live-build picks up ALL .list.chroot files in config/package-lists/.
After rsync, bee-nvidia.list.chroot, bee-amd.list.chroot, and
bee-nogpu.list.chroot all end up in BUILD_WORK_DIR — causing lb to
try installing packages from every variant (and leaving version
placeholders unsubstituted in the unused lists).
Fix: after copying bee-${BEE_GPU_VENDOR}.list.chroot → bee-gpu.list.chroot,
delete all other bee-{nvidia,amd,nogpu}.list.chroot from BUILD_WORK_DIR.
Also includes nomsi boot mode changes (bee-nvidia-load + grub.cfg).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- build.sh: add --variant nvidia|amd; separate work dirs per variant
(live-build-work-nvidia / live-build-work-amd); GPU-specific steps
(modules, NCCL, cuBLAS, nccl-tests) run only for nvidia; deb package
cache synced back to shared location after each lb build so second
variant reuses downloaded packages; ISO output named
easy-bee-{variant}-v{ver}-amd64.iso
- build-in-container.sh: add --variant nvidia|amd|all (default: all);
runs build.sh twice in one container for 'all'; --clean-build wipes
both variant work dirs
- package-lists: remove GPU packages from bee.list.chroot; add
bee-nvidia.list.chroot (DCGM) and bee-amd.list.chroot (ROCm)
- 9000-bee-setup hook: read /etc/bee-gpu-vendor; enable bee-nvidia.service
and DCGM only for nvidia; set up ROCm symlinks only for amd
- auto/config: --iso-volume uses BEE_GPU_VENDOR_UPPER env var
- grub.cfg: add nomodeset to EASY-BEE and EASY-BEE (load to RAM) entries
— fixes X/lightdm on BMC KVM (ASPEED AST chip requires nomodeset for
fbdev to work; NVIDIA H100 compute does not need KMS)
- bee.sh / smoketest.sh: add /usr/sbin to PATH so dmidecode, smartctl,
nvme are found
- 9100-memtest hook: add diagnostic listing of chroot/boot/memtest* files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ROCM_BANDWIDTH_TEST_VERSION, ROCM_VALIDATION_SUITE_VERSION, ROCBLAS,
ROCRAND, HIP_RUNTIME_AMD, HIPBLASLT, COMGR were defined in VERSIONS and
in bee.list.chroot but the sed substitution block only covered 3 of them.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Runs CPU (stressapptest) + GPU stress simultaneously across multiple
load/idle cycles with varying idle durations (120s/60s/30s) to detect
cooling systems that fail to recover under repeated load.
Presets: smoke (~5 min), acceptance (~25 min), overnight (~100 min).
Outputs metrics.csv + summary.txt with per-cycle throttle and fan
spindown analysis, packed as tar.gz.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add modernc.org/sqlite dependency; write every sample to
/appdata/bee/metrics.db (WAL mode, prune to 24h on startup)
- Pre-fill ring buffers from last 120 DB rows on startup so charts
survive service restarts
- Ticker changed 3s→1s; chart JS refresh will be set to 2s (lag ≤3s)
- Add GET /api/metrics/export.csv for full history download
- Chart rendering: SymbolNone (no dots), right padding=80px so peak
mark line label is not clipped, min/avg/max appended to chart title
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Finds the series with the highest value across all datasets and adds
a SeriesMarkTypeMax dashed mark line to it. Since all series share the
same Y axis this effectively shows a single "global peak" line for the
whole chart with a label on the right.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
rvs was not in PATH so the stress job exited immediately (UNSUPPORTED).
Now resolveRVSCommand searches /opt/rocm-*/bin/rvs before failing.
