Installs a local-premount initramfs hook that intercepts bee.wipe=all before
squashfs is mounted. Shows a numbered disk selection TUI (pure POSIX sh), wipes
selected disks (nvme format / blkdiscard / dd fallback), syncs, and reboots.
Works even when squashfs fails to mount.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a "WIPE ALL DISKS" entry to both GRUB and isolinux menus (bee.wipe=all).
Includes bee-wipe-disks for manual use from a running live system.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dcgmproftester and other GPU test subprocesses run inside the bee-web
cgroup and exceed 3G with 8 GPUs. OOM killer terminates the whole
service. No memory cap is appropriate on a LiveCD where GPU tests
legitimately use several GB.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- grub.cfg: add "load to RAM (toram)" entry to advanced submenu
- install_to_ram.go: resume from existing /dev/shm/bee-live copy if
source medium is unavailable after bee-web restart
- tasks.go: fix "Recovered after bee-web restart" shown on every run
(check j.lines before first append, not after)
- bee-install: retry unsquashfs up to 5x with wait-for-remount on
source loss; clear error message with bee-remount-medium hint
- bee-remount-medium: new script to find and remount live ISO source
after USB/CD reconnect; supports --wait polling mode
- 9000-bee-setup: chmod +x for bee-install and bee-remount-medium
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
400×400px PNG centered via feh --bg-center --image-bg '#000000'.
Fallback solid fill also changed to black.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- grub.cfg + isolinux/live.cfg.in: add pcie_aspm=off,
intel_idle.max_cstate=1 and processor.max_cstate=1 to all
non-failsafe boot entries
- bee-hpc-tuning: new script that sets all CPU cores to performance
governor via sysfs and logs THP state at boot
- bee-hpc-tuning.service: runs before bee-nvidia and bee-audit
- 9000-bee-setup.hook.chroot: enable service and mark script executable
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HPL 2.3 from netlib compiled against OpenBLAS with a minimal
single-process MPI stub — no MPI package required in the ISO.
Matrix size is auto-sized to 80% of total RAM at runtime.
Build:
- VERSIONS: HPL_VERSION=2.3, HPL_SHA256=32c5c17d…
- build-hpl.sh: downloads HPL + OpenBLAS from Debian 12 repo,
compiles xhpl with a self-contained mpi_stub.c
- build.sh: step 80-hpl, injects xhpl + libopenblas into overlay
Runtime:
- bee-hpl: generates HPL.dat (N auto from /proc/meminfo, NB=256,
P=1 Q=1), runs xhpl, prints standard WR... Gflops output
- platform/hpl.go: RunHPL(), parses WR line → GFlops + PASSED/FAILED
- tasks.go: target "hpl"
- pages.go: LINPACK (HPL) card in validate/stress grid (stress-only)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-nvidia-load: run insmod in background, poll /proc/devices for
nvidiactl; if GSP init doesn't complete in 90s, kill insmod and retry
with NVreg_EnableGpuFirmware=0. Handles EBUSY case with clear error.
- Write /run/bee-nvidia-mode (gsp-on/gsp-off/gsp-stuck) for audit layer
- Show GSP mode badge in sidebar: yellow for gsp-off, red for gsp-stuck
- Report NvidiaGSPMode in RuntimeHealth with issue entries
- Simplify GRUB menu: default (KMS+GSP), advanced submenu (GSP=off,
nomodeset, fail-safe), remove load-to-RAM entry
- Add pcmanfm, ristretto, mupdf, mousepad to desktop packages
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add feh and python3-pil to package list
- Add chroot hook that generates /usr/share/bee/wallpaper.png using PIL:
black background, EASY-BEE box-drawing logo in amber (#f6c90e),
"Hardware Audit LiveCD" subtitle in dim amber — matches motd exactly
- bee-openbox-session: set wallpaper with feh --bg-fill, fall back to
xsetroot -solid black if wallpaper not found
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Set xsetroot solid background (#12100a, dark amber) so openbox
doesn't show bare black before Chromium opens
- Re-add healthz wait loop before launching Chromium: without it
Chromium opens localhost/loading before bee-web is up and gets
connection-refused which renders as a blank white page
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add TTYReset=yes and TTYVHangup=yes so systemd restores the terminal
to a clean state before handing tty1 to getty. Without this the screen
went black with no cursor after the status display finished.
Also remove DefaultDependencies=no which was too aggressive.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Command substitution in sh strips trailing newlines, so accumulating
output in a variable via $(...) lost all line breaks. Reverted to
direct printf calls which work correctly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Refresh every 3s instead of 1s to reduce flicker
- Show ssh, bee-sshsetup in service list
- Show failure reason for failed services
- Show last journal line for activating services
- Show IP addresses and web UI URL when network is up
- Render frame to variable before printing to reduce flicker
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add bee-boot-status service: shows live service status on tty1 with
ASCII logo before getty, exits when all bee services settle
- Remove lightdm dependency on bee-preflight so GUI starts immediately
without waiting for NVIDIA driver load
- Replace Chromium blank-page problem with /loading spinner page that
polls /api/services and auto-redirects when services are ready; add
"Open app now" override button; use fresh --user-data-dir=/tmp/bee-chrome
- Unify branding: add "Hardware Audit LiveCD" subtitle to GRUB menu,
bee-boot-status (with yellow ASCII logo), and web spinner
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When 8 john processes start simultaneously they race for GPU memory during
OpenCL GWS auto-tuning. Slower devices settle on a smaller work size (~594MiB
vs 762MiB) and run at 40% instead of 100% load. Add 3s sleep between launches
so each instance finishes memory allocation before the next one starts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-john-gpu-stress: spawn one john process per OpenCL device in parallel
so all GPUs are stressed simultaneously instead of only device 1
- bee-openbox-session: --start-fullscreen → --start-maximized to fix blank
white page on first render in fbdev environment
- storage collector: skip Virtual HDisk* devices reported by BMC/iDRAC
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- nvidia collector: read pcie.link.gen.current/max from nvidia-smi instead
of sysfs to avoid false Gen1 readings when GPU is in ASPM idle state
- build: remove bee-nccl-gpu-stress from rm -f list so shell script from
overlay is not silently dropped from the ISO
- smoketest: add explicit checks for bee-gpu-burn, bee-john-gpu-stress,
bee-nccl-gpu-stress, all_reduce_perf
- netconf: re-exec via sudo when not root to fix RTNETLINK/resolv.conf errors
- auto/config: reduce loglevel 7→3 to show clean systemd output on boot
- auto/config: blacklist snd_hda_intel and related audio modules (unused on servers)
- package-lists: remove firmware-intel-sound and firmware-amd-graphics from
base list; move firmware-amd-graphics to bee-amd variant only
- bible-local: mark memtest ADR resolved, document working solution
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Burn tab: replace 6 flat cards with 3 grouped cards (GPU Stress,
Compute Stress, Platform Thermal Cycling) + global Burn Profile
- Run All button at top enqueues all enabled tests across all cards
- GPU Stress: tool checkboxes enabled/disabled via new /api/gpu/tools
endpoint based on driver status (/dev/nvidia0, /dev/kfd)
- Compute Stress: checkboxes for cpu/memory-stress/stressapptest
- Platform Thermal Cycling: component checkboxes (cpu/nvidia/amd)
with platform_components param wired through to PlatformStressOptions
- bee-gpu-burn: default size-mb changed from 64 to 0 (auto); script
now queries nvidia-smi memory.total per GPU and uses 95% of it
- platform_stress: removed hardcoded --size-mb 64; respects Components
field to selectively run CPU and/or GPU load goroutines
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
