Add ramp-up mode to NVIDIA GPU benchmark

Adds a new checkbox (enabled by default) in the benchmark section.
In ramp-up mode N tasks are spawned simultaneously: 1 GPU, then 2,
then 3, up to all selected GPUs — each step runs its GPUs in parallel.
NCCL runs only on the final step.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

audit/internal/app/support_bundle.go

@@ -213,7 +213,7 @@ func BuildSupportBundle(exportDir string) (string, error) {
 
 	now := time.Now().UTC()
 	date := now.Format("2006-01-02")
-	tod := now.Format("15:04:05")
+	tod := now.Format("150405")
 	ver := bundleVersion()
 	model := serverModelForBundle()
 	sn := serverSerialForBundle()

audit/internal/collector/pcie.go

@@ -2,6 +2,7 @@ package collector
 
 import (
 	"bee/audit/internal/schema"
+	"fmt"
 	"log/slog"
 	"os/exec"
 	"strconv"
@@ -172,6 +173,9 @@ func parseLspciDevice(fields map[string]string) schema.HardwarePCIeDevice {
 
 	// SVendor/SDevice available but not in schema — skip
 
+	// Warn if PCIe link is running below its maximum negotiated speed.
+	applyPCIeLinkSpeedWarning(&dev)
+
 	return dev
 }
 
@@ -241,6 +245,41 @@ func readPCIStringAttribute(bdf, attribute string) (string, bool) {
 	return value, true
 }
 
+// applyPCIeLinkSpeedWarning sets the device status to Warning if the current PCIe link
+// speed is below the maximum negotiated speed supported by both ends.
+func applyPCIeLinkSpeedWarning(dev *schema.HardwarePCIeDevice) {
+	if dev.LinkSpeed == nil || dev.MaxLinkSpeed == nil {
+		return
+	}
+	if pcieLinkSpeedRank(*dev.LinkSpeed) < pcieLinkSpeedRank(*dev.MaxLinkSpeed) {
+		warn := statusWarning
+		dev.Status = &warn
+		desc := fmt.Sprintf("PCIe link speed degraded: running at %s, capable of %s", *dev.LinkSpeed, *dev.MaxLinkSpeed)
+		dev.ErrorDescription = &desc
+	}
+}
+
+// pcieLinkSpeedRank returns a numeric rank for a normalized Gen string (e.g. "Gen4" → 4).
+// Returns 0 for unrecognised values so comparisons fail safe.
+func pcieLinkSpeedRank(gen string) int {
+	switch gen {
+	case "Gen1":
+		return 1
+	case "Gen2":
+		return 2
+	case "Gen3":
+		return 3
+	case "Gen4":
+		return 4
+	case "Gen5":
+		return 5
+	case "Gen6":
+		return 6
+	default:
+		return 0
+	}
+}
+
 func normalizePCILinkSpeed(raw string) string {
 	raw = strings.TrimSpace(strings.ToLower(raw))
 	switch {

audit/internal/collector/pcie_filter_test.go

@@ -1,6 +1,7 @@
 package collector
 
 import (
+	"bee/audit/internal/schema"
 	"encoding/json"
 	"strings"
 	"testing"
@@ -141,3 +142,77 @@ func TestNormalizePCILinkSpeed(t *testing.T) {
 		}
 	}
 }
+
+func TestApplyPCIeLinkSpeedWarning(t *testing.T) {
+	ptr := func(s string) *string { return &s }
+
+	tests := []struct {
+		name        string
+		linkSpeed   *string
+		maxSpeed    *string
+		wantWarning bool
+		wantGenIn   string // substring expected in ErrorDescription when warning
+	}{
+		{
+			name:        "degraded Gen1 vs Gen5",
+			linkSpeed:   ptr("Gen1"),
+			maxSpeed:    ptr("Gen5"),
+			wantWarning: true,
+			wantGenIn:   "Gen1",
+		},
+		{
+			name:        "at max Gen5",
+			linkSpeed:   ptr("Gen5"),
+			maxSpeed:    ptr("Gen5"),
+			wantWarning: false,
+		},
+		{
+			name:        "degraded Gen4 vs Gen5",
+			linkSpeed:   ptr("Gen4"),
+			maxSpeed:    ptr("Gen5"),
+			wantWarning: true,
+			wantGenIn:   "Gen4",
+		},
+		{
+			name:        "missing current speed — no warning",
+			linkSpeed:   nil,
+			maxSpeed:    ptr("Gen5"),
+			wantWarning: false,
+		},
+		{
+			name:        "missing max speed — no warning",
+			linkSpeed:   ptr("Gen1"),
+			maxSpeed:    nil,
+			wantWarning: false,
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			dev := schema.HardwarePCIeDevice{}
+			ok := statusOK
+			dev.Status = &ok
+			dev.LinkSpeed = tt.linkSpeed
+			dev.MaxLinkSpeed = tt.maxSpeed
+
+			applyPCIeLinkSpeedWarning(&dev)
+
+			gotWarn := dev.Status != nil && *dev.Status == statusWarning
+			if gotWarn != tt.wantWarning {
+				t.Fatalf("wantWarning=%v gotWarning=%v (status=%v)", tt.wantWarning, gotWarn, dev.Status)
+			}
+			if tt.wantWarning {
+				if dev.ErrorDescription == nil {
+					t.Fatal("expected ErrorDescription to be set")
+				}
+				if !strings.Contains(*dev.ErrorDescription, tt.wantGenIn) {
+					t.Fatalf("ErrorDescription %q does not contain %q", *dev.ErrorDescription, tt.wantGenIn)
+				}
+			} else {
+				if dev.ErrorDescription != nil {
+					t.Fatalf("unexpected ErrorDescription: %s", *dev.ErrorDescription)
+				}
+			}
+		})
+	}
+}

audit/internal/platform/benchmark.go

@@ -121,15 +121,22 @@ func (s *System) RunNvidiaBenchmark(ctx context.Context, baseDir string, opts Nv
 	var serverIdleOK, serverLoadedOK bool
 	var serverLoadedSamples int
 
+	// Run nvidia-smi -q first: used both for the log file and as a fallback
+	// source of max clock values when CSV clock fields are unsupported.
+	var nvsmiQOut []byte
+	if out, err := runSATCommandCtx(ctx, verboseLog, "00-nvidia-smi-q.log", []string{"nvidia-smi", "-q"}, nil, nil); err == nil {
+		nvsmiQOut = out
+		_ = os.WriteFile(filepath.Join(runDir, "00-nvidia-smi-q.log"), out, 0644)
+	}
+
 	infoByIndex, infoErr := queryBenchmarkGPUInfo(selected)
 	if infoErr != nil {
 		result.Warnings = append(result.Warnings, "gpu inventory query failed: "+infoErr.Error())
 		result.Normalization.Status = "partial"
 	}
-
+	// Enrich with max clocks from verbose output — covers GPUs where
-	if out, err := runSATCommandCtx(ctx, verboseLog, "00-nvidia-smi-q.log", []string{"nvidia-smi", "-q"}, nil, nil); err == nil {
+	// clocks.max.* CSV fields are unsupported (e.g. Blackwell / driver 98.x).
-		_ = os.WriteFile(filepath.Join(runDir, "00-nvidia-smi-q.log"), out, 0644)
+	enrichGPUInfoWithMaxClocks(infoByIndex, nvsmiQOut)
-	}
 
 	activeApps, err := queryActiveComputeApps(selected)
 	if err == nil && len(activeApps) > 0 {
@@ -335,11 +342,7 @@ func (s *System) RunNvidiaBenchmark(ctx context.Context, baseDir string, opts Nv
 		return "", fmt.Errorf("write summary.txt: %w", err)
 	}
 
