Drops the in-panel sanitize sub-block (button + preview table + "already
sanitized" note) that duplicated affordances across the page. The header
"Clear Data" button is renamed "Remove personal data" and now sanitizes the
uploaded file and downloads the clean copy in one click - no preview, no
confirmation. It is shown only when the source can be sanitized, and reads
"Personal data removed" (disabled) when the file already looks de-identified.
The old clearData() teardown is covered by Restart.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds internal/sanitize: rewrites the customer-identifying spans that
internal/privacy detects (domain/FQDN/e-mail/AD/public-IP/timezone) with
same-length neutral fillers, in place, without changing the file format.
- Fillers keep byte length: "sigma.sbrf.ru" -> "xxxxx.xxxx.xx", IP ->
"00.000.000.00", "Europe/Moscow" -> "Etc/Universal" (same-length valid
neutral IANA zone), offset "180" -> "000". Timestamps are not recomputed.
- Lossless recursive archive walk (tar/.sds/gz/tgz/zip): entry names, modes,
and all embedded timestamps preserved; untouched zip entries copied raw;
member payload length unchanged so tar headers stay byte-identical; only the
.gz/.zip compression layer is rebuilt. 0 redactions -> byte-identical output.
- privacy.FindSpans is the one matcher shared by detection and redaction;
fillers are recognised by isRedactionFiller so a re-scan / second pass is a
no-op. New privacy FPs fixed along the way: syslog selectors (local7.info),
"MEVersion" firmware quads, *.conf_bak vendor templates, bundled viewer
domains.
- Binary members (FRU.bin, localtime, redis-dump.rdb, SOL captures) and
unreadable nested archives are reported in Result.SkippedBinary, never edited.
- Surfaces: POST /api/sanitize (+ GET /api/sanitize/download), the "Обезличить
и скачать копию" button in the Customer-data panel, and
logpile -sanitize <file> (restores mtime/atime).
Verified: re-parsing a sanitized Dell TSR / xFusion / Inspur onekeylog / H3C
.sds yields the identical hardware inventory; re-scan is clean. ADL-067,
bible-local/docs/log-sanitization.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Move the "Customer data" panel to the top of the data section (above the
chart iframe); header + customer guess always visible, findings table
collapsed by default and expandable.
- Add a chart top-notice (above Board/CPUs) summarizing the scan via the
viewer's standard NoticeTitle/NoticeBody - interim until chart custom panels.
- Allowlist ieisystem.com (IEI = Inspur brand infrastructure).
- Add chart-custom-panels-spec.md: a reusable, versioned contract proposal for
host-supplied panels across every app embedding reanimator/chart.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Detection-only scan (internal/privacy) attached to every AnalysisResult:
a customer-domain guess plus a findings list (category, file, line, match,
hint), ported from the KB grep playbook. Runs on archive uploads and the
serialized Redfish tree; gated by LOGPILE_PRIVACY_SCAN (default on).
Surfaced at GET /api/privacy-scan, in the "Customer data" UI panel, and as
privacy_report.json in the raw-export bundle. IP policy keeps RFC1918 and
example ranges out of findings; allowlist covers standards-body and vendor
infrastructure domains. No customer tokens in the repo. See ADL-066 and
bible-local/docs/privacy-scan.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a PDF button to the report header. Clicking it opens
/chart/current?print=true in a new tab, which auto-triggers
window.print() so the user can save to PDF via the browser dialog.
- chart submodule bumped: PrintMode support (no filter JS, auto-print,
@media print CSS)
- handlers.go: passes PrintMode=true when ?print=true query param is set
- index.html: PDF button alongside Raw Data / Reanimator
- app.js: printReport() helper; button shown/hidden with other exports
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When Inspur component.log sections return {"error":"...","code":N} instead
of hardware data, the parser now:
- stores them in AnalysisResult.CollectionErrors (new model field)
- mirrors each one into result.Events with Source="BMC/<section>"
so the chart viewer event table shows the specific BMC module
- feeds them into /api/parse-errors as bmc_collection_error entries
UI adds a collapsible "Collection diagnostics" panel below the chart
iframe (outside /chart) that appears when /api/parse-errors returns
any items; resets on data clear.
