Drops the in-panel sanitize sub-block (button + preview table + "already
sanitized" note) that duplicated affordances across the page. The header
"Clear Data" button is renamed "Remove personal data" and now sanitizes the
uploaded file and downloads the clean copy in one click - no preview, no
confirmation. It is shown only when the source can be sanitized, and reads
"Personal data removed" (disabled) when the file already looks de-identified.
The old clearData() teardown is covered by Restart.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Scan now reports PrivacyScan.Sanitized {detected, markers, strong, files,
evidence}. SanitizationMarkers recognises a value slot filled with one
repeated placeholder + separators (xxxxx.xxxx.xx, x@xxxx.xxxx.xx,
000.00.00.0, a decoy timezone) - it matches the shape, not the literal "x",
so evolving the redaction mechanism still trips it.
detected requires corroboration: strong>=2, or strong>=1 && markers>=3, or
markers>=4. A single filler-looking token is reported (markers:1) but never
asserted as sanitized, so a partial future pass or a coincidence does not
read as "done". 0.0.0.0 / 000 / UTC / Etc/UTC are too plausibly intentional
and do not count.
UI: the Customer-data panel shows "файл уже обезличен" and hides the
sanitize button when detected.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014jDYM1nnoZZ3vFz23DDaV1
Adds internal/sanitize: rewrites the customer-identifying spans that
internal/privacy detects (domain/FQDN/e-mail/AD/public-IP/timezone) with
same-length neutral fillers, in place, without changing the file format.
- Fillers keep byte length: "sigma.sbrf.ru" -> "xxxxx.xxxx.xx", IP ->
"00.000.000.00", "Europe/Moscow" -> "Etc/Universal" (same-length valid
neutral IANA zone), offset "180" -> "000". Timestamps are not recomputed.
- Lossless recursive archive walk (tar/.sds/gz/tgz/zip): entry names, modes,
and all embedded timestamps preserved; untouched zip entries copied raw;
member payload length unchanged so tar headers stay byte-identical; only the
.gz/.zip compression layer is rebuilt. 0 redactions -> byte-identical output.
- privacy.FindSpans is the one matcher shared by detection and redaction;
fillers are recognised by isRedactionFiller so a re-scan / second pass is a
no-op. New privacy FPs fixed along the way: syslog selectors (local7.info),
"MEVersion" firmware quads, *.conf_bak vendor templates, bundled viewer
domains.
- Binary members (FRU.bin, localtime, redis-dump.rdb, SOL captures) and
unreadable nested archives are reported in Result.SkippedBinary, never edited.
- Surfaces: POST /api/sanitize (+ GET /api/sanitize/download), the "Обезличить
и скачать копию" button in the Customer-data panel, and
logpile -sanitize <file> (restores mtime/atime).
Verified: re-parsing a sanitized Dell TSR / xFusion / Inspur onekeylog / H3C
.sds yields the identical hardware inventory; re-scan is clean. ADL-067,
bible-local/docs/log-sanitization.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Move the "Customer data" panel to the top of the data section (above the
chart iframe); header + customer guess always visible, findings table
collapsed by default and expandable.
- Add a chart top-notice (above Board/CPUs) summarizing the scan via the
viewer's standard NoticeTitle/NoticeBody - interim until chart custom panels.
- Allowlist ieisystem.com (IEI = Inspur brand infrastructure).
- Add chart-custom-panels-spec.md: a reusable, versioned contract proposal for
host-supplied panels across every app embedding reanimator/chart.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Detection-only scan (internal/privacy) attached to every AnalysisResult:
a customer-domain guess plus a findings list (category, file, line, match,
hint), ported from the KB grep playbook. Runs on archive uploads and the
serialized Redfish tree; gated by LOGPILE_PRIVACY_SCAN (default on).
Surfaced at GET /api/privacy-scan, in the "Customer data" UI panel, and as
privacy_report.json in the raw-export bundle. IP policy keeps RFC1918 and
example ranges out of findings; allowlist covers standards-body and vendor
infrastructure domains. No customer tokens in the repo. See ADL-066 and
bible-local/docs/privacy-scan.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a PDF button to the report header. Clicking it opens
/chart/current?print=true in a new tab, which auto-triggers
window.print() so the user can save to PDF via the browser dialog.