-	archive := filepath.Join(baseDir, "gpu-benchmark-"+ts+".tar.gz")
+	return runDir, nil
-	if err := createTarGz(archive, runDir); err != nil {
-		return "", fmt.Errorf("pack benchmark archive: %w", err)
-	}
-	return archive, nil
 }
 
 func normalizeNvidiaBenchmarkOptionsForBenchmark(opts NvidiaBenchmarkOptions) NvidiaBenchmarkOptions {
@@ -374,9 +377,13 @@ func resolveBenchmarkProfile(profile string) benchmarkProfileSpec {
 // Fields are tried in order; the first successful query wins. Extended fields
 // (attribute.multiprocessor_count, power.default_limit) are not supported on
 // all driver versions, so we fall back to the base set if the full query fails.
+// The minimal fallback omits clock fields entirely — clocks.max.* returns
+// exit status 2 on some GPU generations (e.g. Blackwell); max clocks are
+// then recovered from nvidia-smi -q via enrichGPUInfoWithMaxClocks.
 var benchmarkGPUInfoQueries = []struct {
 	fields   string
 	extended bool // whether this query includes optional extended fields
+	minimal  bool // clock fields omitted; max clocks must be filled separately
 }{
 	{
 		fields:   "index,uuid,name,pci.bus_id,vbios_version,power.limit,clocks.max.graphics,clocks.max.memory,clocks.base.graphics,attribute.multiprocessor_count,power.default_limit",
@@ -386,6 +393,83 @@ var benchmarkGPUInfoQueries = []struct {
 		fields:   "index,uuid,name,pci.bus_id,vbios_version,power.limit,clocks.max.graphics,clocks.max.memory,clocks.base.graphics",
 		extended: false,
 	},
+	{
+		fields:  "index,uuid,name,pci.bus_id,vbios_version,power.limit",
+		minimal: true,
+	},
+}
+
+// enrichGPUInfoWithMaxClocks fills MaxGraphicsClockMHz / MaxMemoryClockMHz for
+// any GPU in infoByIndex where those values are still zero.  It parses the
+// "Max Clocks" section of nvidia-smi -q output (already available as nvsmiQ).
+// This is the fallback for GPUs (e.g. Blackwell) where clocks.max.* CSV fields
+// return exit status 2 but the verbose query works fine.
+func enrichGPUInfoWithMaxClocks(infoByIndex map[int]benchmarkGPUInfo, nvsmiQ []byte) {
+	if len(infoByIndex) == 0 || len(nvsmiQ) == 0 {
+		return
+	}
+
+	// Build bus_id → index map for matching verbose sections to GPU indices.
+	busToBenchIdx := make(map[string]int, len(infoByIndex))
+	for idx, info := range infoByIndex {
+		if info.BusID != "" {
+			// nvidia-smi -q uses "GPU 00000000:4E:00.0" (8-digit domain),
+			// while --query-gpu returns the same format; normalise to lower.
+			busToBenchIdx[strings.ToLower(strings.TrimSpace(info.BusID))] = idx
+		}
+	}
+
+	// Split the verbose output into per-GPU sections on "^GPU " lines.
+	gpuSectionRe := regexp.MustCompile(`(?m)^GPU\s+([\dA-Fa-f:\.]+)`)
+	maxGfxRe := regexp.MustCompile(`(?i)Max Clocks[\s\S]*?Graphics\s*:\s*(\d+)\s*MHz`)
+	maxMemRe := regexp.MustCompile(`(?i)Max Clocks[\s\S]*?Memory\s*:\s*(\d+)\s*MHz`)
+
+	sectionStarts := gpuSectionRe.FindAllSubmatchIndex(nvsmiQ, -1)
+	for i, loc := range sectionStarts {
+		busID := strings.ToLower(string(nvsmiQ[loc[2]:loc[3]]))
+		benchIdx, ok := busToBenchIdx[busID]
+		if !ok {
+			// Bus IDs from verbose output may have a different domain prefix;
+			// try suffix match on the slot portion (XX:XX.X).
+			for k, v := range busToBenchIdx {
+				if strings.HasSuffix(k, busID) || strings.HasSuffix(busID, k) {
+					benchIdx = v
+					ok = true
+					break
+				}
+			}
+		}
+		if !ok {
+			continue
+		}
+
+		info := infoByIndex[benchIdx]
+		if info.MaxGraphicsClockMHz > 0 && info.MaxMemoryClockMHz > 0 {
+			continue // already populated
+		}
+
+		end := len(nvsmiQ)
+		if i+1 < len(sectionStarts) {
+			end = sectionStarts[i+1][0]
+		}
+		section := nvsmiQ[loc[0]:end]
+
+		if info.MaxGraphicsClockMHz == 0 {
+			if m := maxGfxRe.FindSubmatch(section); m != nil {
+				if v, err := strconv.ParseFloat(string(m[1]), 64); err == nil {
+					info.MaxGraphicsClockMHz = v
+				}
+			}
+		}
+		if info.MaxMemoryClockMHz == 0 {
+			if m := maxMemRe.FindSubmatch(section); m != nil {
+				if v, err := strconv.ParseFloat(string(m[1]), 64); err == nil {
+					info.MaxMemoryClockMHz = v
+				}
+			}
+		}
+		infoByIndex[benchIdx] = info
+	}
 }
 
 func queryBenchmarkGPUInfo(gpuIndices []int) (map[int]benchmarkGPUInfo, error) {
@@ -413,9 +497,13 @@ func queryBenchmarkGPUInfo(gpuIndices []int) (map[int]benchmarkGPUInfo, error) {
 			continue
 		}
 
+		minFields := 6
+		if !q.minimal {
+			minFields = 9
+		}
 		infoByIndex := make(map[int]benchmarkGPUInfo, len(rows))
 		for _, row := range rows {
-			if len(row) < 9 {
+			if len(row) < minFields {
 				continue
 			}
 			idx, err := strconv.Atoi(strings.TrimSpace(row[0]))
@@ -423,24 +511,26 @@ func queryBenchmarkGPUInfo(gpuIndices []int) (map[int]benchmarkGPUInfo, error) {
 				continue
 			}
 			info := benchmarkGPUInfo{
-				Index:               idx,
+				Index:       idx,
-				UUID:                strings.TrimSpace(row[1]),
+				UUID:        strings.TrimSpace(row[1]),
-				Name:                strings.TrimSpace(row[2]),
+				Name:        strings.TrimSpace(row[2]),
-				BusID:               strings.TrimSpace(row[3]),
+				BusID:       strings.TrimSpace(row[3]),
-				VBIOS:               strings.TrimSpace(row[4]),
+				VBIOS:       strings.TrimSpace(row[4]),
-				PowerLimitW:         parseBenchmarkFloat(row[5]),
+				PowerLimitW: parseBenchmarkFloat(row[5]),
-				MaxGraphicsClockMHz: parseBenchmarkFloat(row[6]),
-				MaxMemoryClockMHz:   parseBenchmarkFloat(row[7]),
 			}
-			if len(row) >= 9 {
+			if !q.minimal {
-				info.BaseGraphicsClockMHz = parseBenchmarkFloat(row[8])
+				info.MaxGraphicsClockMHz = parseBenchmarkFloat(row[6])
-			}
+				info.MaxMemoryClockMHz = parseBenchmarkFloat(row[7])
-			if q.extended {
+				if len(row) >= 9 {
-				if len(row) >= 10 {
+					info.BaseGraphicsClockMHz = parseBenchmarkFloat(row[8])
-					info.MultiprocessorCount = int(parseBenchmarkFloat(row[9]))
 				}
-				if len(row) >= 11 {
+				if q.extended {
-					info.DefaultPowerLimitW = parseBenchmarkFloat(row[10])
+					if len(row) >= 10 {
+						info.MultiprocessorCount = int(parseBenchmarkFloat(row[9]))
+					}
+					if len(row) >= 11 {
+						info.DefaultPowerLimitW = parseBenchmarkFloat(row[10])
+					}
 				}
 			}
 			infoByIndex[idx] = info

audit/internal/platform/benchmark_report.go

@@ -90,7 +90,7 @@ func renderBenchmarkReportWithCharts(result NvidiaBenchmarkResult, charts []benc
 	for _, gpu := range result.GPUs {
 		name := strings.TrimSpace(gpu.Name)
 		if name == "" {
-			name = "Unknown"
+			name = "Unknown GPU"
 		}
 		interconnect := "-"
 		if gpu.Scores.InterconnectScore > 0 {