Affected sections in this dump: HDD (1458), PCIe Devices (1458),
Network Adapters (1458), Disk Backplane.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parse inventory_volume.log: Intel VROC (VMD) RAID volumes including
RAID level, capacity (GiB/TiB support added), status and member drives.
Add Drives []string to StorageVolume model.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove power-on and power-off functionality from the Redfish collector;
keep host power-state detection and show a warning in the UI when the
host is powered off before collection starts.
Add a "Пропустить зависшие" (skip hung) button that lets the user abort
stuck Redfish collection phases without losing already-collected data.
Introduces a two-level context model in Collect(): the outer job context
covers the full lifecycle including replay; an inner collectCtx covers
snapshot, prefetch, and plan-B phases only. Closing the skipCh cancels
collectCtx immediately — aborts all in-flight HTTP requests and exits
plan-B loops — then replay runs on whatever rawTree was collected.
Signal path: UI → POST /api/collect/{id}/skip → JobManager.SkipJob()
→ close(skipCh) → goroutine in Collect() → cancelCollect().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add HPE iLO Redfish profile (priority 20): matches on manufacturer/OEM/iLO signals,
adds SmartStorage/SmartStorageConfig to critical paths, sets realistic ETA baseline
and rate policy for iLO's known slowness
- Fix post-probe hang on HPE iLO: skip numeric probing of collections where
Members@odata.count == len(Members); add 4s postProbeClient timeout as safety net
- Exclude /WorkloadPerformanceAdvisor from crawl paths
- Fix replay parser: skip absent CPU sockets, absent DIMM slots, absent drive bays
- Filter N/A version entries from firmware inventory
- Remove drive firmware from general firmware list (already in Storage[].Firmware)
- Add HPE AHS (.ahs) archive parser with hybrid SMBIOS/Redfish extraction
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Single "Подключиться" button flow: probe first, then show collect options
- Power management checkboxes: power on before / stop after collect
- Modal confirmation when enabling shutdown on already-powered-on host
- StopHostAfterCollect flag: host shuts down only when explicitly requested
- TCP ping (10 attempts, min 3 successes) before Redfish probe
- Debug payloads checkbox (Oem/Ami/Inventory/Crc, off by default)
- Remove platform_config BIOS settings collection (unreliable on AMI)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Collect hardware event logs (last 7 days) from Systems and Managers/SEL LogServices
- Parse AMI raw IPMI dump messages into readable descriptions (Sensor_Type: Event_Type)
- Filter out audit/journal/non-hardware log services; only SEL from Managers
- MSI ghost GPU filter: exclude processor GPU entries with temperature=0 when host is powered on
- Reanimator collected_at uses InventoryData/Status.LastModifiedTime (30-day fallback)
- Invalidate Redfish inventory CRC groups before host power-on
- Log inventory LastModifiedTime age in collection logs
- Drop SecureBoot collection (SecureBootMode, SecureBootDatabases) — not hardware inventory
- Add build version to UI footer via template
- Add MSI Redfish API reference doc to bible-local/docs/
ADL-032–ADL-035
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implement the full architectural plan: unified ingest.Service entry point
for archive and Redfish payloads, modular redfishprofile package with
composable profiles (generic, ami-family, msi, supermicro, dell,
hgx-topology), score-based profile matching with fallback expansion mode,
and profile-driven acquisition/analysis plans.
Vendor-specific logic moved out of common executors and into profile hooks.
GPU chassis lookup strategies and known storage recovery collections
(IntelVROC/HA-RAID/MRVL) now live in ResolvedAnalysisPlan, populated by
profiles at analysis time. Replay helpers read from the plan; no hardcoded
path lists remain in generic code.