- chart submodule bumped: PrintMode support (no filter JS, auto-print,
@media print CSS)
- handlers.go: passes PrintMode=true when ?print=true query param is set
- index.html: PDF button alongside Raw Data / Reanimator
- app.js: printReport() helper; button shown/hidden with other exports
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Removed max-width/padding constraints — panel now stretches to grid
column width like the viewer-panel above it.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When Inspur component.log sections return {"error":"...","code":N} instead
of hardware data, the parser now:
- stores them in AnalysisResult.CollectionErrors (new model field)
- mirrors each one into result.Events with Source="BMC/<section>"
so the chart viewer event table shows the specific BMC module
- feeds them into /api/parse-errors as bmc_collection_error entries
UI adds a collapsible "Collection diagnostics" panel below the chart
iframe (outside /chart) that appears when /api/parse-errors returns
any items; resets on data clear.
Affected sections in this dump: HDD (1458), PCIe Devices (1458),
Network Adapters (1458), Disk Backplane.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parse inventory_volume.log: Intel VROC (VMD) RAID volumes including
RAID level, capacity (GiB/TiB support added), status and member drives.
Add Drives []string to StorageVolume model.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove power-on and power-off functionality from the Redfish collector;
keep host power-state detection and show a warning in the UI when the
host is powered off before collection starts.
Add a "Пропустить зависшие" (skip hung) button that lets the user abort
stuck Redfish collection phases without losing already-collected data.
Introduces a two-level context model in Collect(): the outer job context
covers the full lifecycle including replay; an inner collectCtx covers
snapshot, prefetch, and plan-B phases only. Closing the skipCh cancels
collectCtx immediately — aborts all in-flight HTTP requests and exits
plan-B loops — then replay runs on whatever rawTree was collected.
Signal path: UI → POST /api/collect/{id}/skip → JobManager.SkipJob()
→ close(skipCh) → goroutine in Collect() → cancelCollect().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Single "Подключиться" button flow: probe first, then show collect options
- Power management checkboxes: power on before / stop after collect
- Modal confirmation when enabling shutdown on already-powered-on host
- StopHostAfterCollect flag: host shuts down only when explicitly requested
- TCP ping (10 attempts, min 3 successes) before Redfish probe
- Debug payloads checkbox (Oem/Ami/Inventory/Crc, off by default)
- Remove platform_config BIOS settings collection (unreliable on AMI)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implement the full architectural plan: unified ingest.Service entry point
for archive and Redfish payloads, modular redfishprofile package with
composable profiles (generic, ami-family, msi, supermicro, dell,
hgx-topology), score-based profile matching with fallback expansion mode,
and profile-driven acquisition/analysis plans.
Vendor-specific logic moved out of common executors and into profile hooks.
GPU chassis lookup strategies and known storage recovery collections
(IntelVROC/HA-RAID/MRVL) now live in ResolvedAnalysisPlan, populated by
profiles at analysis time. Replay helpers read from the plan; no hardcoded
path lists remain in generic code.