audit/internal/platform/benchmark_test.go

@@ -178,3 +178,67 @@ func TestRenderBenchmarkReportIncludesTerminalChartsWithoutANSI(t *testing.T) {
 		t.Fatalf("report should not contain ANSI escapes\n%s", report)
 	}
 }
+
+func TestEnrichGPUInfoWithMaxClocks(t *testing.T) {
+	t.Parallel()
+
+	nvsmiQ := []byte(`
+GPU 00000000:4E:00.0
+    Product Name                          : NVIDIA RTX PRO 6000 Blackwell Server Edition
+    Clocks
+        Graphics                          : 2422 MHz
+        Memory                            : 12481 MHz
+    Max Clocks
+        Graphics                          : 2430 MHz
+        SM                                : 2430 MHz
+        Memory                            : 12481 MHz
+        Video                             : 2107 MHz
+
+GPU 00000000:4F:00.0
+    Product Name                          : NVIDIA RTX PRO 6000 Blackwell Server Edition
+    Max Clocks
+        Graphics                          : 2430 MHz
+        Memory                            : 12481 MHz
+`)
+
+	infoByIndex := map[int]benchmarkGPUInfo{
+		0: {Index: 0, BusID: "00000000:4E:00.0"},
+		1: {Index: 1, BusID: "00000000:4F:00.0"},
+	}
+
+	enrichGPUInfoWithMaxClocks(infoByIndex, nvsmiQ)
+
+	if infoByIndex[0].MaxGraphicsClockMHz != 2430 {
+		t.Errorf("GPU 0 MaxGraphicsClockMHz = %v, want 2430", infoByIndex[0].MaxGraphicsClockMHz)
+	}
+	if infoByIndex[0].MaxMemoryClockMHz != 12481 {
+		t.Errorf("GPU 0 MaxMemoryClockMHz = %v, want 12481", infoByIndex[0].MaxMemoryClockMHz)
+	}
+	if infoByIndex[1].MaxGraphicsClockMHz != 2430 {
+		t.Errorf("GPU 1 MaxGraphicsClockMHz = %v, want 2430", infoByIndex[1].MaxGraphicsClockMHz)
+	}
+	if infoByIndex[1].MaxMemoryClockMHz != 12481 {
+		t.Errorf("GPU 1 MaxMemoryClockMHz = %v, want 12481", infoByIndex[1].MaxMemoryClockMHz)
+	}
+}
+
+func TestEnrichGPUInfoWithMaxClocksSkipsPopulated(t *testing.T) {
+	t.Parallel()
+
+	nvsmiQ := []byte(`
+GPU 00000000:4E:00.0
+    Max Clocks
+        Graphics                          : 9999 MHz
+        Memory                            : 9999 MHz
+`)
+	// Already populated — must not be overwritten.
+	infoByIndex := map[int]benchmarkGPUInfo{
+		0: {Index: 0, BusID: "00000000:4E:00.0", MaxGraphicsClockMHz: 2430, MaxMemoryClockMHz: 12481},
+	}
+
+	enrichGPUInfoWithMaxClocks(infoByIndex, nvsmiQ)
+
+	if infoByIndex[0].MaxGraphicsClockMHz != 2430 {
+		t.Errorf("expected existing value to be preserved, got %v", infoByIndex[0].MaxGraphicsClockMHz)
+	}
+}

audit/internal/platform/platform_stress.go

@@ -161,13 +161,7 @@ func (s *System) RunPlatformStress(
 	}
 	_ = os.WriteFile(filepath.Join(runDir, "summary.txt"), []byte(summary), 0644)
 
-	// Pack tar.gz
+	return runDir, nil
-	archivePath := filepath.Join(baseDir, "platform-stress-"+stamp+".tar.gz")
-	if err := packPlatformDir(runDir, archivePath); err != nil {
-		return "", fmt.Errorf("pack archive: %w", err)
-	}
-	_ = os.RemoveAll(runDir)
-	return archivePath, nil
 }
 
 // collectPhase samples live metrics every second until ctx is done.

audit/internal/platform/runtime.go

@@ -1,6 +1,7 @@
 package platform
 
 import (
+	"bufio"
 	"os"
 	"os/exec"
 	"strings"
@@ -114,6 +115,8 @@ func (s *System) CollectRuntimeHealth(exportDir string) (schema.RuntimeHealth, e
 	}
 
 	s.collectGPURuntimeHealth(vendor, &health)
+	s.collectToRAMHealth(&health)
+	s.collectUSBExportHealth(&health)
 
 	if health.Status != "FAILED" && len(health.Issues) > 0 {
 		health.Status = "PARTIAL"
@@ -168,6 +171,90 @@ func resolvedToolStatus(display string, candidates ...string) ToolStatus {
 	return ToolStatus{Name: display}
 }
 
+// collectToRAMHealth checks whether the LiveCD ISO has been copied to RAM.
+// Status values: "ok" = in RAM, "warning" = toram not active (no copy attempted),
+// "failed" = toram was requested but medium is not in RAM (copy failed or in progress).
+func (s *System) collectToRAMHealth(health *schema.RuntimeHealth) {
+	inRAM := s.IsLiveMediaInRAM()
+	active := toramActive()
+	switch {
+	case inRAM:
+		health.ToRAMStatus = "ok"
+	case active:
+		// toram was requested but medium is not yet/no longer in RAM
+		health.ToRAMStatus = "failed"
+		health.Issues = append(health.Issues, schema.RuntimeIssue{
+			Code:        "toram_copy_failed",
+			Severity:    "warning",
+			Description: "toram boot parameter is set but the live medium is not mounted from RAM.",
+		})
+	default:
+		health.ToRAMStatus = "warning"
+	}
+}
+
+// collectUSBExportHealth scans /proc/mounts for a writable USB-backed filesystem
+// suitable for log export. Sets USBExportPath to the first match found.
+func (s *System) collectUSBExportHealth(health *schema.RuntimeHealth) {
+	health.USBExportPath = findUSBExportMount()
+}
+
+// findUSBExportMount returns the mount point of the first writable USB filesystem
+// found in /proc/mounts (vfat, exfat, ext2/3/4, ntfs) whose backing block device
+// has USB transport. Returns "" if none found.
+func findUSBExportMount() string {
+	f, err := os.Open("/proc/mounts")
+	if err != nil {
+		return ""
+	}
+	defer f.Close()
+
+	// fs types that are expected on USB export drives
+	exportFSTypes := map[string]bool{
+		"vfat":  true,
+		"exfat": true,
+		"ext2":  true,
+		"ext3":  true,
+		"ext4":  true,
+		"ntfs":  true,
+		"ntfs3": true,
+		"fuseblk": true,
+	}
+
+	scanner := bufio.NewScanner(f)
+	for scanner.Scan() {
+		// fields: device mountpoint fstype options dump pass
+		fields := strings.Fields(scanner.Text())
+		if len(fields) < 4 {
+			continue
+		}
+		device, mountPoint, fsType, options := fields[0], fields[1], fields[2], fields[3]
+		if !exportFSTypes[strings.ToLower(fsType)] {
+			continue
+		}
+		// Skip read-only mounts
+		opts := strings.Split(options, ",")
+		readOnly := false
+		for _, o := range opts {
+			if strings.TrimSpace(o) == "ro" {
+				readOnly = true
+				break
+			}
+		}
+		if readOnly {
+			continue
+		}
+		// Check USB transport via lsblk on the device
+		if !strings.HasPrefix(device, "/dev/") {
+			continue
+		}
+		if blockDeviceTransport(device) == "usb" {
+			return mountPoint
+		}
+	}
+	return ""
+}
+
 func (s *System) collectGPURuntimeHealth(vendor string, health *schema.RuntimeHealth) {
 	lsmodText := commandText("lsmod")
 

audit/internal/platform/sat.go

@@ -662,11 +662,7 @@ func (s *System) RunStorageAcceptancePack(ctx context.Context, baseDir string, e
 	if err := os.WriteFile(filepath.Join(runDir, "summary.txt"), []byte(summary.String()), 0644); err != nil {
 		return "", err
 	}
-	archive := filepath.Join(baseDir, "storage-"+ts+".tar.gz")
+	return runDir, nil
-	if err := createTarGz(archive, runDir); err != nil {
-		return "", err
-	}
-	return archive, nil
 }
 
 type satJob struct {
@@ -852,11 +848,7 @@ func runAcceptancePackCtx(ctx context.Context, baseDir, prefix string, jobs []sa
 		}
 	}
 
-	archive := filepath.Join(baseDir, prefix+"-"+ts+".tar.gz")
+	return runDir, nil
-	if err := createTarGz(archive, runDir); err != nil {
-		return "", err
-	}
-	return archive, nil
 }
 
 func updateNvidiaGPUStatus(perGPU map[int]*nvidiaGPUStatusFile, idx int, status, jobName, detail string) {
@@ -919,7 +911,7 @@ func writeNvidiaGPUStatusFiles(runDir, overall string, perGPU map[int]*nvidiaGPU
 			entry.Health = "UNKNOWN"
 		}
 		if entry.Name == "" {
-			entry.Name = "unknown"
+			entry.Name = "Unknown GPU"
 		}
 		var body strings.Builder
 		fmt.Fprintf(&body, "gpu_index=%d\n", entry.Index)

audit/internal/platform/sat_fan_stress.go

@@ -223,11 +223,7 @@ func (s *System) RunFanStressTest(ctx context.Context, baseDir string, opts FanS
 		return "", err
 	}
 
