storcli64 enumerates these controllers but reports zero drives; storcli2
is the tool Broadcom ships for Tri-Mode/MegaRAID8 hardware and uses a
compatible JSON schema for drive listing. Wires storcli2 into both the
collector (structured drive data) and the webui RAID Management page
(dedup so a controller isn't double-listed if storcli64 already sees it
with zero drives), plus techdump raw collection and the ISO vendor-tool
build step.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only visualization page: CPU sockets as anchor nodes, PCIe
devices (GPU/NIC/RAID) linked to their NUMA-affine socket with edge
color derived strictly from link_speed vs max_link_speed (not from the
device's own Status, which can also be overwritten by SAT-test results
on the same field), PSU/BMC as standalone boxes with no connecting
line, and a separate NVLink Topology card (live nvidia-smi topo -m /
nvlink -s/-e queries, not persisted to any contract).
GPU-GPU edges are drawn strictly from the actual bonded-pair list
parsed out of "nvidia-smi topo -m" (parseGPUPairAdjacency), not from
adjacent box position in the layout — an earlier ASCII mockup drew a
"chain" through unrelated GPUs, which a dedicated regression test now
guards against. A bonded pair spanning two different NUMA nodes is
flagged Warning on the edge and on both GPU boxes, per project
decision that this is an anomaly worth surfacing, not a neutral fact.
Zero changes to the ingest contract: this reverts the HardwareNVLinkPort/
HardwarePCIeDevice.NVLinks field shipped in v11.55 (33d6eee) along with
its collector/nvidia.go enrichment — that field risked a 400 from
Reanimator Core's strict decoder without an RFC, and isn't needed since
the topo page queries nvidia-smi directly instead of reading it from
audit.json. The v11.55 systemd fix (bee-nvidia.service ordering,
nv-hostengine restart) and the nvlink-status/-errors/dcgmi dumps in the
support bundle are untouched.
Also reorganizes support bundle collection per project convention:
system/ is now LiveCD-operational logs only (Xorg, services, console,
network/FS of the host itself); all server-hardware dumps (lspci,
NVIDIA/NVLink/DCGM, fabric manager, PCIe AER, ethtool, mstflint) move
to techdump/, deduplicating two entries already produced by
platform/techdump.go. Adds nvidia-bug-report.sh (previously only
collected inside the NVIDIA SAT pack) and lscpu to the always-on dump.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- audit JSON: IPMI sensor readings (ipmitool sensor) merged into hardware.sensors alongside lm-sensors data
- audit JSON: IPMI SEL entries (ipmitool sel list) in hardware.event_logs with source "ipmi-sel"
- audit JSON: dmesg error/warning lines in hardware.event_logs with source "dmesg" (filtered by error/warn/AER/Xid/NVRM/ECC/panic patterns)
- support bundle: added ipmitool-sensor.txt, ipmitool-sel.txt, ipmitool-sel-time.txt to techdump
- saa_dmi.go: fix dmiItemRE to accept SHN with parentheses (e.g. PS(4)LC for PSU fields)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- collector/pcie: add applyPCIeLinkSpeedWarning that sets status=Warning
and ErrorDescription when current link speed is below maximum negotiated
speed (e.g. Gen1 running on a Gen5 slot)
- collector/pcie: add pcieLinkSpeedRank helper for Gen string comparison
- collector/pcie_filter_test: cover degraded and healthy link speed cases
- platform/techdump: collect lspci -vvv → lspci-vvv.txt for LnkCap/LnkSta
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