Also add a Copy button overlay on all .terminal elements and set
user-select:text so logs can be copied from the web UI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Legend names were "GPU 0 %" — remove unit suffix since chart title already
conveys it. Fan parsing now handles the 5-field IPMI SDR format where the
value+unit ("4340 RPM") are combined in the last column rather than split
across separate fields.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MI250X outputs 7 temperature columns before power/use%; positional parsing
read junction temp (~40°C) as GPU utilisation. Switch to header-based
colIdx() lookup so the correct fields are read regardless of column order
or rocm-smi version.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add udev rule: /dev/ipmi0 readable by 'ipmi' group (no sudo needed)
- Add 'ipmi' group creation and bee user membership in chroot hook
- Remove legend from all charts (data shown in GPU table below)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without these modules /dev/ipmi0 doesn't exist and ipmitool can't
read fan RPM, PSU fans, or IPMI temperature sensors.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Tccd1-8 (AMD CCD die temps) now classified as 'cpu' group,
appear on CPU Temperature chart instead of ambient
- Fan RPM card hidden when no fans detected
- Remove CPU Load/Mem Load/Power from fan table (have dedicated charts)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add rocm-validation-suite, rocblas, rocrand, hip-runtime-amd,
hipblaslt, comgr to ISO (~700MB, needed for HIP compute)
- RunAMDStressPack: run RVS GST (SGEMM ~31 TFLOPS/GPU) + bandwidth test
- Add rvs symlink in chroot setup hook
- Pin all new package versions in VERSIONS
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add rocm-bandwidth-test package to ISO
- Add bee user to 'render' group (/dev/kfd, /dev/dri/renderD* access)
- Add rocm-bandwidth-test symlink alongside rocm-smi
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ip route show includes state flags like 'linkdown' that ip route add
does not accept, causing restore to fail.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace per-GPU cards with 4 combined charts showing all GPUs as
separate series. Add gpu-all-load/memload/power/temp endpoints.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-web.service: remove After=bee-audit so Go starts immediately
- Go serves loading page from / when audit JSON not yet present;
JS polls /api/ready (503 until file exists, 200 when ready)
then redirects to dashboard
- bee-openbox-session: wait for /healthz (Go binds fast <2s),
open http://localhost/ directly — no file:// cross-origin issues
- Remove loading.html static file
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace 15s blocking wait with instant Chromium launch showing a
dark loading page that polls /healthz every 500ms and auto-redirects
to the app when ready.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
memtest files live in chroot /boot (inside squashfs) but GRUB needs
them on the ISO filesystem. Binary hook copies them out at build time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Switch to performance governor when task queue starts processing,
back to powersave when queue drains. Removes bee-cpuperf.service.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move datacenter-gpu-manager and rocm-smi-lib from dynamic chroot hooks
into live-build's config/archives mechanism so lb caches the .deb files
in cache/packages.chroot/ between builds, eliminating repeated 900+ MB
downloads. Versions pinned via VERSIONS and substituted into package
lists at build time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- jobState now has optional cancel func; abort() calls it if job is running
- handleAPISATRun passes cancellable context to RunNvidiaAcceptancePackWithOptions
- POST /api/sat/abort?job_id=... cancels the running SAT job
- bible-local/runtime-flows.md: replace TUI SAT flow with Web UI flow
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--clean-build clears all caches (Go, NVIDIA, lb packages, work dir)
and rebuilds the Docker image, then proceeds with a full clean build.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Removes all cached build artifacts: Go cache, NVIDIA/NCCL/cuBLAS
downloads, lb package cache, and live-build work dir. Use before
a clean rebuild or when switching Debian/kernel versions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Expose the existing bee-install script through the web UI:
- platform/install.go: remove USB exclusion, add SizeBytes/MountedParts
fields, add MinInstallBytes()/DiskWarnings() safety checks (size,
mounted partitions, toram+low-RAM warning)
- webui: add GET /api/install/disks, POST /api/install/run,
GET /api/install/stream endpoints
- webui: add Install to Disk page with disk table, warning badges,
device-name confirmation gate, SSE progress terminal, reboot button
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Switch squashfs compression from xz to zstd (3-5x faster compression,
~10-15% larger but decompresses faster at boot)
- Stop rm -rf BUILD_WORK_DIR on each build; rsync only config changes
so lb can reuse its chroot across builds (skips apt install step)
- Keep lb-packages cache in CACHE_ROOT as fallback if work dir is wiped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
apt-cacher-ng requires a separate container; lb's own package cache
persisted in --cache-dir is simpler and sufficient.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Saves cache/packages.chroot before wiping BUILD_WORK_DIR and
restores it after, so apt packages are not re-downloaded on every
build. Cache lives in --cache-dir (same place as Go/NVIDIA cache).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pass APT_PROXY=http://host:3142 to build-in-container.sh to route
all apt traffic through a local cache. Also supports --apt-proxy flag.