-	archive := filepath.Join(baseDir, "fan-stress-"+ts+".tar.gz")
+	return runDir, nil
-	if err := createTarGz(archive, runDir); err != nil {
-		return "", err
-	}
-	return archive, nil
 }
 
 func applyFanStressDefaults(opts *FanStressOptions) {

audit/internal/platform/techdump.go

@@ -20,6 +20,7 @@ var techDumpFixedCommands = []struct {
 	{Name: "dmidecode", Args: []string{"-t", "4"}, File: "dmidecode-type4.txt"},
 	{Name: "dmidecode", Args: []string{"-t", "17"}, File: "dmidecode-type17.txt"},
 	{Name: "lspci", Args: []string{"-vmm", "-D"}, File: "lspci-vmm.txt"},
+	{Name: "lspci", Args: []string{"-vvv"}, File: "lspci-vvv.txt"},
 	{Name: "lsblk", Args: []string{"-J", "-d", "-o", "NAME,TYPE,SIZE,SERIAL,MODEL,TRAN,HCTL"}, File: "lsblk.json"},
 	{Name: "sensors", Args: []string{"-j"}, File: "sensors.json"},
 	{Name: "ipmitool", Args: []string{"fru", "print"}, File: "ipmitool-fru.txt"},

audit/internal/schema/hardware.go

@@ -22,6 +22,10 @@ type RuntimeHealth struct {
 	CUDAReady     bool                   `json:"cuda_ready,omitempty"`
 	NvidiaGSPMode string                 `json:"nvidia_gsp_mode,omitempty"` // "gsp-on", "gsp-off", "gsp-stuck"
 	NetworkStatus string                 `json:"network_status,omitempty"`
+	// ToRAMStatus: "ok" (ISO in RAM), "warning" (toram not active), "failed" (toram active but copy failed)
+	ToRAMStatus   string `json:"toram_status,omitempty"`
+	// USBExportPath: mount point of the first writable USB drive found, empty if none.
+	USBExportPath string `json:"usb_export_path,omitempty"`
 	Issues        []RuntimeIssue         `json:"issues,omitempty"`
 	Tools         []RuntimeToolStatus    `json:"tools,omitempty"`
 	Services      []RuntimeServiceStatus `json:"services,omitempty"`

audit/internal/webui/api.go

@@ -12,6 +12,7 @@ import (
 	"path/filepath"
 	"regexp"
 	"sort"
+	"strconv"
 	"strings"
 	"sync/atomic"
 	"syscall"
@@ -209,6 +210,14 @@ func joinTaskIndices(indices []int) string {
 	return strings.Join(parts, ",")
 }
 
+func formatGPUIndexList(indices []int) string {
+	parts := make([]string, len(indices))
+	for i, idx := range indices {
+		parts[i] = strconv.Itoa(idx)
+	}
+	return strings.Join(parts, ",")
+}
+
 func formatSplitTaskName(baseName, selectionLabel string) string {
 	baseName = strings.TrimSpace(baseName)
 	selectionLabel = strings.TrimSpace(selectionLabel)
@@ -540,6 +549,7 @@ func (h *handler) handleAPIBenchmarkNvidiaRun(w http.ResponseWriter, r *http.Req
 		ExcludeGPUIndices []int  `json:"exclude_gpu_indices"`
 		RunNCCL           *bool  `json:"run_nccl"`
 		ParallelGPUs      *bool  `json:"parallel_gpus"`
+		RampUp            *bool  `json:"ramp_up"`
 		DisplayName       string `json:"display_name"`
 	}
 	if r.Body != nil {
@@ -557,10 +567,63 @@ func (h *handler) handleAPIBenchmarkNvidiaRun(w http.ResponseWriter, r *http.Req
 	if body.ParallelGPUs != nil {
 		parallelGPUs = *body.ParallelGPUs
 	}
+	rampUp := false
+	if body.RampUp != nil {
+		rampUp = *body.RampUp
+	}
 	name := taskDisplayName("nvidia-benchmark", "", "")
 	if strings.TrimSpace(body.DisplayName) != "" {
 		name = body.DisplayName
 	}
+
+	if rampUp && len(body.GPUIndices) > 1 {
+		// Ramp-up mode: resolve GPU list, then create one task per prefix
+		// [gpu0], [gpu0,gpu1], ..., [gpu0,...,gpuN-1], each running in parallel.
+		gpus, err := apiListNvidiaGPUs(h.opts.App)
+		if err != nil {
+			writeError(w, http.StatusBadRequest, err.Error())
+			return
+		}
+		resolved, err := expandSelectedGPUIndices(gpus, body.GPUIndices, body.ExcludeGPUIndices)
+		if err != nil {
+			writeError(w, http.StatusBadRequest, err.Error())
+			return
+		}
+		if len(resolved) < 2 {
+			// Fall through to normal single-task path.
+			rampUp = false
+		} else {
+			now := time.Now()
+			var allTasks []*Task
+			for step := 1; step <= len(resolved); step++ {
+				subset := resolved[:step]
+				stepName := fmt.Sprintf("%s [ramp %d/%d: GPU %s]", name, step, len(resolved), formatGPUIndexList(subset))
+				t := &Task{
+					ID:        newJobID("benchmark-nvidia"),
+					Name:      stepName,
+					Target:    "nvidia-benchmark",
+					Priority:  15,
+					Status:    TaskPending,
+					CreatedAt: now,
+					params: taskParams{
+						GPUIndices:       append([]int(nil), subset...),
+						SizeMB:           body.SizeMB,
+						BenchmarkProfile: body.Profile,
+						RunNCCL:          runNCCL && step == len(resolved),
+						ParallelGPUs:     true,
+						DisplayName:      stepName,
+					},
+				}
+				allTasks = append(allTasks, t)
+			}
+			for _, t := range allTasks {
+				globalQueue.enqueue(t)
+			}
+			writeTaskRunResponse(w, allTasks)
+			return
+		}
+	}
+
 	tasks, err := buildNvidiaTaskSet("nvidia-benchmark", 15, time.Now(), taskParams{
 		GPUIndices:        body.GPUIndices,
 		ExcludeGPUIndices: body.ExcludeGPUIndices,

audit/internal/webui/charts_svg.go

@@ -83,6 +83,10 @@ func renderMetricChartSVG(title string, labels []string, times []time.Time, data
 		}
 	}
 
+	// Downsample to at most ~1400 points (one per pixel) before building SVG.
+	times, datasets = downsampleTimeSeries(times, datasets, 1400)
+	pointCount = len(times)
+
 	statsLabel := chartStatsLabel(datasets)
 
 	legendItems := []metricChartSeries{}
@@ -196,6 +200,19 @@ func drawGPUOverviewChartSVG(title string, labels []string, times []time.Time, s
 		}
 	}
 
+	// Downsample to at most ~1400 points before building SVG.
+	{
+		datasets := make([][]float64, len(series))
+		for i := range series {
+			datasets[i] = series[i].Values
+		}
+		times, datasets = downsampleTimeSeries(times, datasets, 1400)
+		pointCount = len(times)
+		for i := range series {
+			series[i].Values = datasets[i]
+		}
+	}
+
 	scales := make([]chartScale, len(series))
 	for i := range series {
 		min, max := chartSeriesBounds(series[i].Values)
@@ -626,6 +643,87 @@ func writeTimelineBoundaries(b *strings.Builder, layout chartLayout, start, end
 	b.WriteString(`</g>` + "\n")
 }
 
+// downsampleTimeSeries reduces the time series to at most maxPts points using
+// min-max bucketing. Each bucket contributes the index of its min and max value
+// (using the first full-length dataset as the reference series). All parallel
+// datasets are sampled at those same indices so all series stay aligned.
+// If len(times) <= maxPts the inputs are returned unchanged.
+func downsampleTimeSeries(times []time.Time, datasets [][]float64, maxPts int) ([]time.Time, [][]float64) {
+	n := len(times)
+	if n <= maxPts || maxPts <= 0 {
+		return times, datasets
+	}
+	buckets := maxPts / 2
+	if buckets < 1 {
+		buckets = 1
+	}
+	// Use the first dataset that has the same length as times as the reference
+	// for deciding which two indices to keep per bucket.
+	var ref []float64
+	for _, ds := range datasets {
+		if len(ds) == n {
+			ref = ds
+			break
+		}
+	}
+	selected := make([]int, 0, maxPts)
+	bucketSize := float64(n) / float64(buckets)
+	for b := 0; b < buckets; b++ {
+		lo := int(math.Round(float64(b) * bucketSize))
+		hi := int(math.Round(float64(b+1) * bucketSize))
+		if hi > n {
+			hi = n
+		}
+		if lo >= hi {
+			continue
+		}
+		if ref == nil {
+			selected = append(selected, lo)
+			if hi-1 != lo {
+				selected = append(selected, hi-1)
+			}
+			continue
+		}
+		minIdx, maxIdx := lo, lo
+		for i := lo + 1; i < hi; i++ {
+			if ref[i] < ref[minIdx] {
+				minIdx = i
+			}
+			if ref[i] > ref[maxIdx] {
+				maxIdx = i
+			}
+		}
+		if minIdx <= maxIdx {
+			selected = append(selected, minIdx)
+			if maxIdx != minIdx {
+				selected = append(selected, maxIdx)
+			}
+		} else {
+			selected = append(selected, maxIdx)
+			if minIdx != maxIdx {
+				selected = append(selected, minIdx)
+			}
+		}
+	}
+	outTimes := make([]time.Time, len(selected))
+	for i, idx := range selected {
+		outTimes[i] = times[idx]
+	}
+	outDatasets := make([][]float64, len(datasets))
+	for d, ds := range datasets {
+		if len(ds) != n {
+			outDatasets[d] = ds
+			continue
+		}
+		out := make([]float64, len(selected))
+		for i, idx := range selected {
+			out[i] = ds[idx]
+		}
+		outDatasets[d] = out
+	}
+	return outTimes, outDatasets
+}
+
 func chartXForTime(ts, start, end time.Time, left, right int) float64 {
 	if !end.After(start) {
 		return float64(left+right) / 2