Also splits redfish_replay.go into domain modules (gpu, storage, inventory,
fru, profiles) and adds full fixture/matcher/directive test coverage
including Dell, AMI, unknown-vendor fallback, and deterministic ordering.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On folder selection, filter out duplicate files before conversion:
- First pass: same basename → skip (same filename in different subdirs)
- Second pass: same SHA-256 hash → skip (identical content, different path)
Duplicates are excluded from the convert queue and shown as a warning
in the summary with reason (same name / same content).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parser / archive:
- Add .sds extension as tar-format alias (archive.go)
- Add tests for multipart upload size limits (multipart_limits_test.go)
- Remove supermicro crashdump parser (ADL-015)
Dell parser:
- Remove GPU duplicates from PCIeDevices (DCIM_VideoView vs DCIM_PCIDeviceView
both list the same GPU; VideoView record is authoritative)
Server:
- Add LOGPILE_CONVERT_MAX_MB env var for independent convert batch size limit
- Improve "file too large" error message with current limit value
Web:
- Add CONVERT_MAX_FILES_PER_BATCH = 1000 cap
- Minor UI copy and CSS fixes
Bible:
- bible-local/06-parsers.md: add pci.ids enrichment rule (enrich model from
pciids when name is empty but vendor_id+device_id are present)
- Sync bible submodule and local overview/architecture docs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parse inventory/output.log to extract GPU serial numbers from lspci output,
expose them via serials API, and add GPU category to web UI.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
New parsers:
- NVIDIA Field Diagnostics parser with dmidecode output support
- NVIDIA Bug Report parser with comprehensive hardware extraction
- Supermicro crashdump (CDump.txt) parser
- Generic fallback parser for unrecognized text files
Enhanced GPU parsing (nvidia-bug-report):
- Model and manufacturer detection (NVIDIA H100 80GB HBM3)
- UUID, Video BIOS version, IRQ information
- Bus location (BDF), DMA size/mask, device minor
- PCIe bus type details
New hardware detection (nvidia-bug-report):
- System Information: server S/N, UUID, manufacturer, product name
- CPU: model, S/N, cores, threads, frequencies from dmidecode
- Memory: P/N, S/N, manufacturer, speed for all DIMMs
- Power Supplies: manufacturer, model, S/N, wattage, status
- Network Adapters: Ethernet/InfiniBand controllers with VPD data
- Model, P/N, S/N from lspci Vital Product Data
- Port count/type detection (QSFP56, OSFP, etc.)
- Support for ConnectX-6/7 adapters
Archive handling improvements:
- Plain .gz file support (not just tar.gz)
- Increased size limit for plain gzip files (50MB)
- Better error handling for mixed archive formats
Web interface enhancements:
- Display parser name and filename badges
- Improved file info section with visual indicators
Co-Authored-By: Claude (qwen3-coder:480b) <noreply@anthropic.com>
Major improvements:
- Add CSV SEL event parser for Kaytus firmware format
- Add PCIe device parser with link speed/width detection
- Add GPU temperature and PCIe link monitoring
- Add disk backplane parser for storage bay information
- Fix memory module detection (only show installed DIMMs)
Parser enhancements:
- Parse RESTful PCIe Device info (max/current link width/speed)
- Parse GPU sensor data (core and memory temperatures)
- Parse diskbackplane info (slot count, installed drives)
- Parse SEL events from CSV format (selelist.csv)
- Fix memory Present status logic (check mem_mod_status)
Web interface improvements:
- Add PCIe link degradation highlighting (red when current < max)
- Add storage table with Present status and location
- Update memory specification to show only installed modules with frequency
- Sort events from newest to oldest
- Filter out N/A serial numbers from display
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add parser versioning with Version() method and version display on main screen
- Add server model and serial number to Configuration tab and TXT export
- Add auto-browser opening on startup with --no-browser flag
- Add Restart and Exit buttons with graceful shutdown
- Add section overview stats (CPU, Power, Storage, GPU, Network)
- Change PCIe Link display to "x16 PCIe Gen4" format
- Add Location column to Serials section
- Extract BoardInfo from FRU and PlatformId from ThermalConfig
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add mchus.pro branding to header and footer
- Add author info and git repository link
- Add proprietary license (Mike Chus)
- Firmware table: replace count column with separate component/model columns
- Add branding to TXT export reports
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Redesign config page with tabs: Spec, CPU, Memory, Power, Storage, GPU, Network, PCIe
- Parse detailed memory info from component.log with all fields:
Location, Present, Size, Type, Max/Current Speed, Manufacturer, Part Number, Status
- Add GPU model extraction from PCIe devices
- Add NetworkAdapter model with detailed fields from RESTful API
- Update PSU model with power metrics (input/output power, voltage, temperature)
- Memory modules with 0GB size (failed) highlighted in warning color
- Add memory overview stats (total GB, installed count, active count)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