Mirrors in auto/config are set from BEE_APT_PROXY env when present.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
toram was incorrectly added to the default bootappend-live causing
every boot to copy the full ISO to RAM (slow on BMC virtual media).
Default boot reads squashfs from media; toram is available as a
separate menu entry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Removes ~100-300MB from the squashfs: man pages, non-en locales,
python cache, apt lists and package cache, temp files and logs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without this, git refuses to read the bind-mounted repo (UID mismatch)
and describe returns empty, causing the version to fall back to iso/v1.0.20.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Mount chart submodule static assets at /static/ (matching the template's
hardcoded href), fix nav to include Audit Snapshot tab, remove dead
renderViewerPage code and iframe from Dashboard.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without toram the squashfs is read from the physical medium at runtime.
Disconnecting the USB/CD after boot causes SQUASHFS I/O errors on any
uncached block, making all X11 apps crash with SIGBUS.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- All prompts accept 'a' = abort, 'b' = back to previous step
- Interface input: validate numeric range and name existence, re-prompt on bad input
- IP address: regex check x.x.x.x/prefix format
- Gateway: regex check x.x.x.x format
- Main loop: 'b' at mode selection goes back to interface list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On real server hardware (IPMI/BMC AST chip + nomodeset) the VESA
framebuffer is set by BIOS at whatever resolution it chooses (often
1024x768 or 1280x1024). The hardcoded 1920x1080 Modeline caused X to
fail → LightDM crash-loop → SOL console flooded with systemd messages.
- Remove Monitor section / Modeline from xorg.conf — fbdev now uses
whatever framebuffer resolution the kernel provides
- Add lightdm.service.d/bee-limits.conf: RestartSec=10,
max 3 restarts per 60s so headless hardware doesn't spam the console
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
User sees a numbered list but could only type the name.
Now numeric input is resolved to the interface name via awk NR==N.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Plain v2.x tags are now the active tagging scheme; iso/v1.0.x tags
are legacy. Swap priority in resolve_iso_version so the ISO is named
bee-debian12-v2.x-amd64.iso instead of v1.0.x-N-gHASH.
Also tighten the v* pattern to v[0-9]* to avoid accidentally matching
other prefixed tags in both resolve functions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace dark #0f1117 theme with clean white/Semantic-UI-inspired
design matching the updated internal/chart submodule: white surface,
dark sidebar (#1b1c1d), Lato font, blue accent (#2185d0), subtle
borders. Also update submodule pointer to latest commit.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- One engine: go-analyze/charts (grafana theme) for all live metrics
- Server chart: CPU temp, CPU load%, mem load%, power W, fan RPMs
- GPU charts: temp, load%, mem%, power W — one card per GPU, added dynamically
- Charts 1400x280px SVG, rendered at width:100% in single-column layout
- Add CPU load (from /proc/stat) and mem load (from /proc/meminfo) to LiveMetricSample
- Add GPU mem utilization to GPUMetricRow (nvidia-smi utilization.memory)
- Document charting architecture in bible-local/architecture/charting.md
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
make run — starts web UI on :8080
make run LISTEN=:9090 — custom port
make run AUDIT_PATH=/tmp/bee.json — with audit data
make build / make test
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
resolve_iso_version only matched iso/v* pattern; GUI release tags
(v2, v2.1 ... v2.6) were ignored, falling back to the old v1.0.20
annotated tag via resolve_audit_version.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add video=1920x1080 to kernel cmdline (sets fbdev to Full HD)
- Update GRUB gfxmode to 1920x1080 (fallback to 1280x1024,auto)
- Add Xorg Monitor section with 1920x1080 Modeline and preferred mode
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Metrics:
- Replace canvas JS charts with server-side SVG via go-analyze/charts
- Add ring buffers (120 samples) for CPU temp and power
- /api/metrics/chart/{name}.svg endpoint serves live SVG, polled every 2s
Dashboard:
- Replace custom renderViewerPage with viewer.RenderHTML() from reanimator/chart submodule
- Mount chart static assets at /chart/static/
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove all emojis from sidebar nav and logo (broken on server console fonts)
- Fix canvas chart: use parentElement.getBoundingClientRect() for width,
set explicit H=120px — fixes empty charts when offsetWidth/Height is 0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace raw systemctl output in table cell with:
- state badge (active/failed/inactive) — click to expand
- full systemctl status in collapsible pre block (max 200px scroll)
Fixes layout explosion from multi-line status text in table.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from user shell has /dev/fb0 permission issues and is fragile.