audit/internal/webui/pages.go

@@ -349,6 +349,9 @@ func renderHardwareSummaryCard(opts HandlerOptions) string {
 	writeRow("GPU", hwDescribeGPU(hw), runtimeStatusBadge(gpuRow.Status))
 
 	psuRow := aggregateComponentStatus("PSU", records, nil, []string{"psu:"})
+	if psuRow.Status == "UNKNOWN" && len(hw.PowerSupplies) > 0 {
+		psuRow.Status = hwPSUStatus(hw.PowerSupplies)
+	}
 	writeRow("PSU", hwDescribePSU(hw), runtimeStatusBadge(psuRow.Status))
 
 	if nicDesc := hwDescribeNIC(hw); nicDesc != "" {
@@ -506,6 +509,31 @@ func hwDescribeGPU(hw schema.HardwareSnapshot) string {
 	return strings.Join(parts, ", ")
 }
 
+// hwPSUStatus returns "OK", "CRITICAL", "WARNING", or "UNKNOWN" based on
+// PSU statuses from the audit snapshot. Used as fallback when component-status.json
+// has no psu: records yet (e.g. first boot before audit writes them).
+func hwPSUStatus(psus []schema.HardwarePowerSupply) string {
+	worst := "UNKNOWN"
+	for _, psu := range psus {
+		if psu.Status == nil {
+			continue
+		}
+		switch strings.ToUpper(strings.TrimSpace(*psu.Status)) {
+		case "CRITICAL":
+			return "CRITICAL"
+		case "WARNING":
+			if worst != "CRITICAL" {
+				worst = "WARNING"
+			}
+		case "OK":
+			if worst == "UNKNOWN" {
+				worst = "OK"
+			}
+		}
+	}
+	return worst
+}
+
 // hwDescribePSU returns a summary like "2× 1600 W" or "2× PSU".
 func hwDescribePSU(hw schema.HardwareSnapshot) string {
 	n := len(hw.PowerSupplies)
@@ -646,6 +674,8 @@ func renderHealthCard(opts HandlerOptions) string {
 		buildRuntimeAccelerationRow(health),
 		buildRuntimeToolsRow(health),
 		buildRuntimeServicesRow(health),
+		buildRuntimeUSBExportRow(health),
+		buildRuntimeToRAMRow(health),
 	}
 	b.WriteString(`<table><thead><tr><th>Check</th><th>Status</th><th>Source</th><th>Issue</th></tr></thead><tbody>`)
 	for _, row := range rows {
@@ -742,7 +772,13 @@ func buildRuntimeServicesRow(health schema.RuntimeHealth) runtimeHealthRow {
 	nonActive := make([]string, 0)
 	for _, svc := range health.Services {
 		state := strings.TrimSpace(strings.ToLower(svc.Status))
-		if state != "active" {
+		// "activating" and "deactivating" are transient states for oneshot services
+		// (RemainAfterExit=yes) — the service is running normally, not failed.
+		// Only "failed" and "inactive" (after services should be running) are problems.
+		switch state {
+		case "active", "activating", "deactivating", "reloading":
+			// OK — service is running or transitioning normally
+		default:
 			nonActive = append(nonActive, svc.Name+"="+svc.Status)
 		}
 	}
@@ -755,6 +791,51 @@ func buildRuntimeServicesRow(health schema.RuntimeHealth) runtimeHealthRow {
 	return runtimeHealthRow{Title: "Bee Services", Status: status, Source: "ServiceState", Issue: issue}
 }
 
+func buildRuntimeUSBExportRow(health schema.RuntimeHealth) runtimeHealthRow {
+	path := strings.TrimSpace(health.USBExportPath)
+	if path != "" {
+		return runtimeHealthRow{
+			Title:  "USB Export Drive",
+			Status: "OK",
+			Source: "/proc/mounts + lsblk",
+			Issue:  path,
+		}
+	}
+	return runtimeHealthRow{
+		Title:  "USB Export Drive",
+		Status: "WARNING",
+		Source: "/proc/mounts + lsblk",
+		Issue:  "No writable USB drive mounted. Plug in a USB drive to enable log export.",
+	}
+}
+
+func buildRuntimeToRAMRow(health schema.RuntimeHealth) runtimeHealthRow {
+	switch strings.ToLower(strings.TrimSpace(health.ToRAMStatus)) {
+	case "ok":
+		return runtimeHealthRow{
+			Title:  "LiveCD in RAM",
+			Status: "OK",
+			Source: "live-boot / /proc/mounts",
+			Issue:  "",
+		}
+	case "failed":
+		return runtimeHealthRow{
+			Title:  "LiveCD in RAM",
+			Status: "FAILED",
+			Source: "live-boot / /proc/mounts",
+			Issue:  "toram boot parameter set but ISO is not mounted from RAM. Copy may have failed.",
+		}
+	default:
+		// toram not active — ISO still on original boot media (USB/CD)
+		return runtimeHealthRow{
+			Title:  "LiveCD in RAM",
+			Status: "WARNING",
+			Source: "live-boot / /proc/mounts",
+			Issue:  "ISO not copied to RAM. Use \u201cCopy to RAM\u201d to free the boot drive and improve performance.",
+		}
+	}
+}
+
 func buildHardwareComponentRows(exportDir string) []runtimeHealthRow {
 	path := filepath.Join(exportDir, "component-status.json")
 	db, err := app.OpenComponentStatusDB(path)
@@ -1261,11 +1342,11 @@ func renderValidate(opts HandlerOptions) string {
 
 <div class="grid3">
 ` + renderSATCard("nvidia", "NVIDIA GPU", "runNvidiaValidateSet('nvidia')", "", renderValidateCardBody(
-			inv.NVIDIA,
+		inv.NVIDIA,
-			`Runs NVIDIA diagnostics and board inventory checks.`,
+		`Runs NVIDIA diagnostics and board inventory checks.`,
-			`<code>nvidia-smi</code>, <code>dmidecode</code>, <code>dcgmi diag</code>`,
+		`<code>nvidia-smi</code>, <code>dmidecode</code>, <code>dcgmi diag</code>`,
-			`Level 2 in Validate, Level 3 in Stress. Runs one GPU at a time on the selected NVIDIA GPUs.`,
+		`Level 2 in Validate, Level 3 in Stress. Runs one GPU at a time on the selected NVIDIA GPUs.`,
-		)) +
+	)) +
 		`<div id="sat-card-nvidia-targeted-stress">` +
 		renderSATCard("nvidia-targeted-stress", "NVIDIA GPU Targeted Stress", "runNvidiaValidateSet('nvidia-targeted-stress')", "", renderValidateCardBody(
 			inv.NVIDIA,
@@ -1777,6 +1858,11 @@ func formatValidateDeviceSummary(total int, models map[string]int, unit string)
 	if total != 1 {
 		label += "s"
 	}
+	// If there is only one model the leading count duplicates the per-model
+	// count already in parts (e.g. "4 GPU: 4 x RTX …" → "4 x RTX …").
+	if len(parts) == 1 {
+		return parts[0] + " " + label
+	}
 	return fmt.Sprintf("%d %s: %s", total, label, strings.Join(parts, ", "))
 }
 
