- bible-local: clock calibration research, H100/H200 spec, real-world GEMM baselines
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
losetup --replace --direct-io=on fails with EINVAL when the target file
is on tmpfs (/dev/shm), because tmpfs does not support O_DIRECT.
Strip the --direct-io flag from the replace call and downgrade the
verification failure to a warning so boot continues.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Servers with NVIDIA compute GPUs (H100 etc.) have no display output,
so KMS blanks the console. nomodeset disables kernel modesetting and
lets the NVIDIA proprietary driver handle display via Xorg.
KMS variant moved to advanced submenu for cases where it is needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-nvidia-load: run insmod in background, poll /proc/devices for
nvidiactl; if GSP init doesn't complete in 90s, kill insmod and retry
with NVreg_EnableGpuFirmware=0. Handles EBUSY case with clear error.
- Write /run/bee-nvidia-mode (gsp-on/gsp-off/gsp-stuck) for audit layer
- Show GSP mode badge in sidebar: yellow for gsp-off, red for gsp-stuck
- Report NvidiaGSPMode in RuntimeHealth with issue entries
- Simplify GRUB menu: default (KMS+GSP), advanced submenu (GSP=off,
nomodeset, fail-safe), remove load-to-RAM entry
- Add pcmanfm, ristretto, mupdf, mousepad to desktop packages
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- services.go: use sudo systemctl so bee user can control system services
- api.go: always return 200 with output field even on error, so the
frontend shows the actual systemctl message instead of "exit status 1"
- pages.go: button shows "..." while pending then restores label;
output panel is full-width under the table with ✓/✗ status indicator;
output auto-scrolls to bottom
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
bee-gpu-burn now receives --seconds <LoadSec> so it exits naturally
when the cycle ends, rather than relying solely on context cancellation
to kill it. Process group kill (Setpgid+Cancel) is kept as a safety net
for early cancellation (user stop, context timeout). Same fix for AMD
RVS which now gets duration_ms = LoadSec * 1000.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
nvvs (DCGM validation suite) survives when dcgmi is killed mid-run,
leaving the GPU occupied. The next dcgmi diag invocation then fails
with "affected resource is in use".
Two-part fix:
- Add nvvs and dcgmi to KillTestWorkers patterns so they are cleaned
up by the global cancel handler
- Call KillTestWorkers at the start of RunNvidiaTargetedStressValidatePack
to clear any stale processes before dcgmi diag runs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
bee-gpu-burn is a shell script that spawns bee-gpu-burn-worker children.
exec.CommandContext default cancel only kills the shell parent; the worker
processes survive and keep loading the GPU indefinitely.
Fix: set Setpgid=true and a custom Cancel that sends SIGKILL to the
entire process group (-pid), same pattern already used in runSATCommandCtx.
Applied to Nvidia, AMD, and CPU stress commands for consistency.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add feh and python3-pil to package list
- Add chroot hook that generates /usr/share/bee/wallpaper.png using PIL:
black background, EASY-BEE box-drawing logo in amber (#f6c90e),
"Hardware Audit LiveCD" subtitle in dim amber — matches motd exactly
- bee-openbox-session: set wallpaper with feh --bg-fill, fall back to
xsetroot -solid black if wallpaper not found
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Set xsetroot solid background (#12100a, dark amber) so openbox
doesn't show bare black before Chromium opens
- Re-add healthz wait loop before launching Chromium: without it
Chromium opens localhost/loading before bee-web is up and gets
connection-refused which renders as a blank white page
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add TTYReset=yes and TTYVHangup=yes so systemd restores the terminal
to a clean state before handing tty1 to getty. Without this the screen
went black with no cursor after the status display finished.
Also remove DefaultDependencies=no which was too aggressive.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Command substitution in sh strips trailing newlines, so accumulating
output in a variable via $(...) lost all line breaks. Reverted to
direct printf calls which work correctly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Refresh every 3s instead of 1s to reduce flicker
- Show ssh, bee-sshsetup in service list
- Show failure reason for failed services
- Show last journal line for activating services
- Show IP addresses and web UI URL when network is up
- Render frame to variable before printing to reduce flicker
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
loglevel=6 floods the screen with mpt3sas/scsi/sd informational
messages, hiding systemd service status and bee-boot-status display.
loglevel=3 shows only kernel errors; all messages still go to serial.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add bee-boot-status service: shows live service status on tty1 with
ASCII logo before getty, exits when all bee services settle
- Remove lightdm dependency on bee-preflight so GUI starts immediately
without waiting for NVIDIA driver load
- Replace Chromium blank-page problem with /loading spinner page that
polls /api/services and auto-redirects when services are ready; add
"Open app now" override button; use fresh --user-data-dir=/tmp/bee-chrome
- Unify branding: add "Hardware Audit LiveCD" subtitle to GRUB menu,
bee-boot-status (with yellow ASCII logo), and web spinner
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