LightDM starts Xorg as root — standard LiveCD approach that works
on server hardware / IPMI KVM with nomodeset + fbdev/vesa.
- Add lightdm package, configure autologin as bee/openbox session
- Add /usr/share/xsessions/openbox.desktop
- Remove startx from .profile (LightDM manages X lifecycle)
- Remove Xwrapper.config needs_root_rights workaround (no longer needed)
- Enable lightdm.service in setup hook
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If X fails to start, the user gets a working shell prompt instead
of a dead session or autologin loop.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Interactive script: lists interfaces, DHCP or static IP config.
Shown as hint in tty1 welcome message.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Explicit xorg.conf.d config prevents Xorg from trying KMS/DRM
drivers that fail on server hardware with nomodeset.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from autologin shell targets VT1 directly — KVM sees the
graphical UI without VT switching. Remove bee-desktop.service
(systemd-launched X defaults to VT7, invisible on KVM).
Add xserver-xorg-video-fbdev for server AST/VGA framebuffer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
grub-pc and grub-efi-amd64 conflict with each other in Debian 12.
The -bin packages provide the same grub-install binaries without conflict.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Copies the live system to a local disk via unsquashfs — no debootstrap,
no network required. Supports UEFI (GPT+EFI) and BIOS (MBR) layouts.
ISO:
- Add squashfs-tools, parted, grub-pc, grub-efi-amd64 to package list
- New overlay script bee-install: partitions, formats, unsquashfs,
writes fstab, runs grub-install+update-grub in chroot
Go TUI:
- Settings → Tools submenu (Install to disk, Check tools)
- Disk picker screen: lists non-USB, non-boot disks via lsblk
- Confirm screen warns about data loss
- Runs with live progress tail of /tmp/bee-install.log
- platform/install.go: ListInstallDisks, InstallToDisk, findLiveBootDevice
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Default boot no longer loads ISO to RAM (slow on BMC virtual media).
Separate menu entry added for toram in both GRUB and isolinux.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
nv/target has no .h suffix; use -type f instead of -name '*.h' to
detect non-empty include directories.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
cuda_fp16.h (included by cublas_api.h) requires <nv/target> from
the CUDA C++ Core Libraries (cuda-cccl-13-0).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ls *.h missed headers in subdirectories like crt/host_defines.h;
use find -maxdepth 2 instead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
cuda-crt-13-0 may not share the same version string as cuda-cudart-13-0;
pass empty version to lookup_pkg to match the first available version.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
cublasLt.h -> cublas_api.h -> driver_types.h -> crt/host_defines.h
which lives in the cuda-crt-13-0 package, not cudart-dev.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NVIDIA CUDA .deb packages install headers under
/usr/local/cuda-X.Y/targets/x86_64-linux/include/ not /usr/include/,
causing copy_headers() to silently skip them.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
awk exit in the blank-line block jumps to END, which printed the
result again causing repo_sha to contain the hash twice with a newline,
breaking the sha256 string comparison.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Debian Packages.gz uses CRLF line endings; \r in the captured SHA256
field caused string comparison to fail even when hashes were identical.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Echo messages captured in stdout polluted the return value of
download_verified_pkg(), causing extract_deb() to receive a
multi-line string instead of a file path and silently exit via set -e.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mchusandClaude Sonnet 4.6