@@ -1880,9 +1966,13 @@ func renderBenchmark(opts HandlerOptions) string {
           <p style="color:var(--muted);font-size:13px">Loading NVIDIA GPUs...</p>
         </div>
       </div>
+      <label class="benchmark-cb-row">
+        <input type="checkbox" id="benchmark-ramp-up" checked onchange="benchmarkUpdateSelectionNote()">
+        <span>Ramp-up mode: run 1 GPU, then 2, then 3… up to all selected GPUs (each step is a separate task)</span>
+      </label>
       <label class="benchmark-cb-row">
         <input type="checkbox" id="benchmark-parallel-gpus">
-        <span>Run all selected GPUs simultaneously (parallel mode)</span>
+        <span>Run all selected GPUs simultaneously (parallel mode, ignored in ramp-up)</span>
       </label>
       <label class="benchmark-cb-row">
         <input type="checkbox" id="benchmark-run-nccl" checked>
@@ -1950,11 +2040,16 @@ function benchmarkUpdateSelectionNote() {
     return;
   }
   btn.disabled = false;
-  note.textContent = 'Selected GPUs: ' + selected.join(', ') + '.';
+  const rampUp = selected.length > 1 && !!document.getElementById('benchmark-ramp-up').checked;
-  if (nccl && nccl.checked && selected.length < 2) {
+  if (rampUp) {
-    note.textContent += ' NCCL will be skipped because fewer than 2 GPUs are selected.';
+    note.textContent = 'Ramp-up: will spawn ' + selected.length + ' tasks (1 GPU → ' + selected.length + ' GPUs). NCCL runs on the final step only.';
-  } else if (nccl && nccl.checked) {
+  } else {
-    note.textContent += ' NCCL interconnect will use only these GPUs.';
+    note.textContent = 'Selected GPUs: ' + selected.join(', ') + '.';
+    if (nccl && nccl.checked && selected.length < 2) {
+      note.textContent += ' NCCL will be skipped because fewer than 2 GPUs are selected.';
+    } else if (nccl && nccl.checked) {
+      note.textContent += ' NCCL interconnect will use only these GPUs.';
+    }
   }
 }
 
@@ -2009,12 +2104,14 @@ function runNvidiaBenchmark() {
     return;
   }
   if (benchmarkES) { benchmarkES.close(); benchmarkES = null; }
-  const parallelGPUs = !!document.getElementById('benchmark-parallel-gpus').checked;
+  const rampUp = selected.length > 1 && !!document.getElementById('benchmark-ramp-up').checked;
+  const parallelGPUs = !rampUp && !!document.getElementById('benchmark-parallel-gpus').checked;
   const body = {
     profile: document.getElementById('benchmark-profile').value || 'standard',
     gpu_indices: selected,
     run_nccl: !!document.getElementById('benchmark-run-nccl').checked,
     parallel_gpus: parallelGPUs,
+    ramp_up: rampUp,
     display_name: 'NVIDIA Benchmark'
   };
   document.getElementById('benchmark-output').style.display = 'block';
@@ -2287,7 +2384,7 @@ func renderBurn() string {
 	    <p id="burn-selection-note" style="font-size:12px;color:var(--muted);margin:10px 0 0">Select at least one NVIDIA GPU to enable NVIDIA burn recipes.</p>
 	    <label class="cb-row" style="margin-top:10px">
 	      <input type="checkbox" id="burn-stagger-nvidia">
-	      <span>Ramp selected NVIDIA GPUs one by one before full-load hold. Uses a 3-minute stabilization window per GPU, then keeps all selected GPUs under load for the chosen Burn Profile duration.</span>
+	      <span>Ramp selected NVIDIA GPUs one by one before the full-load hold. Smoke: +2 min per GPU, then 5 min with all selected GPUs under load. Acceptance: +10 min per GPU, then at least 1 hour with all selected GPUs under load. Overnight: +1 hour per GPU, then at least 1 hour with all selected GPUs under load, capped at 10 hours total.</span>
 	    </label>
 	  </div>
 	</div>
@@ -3022,7 +3119,6 @@ usbRefresh();
 </script>`
 }
 
-
 func renderNvidiaSelfHealInline() string {
 	return `<p style="font-size:13px;color:var(--muted);margin-bottom:12px">Inspect NVIDIA GPU health, restart the bee-nvidia driver service, and issue a per-GPU reset when the driver reports reset required.</p>
 <div style="display:flex;gap:8px;flex-wrap:wrap;margin-bottom:12px">

audit/internal/webui/tasks.go

@@ -152,6 +152,12 @@ type burnPreset struct {
 	DurationSec int
 }
 
+type nvidiaRampSpec struct {
+	DurationSec      int
+	StaggerSeconds   int
+	TotalDurationSec int
+}
+
 func resolveBurnPreset(profile string) burnPreset {
 	switch profile {
 	case "overnight":
@@ -163,11 +169,43 @@ func resolveBurnPreset(profile string) burnPreset {
 	}
 }
 
-func boolToNvidiaStaggerSeconds(enabled bool, selected []int) int {
+func resolveNvidiaRampPlan(profile string, enabled bool, selected []int) (nvidiaRampSpec, error) {
-	if enabled && len(selected) > 1 {
+	base := resolveBurnPreset(profile).DurationSec
-		return 180
+	plan := nvidiaRampSpec{
+		DurationSec:      base,
+		TotalDurationSec: base,
 	}
-	return 0
+	if !enabled {
+		return plan, nil
+	}
+	count := len(selected)
+	if count == 0 {
+		return nvidiaRampSpec{}, fmt.Errorf("staggered NVIDIA burn requires explicit GPU selection")
+	}
+	if count == 1 {
+		return plan, nil
+	}
+
+	switch profile {
+	case "acceptance":
+		plan.StaggerSeconds = 10 * 60
+		plan.TotalDurationSec = plan.DurationSec + plan.StaggerSeconds*(count-1)
+	case "overnight":
+		plan.StaggerSeconds = 60 * 60
+		plan.TotalDurationSec = 8 * 60 * 60
+		minTotal := count * 60 * 60
+		if plan.TotalDurationSec < minTotal {
+			plan.TotalDurationSec = minTotal
+		}
+		if plan.TotalDurationSec > 10*60*60 {
+			return nvidiaRampSpec{}, fmt.Errorf("overnight staggered NVIDIA burn supports at most 10 GPUs")
+		}
+		plan.DurationSec = plan.TotalDurationSec - plan.StaggerSeconds*(count-1)
+	default:
+		plan.StaggerSeconds = 2 * 60
+		plan.TotalDurationSec = plan.DurationSec + plan.StaggerSeconds*(count-1)
+	}
+	return plan, nil
 }
 
 func resolvePlatformStressPreset(profile string) platform.PlatformStressOptions {
@@ -600,7 +638,7 @@ func (q *taskQueue) runTask(t *Task, j *jobState, ctx context.Context) {
 			RunNCCL:           t.params.RunNCCL,
 			ParallelGPUs:      t.params.ParallelGPUs,
 		}, j.append)
-		case "nvidia-compute":
+	case "nvidia-compute":
 		if a == nil {
 			err = fmt.Errorf("app not configured")
 			break
@@ -609,11 +647,18 @@ func (q *taskQueue) runTask(t *Task, j *jobState, ctx context.Context) {
 		if t.params.BurnProfile != "" && dur <= 0 {
 			dur = resolveBurnPreset(t.params.BurnProfile).DurationSec
 		}
-			staggerSec := boolToNvidiaStaggerSeconds(t.params.StaggerGPUStart, t.params.GPUIndices)
+		rampPlan, planErr := resolveNvidiaRampPlan(t.params.BurnProfile, t.params.StaggerGPUStart, t.params.GPUIndices)
-			if staggerSec > 0 {
+		if planErr != nil {
-				j.append(fmt.Sprintf("NVIDIA staggered ramp-up enabled: %ds per GPU", staggerSec))
+			err = planErr
-			}
+			break
-			archive, err = a.RunNvidiaOfficialComputePack(ctx, "", dur, t.params.GPUIndices, staggerSec, j.append)
+		}
+		if t.params.BurnProfile != "" && t.params.StaggerGPUStart && dur <= 0 {
+			dur = rampPlan.DurationSec
+		}
+		if rampPlan.StaggerSeconds > 0 {
+			j.append(fmt.Sprintf("NVIDIA staggered ramp-up enabled: %ds per GPU; post-ramp hold: %ds; total runtime: %ds", rampPlan.StaggerSeconds, dur, rampPlan.TotalDurationSec))
+		}
+		archive, err = a.RunNvidiaOfficialComputePack(ctx, "", dur, t.params.GPUIndices, rampPlan.StaggerSeconds, j.append)
 	case "nvidia-targeted-power":
 		if a == nil {
 			err = fmt.Errorf("app not configured")
@@ -663,13 +708,24 @@ func (q *taskQueue) runTask(t *Task, j *jobState, ctx context.Context) {
 		if t.params.BurnProfile != "" && dur <= 0 {
 			dur = resolveBurnPreset(t.params.BurnProfile).DurationSec
 		}
-			archive, err = runNvidiaStressPackCtx(a, ctx, "", platform.NvidiaStressOptions{
+		rampPlan, planErr := resolveNvidiaRampPlan(t.params.BurnProfile, t.params.StaggerGPUStart, t.params.GPUIndices)
-				DurationSec:       dur,
+		if planErr != nil {
-				Loader:            t.params.Loader,
+			err = planErr
-				GPUIndices:        t.params.GPUIndices,
+			break
-				ExcludeGPUIndices: t.params.ExcludeGPUIndices,
+		}
-				StaggerSeconds:    boolToNvidiaStaggerSeconds(t.params.StaggerGPUStart, t.params.GPUIndices),
+		if t.params.BurnProfile != "" && t.params.StaggerGPUStart && dur <= 0 {
-			}, j.append)
+			dur = rampPlan.DurationSec
+		}
+		if rampPlan.StaggerSeconds > 0 {
+			j.append(fmt.Sprintf("NVIDIA staggered ramp-up enabled: %ds per GPU; post-ramp hold: %ds; total runtime: %ds", rampPlan.StaggerSeconds, dur, rampPlan.TotalDurationSec))
+		}
+		archive, err = runNvidiaStressPackCtx(a, ctx, "", platform.NvidiaStressOptions{
+			DurationSec:       dur,
+			Loader:            t.params.Loader,
+			GPUIndices:        t.params.GPUIndices,
+			ExcludeGPUIndices: t.params.ExcludeGPUIndices,
+			StaggerSeconds:    rampPlan.StaggerSeconds,
+		}, j.append)
 	case "memory":
 		if a == nil {
 			err = fmt.Errorf("app not configured")