Also splits redfish_replay.go into domain modules (gpu, storage, inventory,
fru, profiles) and adds full fixture/matcher/directive test coverage
including Dell, AMI, unknown-vendor fallback, and deterministic ordering.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parser / archive:
- Add .sds extension as tar-format alias (archive.go)
- Add tests for multipart upload size limits (multipart_limits_test.go)
- Remove supermicro crashdump parser (ADL-015)
Dell parser:
- Remove GPU duplicates from PCIeDevices (DCIM_VideoView vs DCIM_PCIDeviceView
both list the same GPU; VideoView record is authoritative)
Server:
- Add LOGPILE_CONVERT_MAX_MB env var for independent convert batch size limit
- Improve "file too large" error message with current limit value
Web:
- Add CONVERT_MAX_FILES_PER_BATCH = 1000 cap
- Minor UI copy and CSS fixes
Bible:
- bible-local/06-parsers.md: add pci.ids enrichment rule (enrich model from
pciids when name is empty but vendor_id+device_id are present)
- Sync bible submodule and local overview/architecture docs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implement export to Reanimator format for asset tracking integration.
Features:
- New API endpoint: GET /api/export/reanimator
- Web UI button "Экспорт Reanimator" in Configuration tab
- Auto-detect CPU manufacturer (Intel/AMD/ARM/Ampere)
- Generate PCIe serial numbers if missing
- Merge GPUs and NetworkAdapters into pcie_devices
- Filter components without serial numbers
- RFC3339 timestamp format
- Full compliance with Reanimator specification
Changes:
- Add reanimator_models.go: data models for Reanimator format
- Add reanimator_converter.go: conversion functions
- Add reanimator_converter_test.go: unit tests
- Add reanimator_integration_test.go: integration tests
- Update handlers.go: add handleExportReanimator
- Update server.go: register /api/export/reanimator route
- Update index.html: add export button
- Update CLAUDE.md: document export behavior
- Add REANIMATOR_EXPORT.md: implementation summary
Tests: All tests passing (15+ new tests)
Format spec: example/docs/INTEGRATION_GUIDE.md
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
New parsers:
- NVIDIA Field Diagnostics parser with dmidecode output support
- NVIDIA Bug Report parser with comprehensive hardware extraction
- Supermicro crashdump (CDump.txt) parser
- Generic fallback parser for unrecognized text files
Enhanced GPU parsing (nvidia-bug-report):
- Model and manufacturer detection (NVIDIA H100 80GB HBM3)
- UUID, Video BIOS version, IRQ information
- Bus location (BDF), DMA size/mask, device minor
- PCIe bus type details
New hardware detection (nvidia-bug-report):
- System Information: server S/N, UUID, manufacturer, product name
- CPU: model, S/N, cores, threads, frequencies from dmidecode
- Memory: P/N, S/N, manufacturer, speed for all DIMMs
- Power Supplies: manufacturer, model, S/N, wattage, status
- Network Adapters: Ethernet/InfiniBand controllers with VPD data
- Model, P/N, S/N from lspci Vital Product Data
- Port count/type detection (QSFP56, OSFP, etc.)
- Support for ConnectX-6/7 adapters
Archive handling improvements:
- Plain .gz file support (not just tar.gz)
- Increased size limit for plain gzip files (50MB)
- Better error handling for mixed archive formats
Web interface enhancements:
- Display parser name and filename badges
- Improved file info section with visual indicators
Co-Authored-By: Claude (qwen3-coder:480b) <noreply@anthropic.com>
- Add parser versioning with Version() method and version display on main screen
- Add server model and serial number to Configuration tab and TXT export
- Add auto-browser opening on startup with --no-browser flag
- Add Restart and Exit buttons with graceful shutdown
- Add section overview stats (CPU, Power, Storage, GPU, Network)
- Change PCIe Link display to "x16 PCIe Gen4" format
- Add Location column to Serials section
- Extract BoardInfo from FRU and PlatformId from ThermalConfig
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add mchus.pro branding to header and footer
- Add author info and git repository link
- Add proprietary license (Mike Chus)
- Firmware table: replace count column with separate component/model columns
- Add branding to TXT export reports
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