audit/internal/webui/tasks_test.go

@@ -491,6 +491,83 @@ func TestResolveBurnPreset(t *testing.T) {
 	}
 }
 
+func TestResolveNvidiaRampPlan(t *testing.T) {
+	tests := []struct {
+		name     string
+		profile  string
+		enabled  bool
+		selected []int
+		want     nvidiaRampSpec
+		wantErr  string
+	}{
+		{
+			name:     "disabled uses base preset",
+			profile:  "acceptance",
+			selected: []int{0, 1},
+			want:     nvidiaRampSpec{DurationSec: 60 * 60, TotalDurationSec: 60 * 60},
+		},
+		{
+			name:     "smoke ramp uses two minute steps",
+			profile:  "smoke",
+			enabled:  true,
+			selected: []int{0, 1, 2},
+			want:     nvidiaRampSpec{DurationSec: 5 * 60, StaggerSeconds: 2 * 60, TotalDurationSec: 9 * 60},
+		},
+		{
+			name:     "acceptance ramp uses ten minute steps",
+			profile:  "acceptance",
+			enabled:  true,
+			selected: []int{0, 1, 2},
+			want:     nvidiaRampSpec{DurationSec: 60 * 60, StaggerSeconds: 10 * 60, TotalDurationSec: 80 * 60},
+		},
+		{
+			name:     "overnight stays at eight hours when possible",
+			profile:  "overnight",
+			enabled:  true,
+			selected: []int{0, 1, 2},
+			want:     nvidiaRampSpec{DurationSec: 6 * 60 * 60, StaggerSeconds: 60 * 60, TotalDurationSec: 8 * 60 * 60},
+		},
+		{
+			name:     "overnight extends to keep one hour after final gpu",
+			profile:  "overnight",
+			enabled:  true,
+			selected: []int{0, 1, 2, 3, 4, 5, 6, 7, 8},
+			want:     nvidiaRampSpec{DurationSec: 60 * 60, StaggerSeconds: 60 * 60, TotalDurationSec: 9 * 60 * 60},
+		},
+		{
+			name:     "overnight rejects impossible gpu count",
+			profile:  "overnight",
+			enabled:  true,
+			selected: []int{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
+			wantErr:  "at most 10 GPUs",
+		},
+		{
+			name:    "enabled requires explicit selection",
+			profile: "smoke",
+			enabled: true,
+			wantErr: "requires explicit GPU selection",
+		},
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.name, func(t *testing.T) {
+			got, err := resolveNvidiaRampPlan(tc.profile, tc.enabled, tc.selected)
+			if tc.wantErr != "" {
+				if err == nil || !strings.Contains(err.Error(), tc.wantErr) {
+					t.Fatalf("err=%v want substring %q", err, tc.wantErr)
+				}
+				return
+			}
+			if err != nil {
+				t.Fatalf("resolveNvidiaRampPlan error: %v", err)
+			}
+			if got != tc.want {
+				t.Fatalf("resolveNvidiaRampPlan(%q, %t, %v)=%+v want %+v", tc.profile, tc.enabled, tc.selected, got, tc.want)
+			}
+		})
+	}
+}
+
 func TestTaskDisplayNameUsesNvidiaStressLoader(t *testing.T) {
 	tests := []struct {
 		loader string

bible-local/docs/gpu-model-propagation.md

@@ -0,0 +1,117 @@
+# GPU Model Name Propagation
+
+How GPU model names are detected, stored, and displayed throughout the project.
+
+---
+
+## Detection Sources
+
+There are **two separate pipelines** for GPU model names — they use different structs and don't share state.
+
+### Pipeline A — Live / SAT (nvidia-smi query at runtime)
+
+**File:** `audit/internal/platform/sat.go`
+
+- `ListNvidiaGPUs()` → `NvidiaGPU.Name` (field: `name`, from `nvidia-smi --query-gpu=index,name,...`)
+- `ListNvidiaGPUStatuses()` → `NvidiaGPUStatus.Name`
+- Used by: GPU selection UI, live metrics labels, burn/stress test logic
+
+### Pipeline B — Benchmark results
+
+**File:** `audit/internal/platform/benchmark.go`, line 124
+
+- `queryBenchmarkGPUInfo(selected)` → `benchmarkGPUInfo.Name`
+- Stored in `BenchmarkGPUResult.Name` (`json:"name,omitempty"`)
+- Used by: benchmark history table, benchmark report
+
+### Pipeline C — Hardware audit JSON (PCIe schema)
+
+**File:** `audit/internal/schema/hardware.go`
+
+- `HardwarePCIeDevice.Model *string` (field name is **Model**, not Name)
+- For AMD GPUs: populated by `audit/internal/collector/amdgpu.go` from `info.Product`
+- For NVIDIA GPUs: **NOT populated** by `audit/internal/collector/nvidia.go` — the NVIDIA enricher sets telemetry/status but skips the Model field
+- Used by: hardware summary page (`hwDescribeGPU` in `pages.go:487`)
+
+---
+
+## Key Inconsistency: NVIDIA PCIe Model is Never Set
+
+`audit/internal/collector/nvidia.go` — `enrichPCIeWithNVIDIAData()` enriches NVIDIA PCIe devices with telemetry and status but does **not** populate `HardwarePCIeDevice.Model`.
+
+This means:
+- Hardware summary page shows "Unknown GPU" for all NVIDIA devices (falls back at `pages.go:486`)
+- AMD GPUs do have their model populated
+
+The fix would be: copy `gpu.Name` from the SAT pipeline into `dev.Model` inside `enrichPCIeWithNVIDIAData`.
+
+---
+
+## Benchmark History "Unknown GPU" Issue
+
+**Symptom:** Benchmark history table shows "GPU #N — Unknown GPU" columns instead of real GPU model names.
+
+**Root cause:** `BenchmarkGPUResult.Name` has tag `json:"name,omitempty"`. If `queryBenchmarkGPUInfo()` fails (warns at `benchmark.go:126`) or returns empty names, the Name field is never set and is omitted from JSON. Loaded results have empty Name → falls back to "Unknown GPU" at `pages.go:2226, 2237`.
+
+This happens for:
+- Older result files saved before the `Name` field was added
+- Runs where nvidia-smi query failed before the benchmark started
+
+---
+
+## Fallback Strings — Current State
+
+| Location | File | Fallback string |
+|---|---|---|
+| Hardware summary (PCIe) | `pages.go:486` | `"Unknown GPU"` |
+| Benchmark report summary | `benchmark_report.go:43` | `"Unknown GPU"` |
+| Benchmark report scorecard | `benchmark_report.go:93` | `"Unknown"` ← inconsistent |
+| Benchmark report detail | `benchmark_report.go:122` | `"Unknown GPU"` |
+| Benchmark history per-GPU col | `pages.go:2226` | `"Unknown GPU"` |
+| Benchmark history parallel col | `pages.go:2237` | `"Unknown GPU"` |
+| SAT status file write | `sat.go:922` | `"unknown"` ← lowercase, inconsistent |
+| GPU selection API | `api.go:163` | `"GPU N"` (no "Unknown") |
+
+**Rule:** all UI fallbacks should use `"Unknown GPU"`. The two outliers are `benchmark_report.go:93` (`"Unknown"`) and `sat.go:922` (`"unknown"`).
+
+---
+
+## GPU Selection UI
+
+**File:** `audit/internal/webui/pages.go`
+
+- Source: `GET /api/gpus` → `api.go` → `ListNvidiaGPUs()` → live nvidia-smi
+- Render: `'GPU ' + gpu.index + ' — ' + gpu.name + ' · ' + mem`
+- Fallback: `gpu.name || 'GPU ' + idx` (JS, line ~1432)
+
+This always shows the correct model because it queries nvidia-smi live. It is **not** connected to benchmark result data.
+
+---
+
+## Data Flow Summary
+
+```
+nvidia-smi (live)
+  └─ ListNvidiaGPUs() → NvidiaGPU.Name
+       ├─ GPU selection UI (always correct)
+       ├─ Live metrics labels (charts_svg.go)
+       └─ SAT/burn status file (sat.go)
+
+nvidia-smi (at benchmark start)
+  └─ queryBenchmarkGPUInfo() → benchmarkGPUInfo.Name
+       └─ BenchmarkGPUResult.Name (json:"name,omitempty")
+            ├─ Benchmark report
+            └─ Benchmark history table columns
+
+nvidia-smi / lspci (audit collection)
+  └─ HardwarePCIeDevice.Model (NVIDIA: NOT populated; AMD: populated)
+       └─ Hardware summary page hwDescribeGPU()
+```
+
+---
+
+## What Needs Fixing
+
+1. **NVIDIA PCIe Model** — `enrichPCIeWithNVIDIAData()` should set `dev.Model = &gpu.Name`
+2. **Fallback consistency** — `benchmark_report.go:93` should say `"Unknown GPU"` not `"Unknown"`; `sat.go:922` should say `"Unknown GPU"` not `"unknown"`
+3. **Old benchmark JSONs** — no fix possible for already-saved results with missing names (display-only issue)

iso/builder/config/bootloaders/grub-pc/grub.cfg

@@ -11,18 +11,18 @@ echo "  Hardware Audit LiveCD"
 echo ""
 
 menuentry "EASY-BEE" {
-    linux   @KERNEL_LIVE@ @APPEND_LIVE@ nomodeset bee.nvidia.mode=normal net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable nowatchdog nosoftlockup
+    linux   @KERNEL_LIVE@ @APPEND_LIVE@ nomodeset bee.nvidia.mode=normal net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1 nowatchdog nosoftlockup
     initrd  @INITRD_LIVE@
 }
 
 submenu "EASY-BEE (advanced options) -->" {
     menuentry "EASY-BEE — GSP=off" {
-        linux   @KERNEL_LIVE@ @APPEND_LIVE@ nomodeset bee.nvidia.mode=gsp-off net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable nowatchdog nosoftlockup
+        linux   @KERNEL_LIVE@ @APPEND_LIVE@ nomodeset bee.nvidia.mode=gsp-off net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1 nowatchdog nosoftlockup
         initrd  @INITRD_LIVE@
     }
 
     menuentry "EASY-BEE — KMS (no nomodeset)" {
-        linux   @KERNEL_LIVE@ @APPEND_LIVE@ bee.nvidia.mode=normal net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable nowatchdog nosoftlockup
+        linux   @KERNEL_LIVE@ @APPEND_LIVE@ bee.nvidia.mode=normal net.ifnames=0 biosdevname=0 mitigations=off transparent_hugepage=always numa_balancing=disable pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1 nowatchdog nosoftlockup
         initrd  @INITRD_LIVE@
     }
 

iso/builder/config/bootloaders/isolinux/live.cfg.in

@@ -3,31 +3,31 @@ label live-@FLAVOUR@-normal
     menu default
     linux @LINUX@
     initrd @INITRD@
-    append @APPEND_LIVE@ bee.nvidia.mode=normal
+    append @APPEND_LIVE@ bee.nvidia.mode=normal pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1
 
 label live-@FLAVOUR@-kms
     menu label EASY-BEE (^graphics/KMS)
     linux @LINUX@
     initrd @INITRD@
-    append @APPEND_LIVE@ bee.display=kms bee.nvidia.mode=normal
+    append @APPEND_LIVE@ bee.display=kms bee.nvidia.mode=normal pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1
 
 label live-@FLAVOUR@-toram
     menu label EASY-BEE (^load to RAM)
     linux @LINUX@
     initrd @INITRD@
-    append @APPEND_LIVE@ toram bee.nvidia.mode=normal
+    append @APPEND_LIVE@ toram bee.nvidia.mode=normal pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1
 
 label live-@FLAVOUR@-gsp-off
     menu label EASY-BEE (^NVIDIA GSP=off)
     linux @LINUX@
     initrd @INITRD@
-    append @APPEND_LIVE@ nomodeset bee.nvidia.mode=gsp-off
+    append @APPEND_LIVE@ nomodeset bee.nvidia.mode=gsp-off pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1
 
 label live-@FLAVOUR@-kms-gsp-off
     menu label EASY-BEE (g^raphics/KMS, GSP=off)
     linux @LINUX@
     initrd @INITRD@
-    append @APPEND_LIVE@ bee.display=kms bee.nvidia.mode=gsp-off
+    append @APPEND_LIVE@ bee.display=kms bee.nvidia.mode=gsp-off pcie_aspm=off intel_idle.max_cstate=1 processor.max_cstate=1
 
 label live-@FLAVOUR@-failsafe
     menu label EASY-BEE (^fail-safe)

iso/builder/config/hooks/normal/9000-bee-setup.hook.chroot

@@ -25,6 +25,7 @@ ensure_bee_console_user() {
 ensure_bee_console_user
 
 # Enable common bee services
+systemctl enable bee-hpc-tuning.service
 systemctl enable bee-network.service
 systemctl enable bee-preflight.service
 systemctl enable bee-audit.service
@@ -55,6 +56,7 @@ fi
 # nogpu: no GPU services needed
 
 # Ensure scripts are executable
+chmod +x /usr/local/bin/bee-hpc-tuning  2>/dev/null || true
 chmod +x /usr/local/bin/bee-network.sh  2>/dev/null || true
 chmod +x /usr/local/bin/bee-sshsetup   2>/dev/null || true
 chmod +x /usr/local/bin/bee-smoketest  2>/dev/null || true

iso/overlay/etc/systemd/system/bee-hpc-tuning.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Bee: HPC tuning (CPU governor, C-states)
+After=local-fs.target
+Before=bee-nvidia.service bee-audit.service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/bee-log-run /appdata/bee/export/bee-hpc-tuning.log /usr/local/bin/bee-hpc-tuning
+StandardOutput=journal
+StandardError=journal
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target

iso/overlay/usr/local/bin/bee-hpc-tuning

@@ -0,0 +1,41 @@
+#!/bin/sh
+# bee-hpc-tuning — apply HPC tuning for deterministic benchmarking
+# Called by bee-hpc-tuning.service at boot.
+
+log() { echo "[bee-hpc-tuning] $*"; }
+
+# ── CPU governor ────────────────────────────────────────────────────────────
+# Set all CPU cores to performance governor via sysfs.
+# cpupower is not available; write directly to scaling_governor.
+governor_ok=0
+governor_fail=0
+for gov_path in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
+    [ -f "$gov_path" ] || continue
+    if echo performance > "$gov_path" 2>/dev/null; then
+        governor_ok=$((governor_ok + 1))
+    else
+        governor_fail=$((governor_fail + 1))
+    fi
+done
+
+if [ "$governor_ok" -gt 0 ] && [ "$governor_fail" -eq 0 ]; then
+    log "CPU governor set to performance on ${governor_ok} core(s)"
+elif [ "$governor_ok" -gt 0 ]; then
+    log "WARN: CPU governor: ${governor_ok} OK, ${governor_fail} failed"
+elif [ "$governor_fail" -gt 0 ]; then
+    log "WARN: failed to set CPU governor on ${governor_fail} core(s)"
+else
+    log "WARN: no cpufreq scaling_governor paths found (C-state governor or HW-controlled)"
+fi
+
+# ── Transparent Huge Pages ───────────────────────────────────────────────────
+# Kernel cmdline sets transparent_hugepage=always at boot, but confirm and log.
+thp_path=/sys/kernel/mm/transparent_hugepage/enabled
+if [ -f "$thp_path" ]; then
+    current=$(cat "$thp_path" 2>/dev/null)
+    log "transparent_hugepage: ${current}"
+else
+    log "WARN: transparent_hugepage sysfs path not found"
+fi
+
+log "done"