Fix IPMI FRU editable field detection for abbreviated ipmitool names

ipmitool fru print on some BMC implementations returns short names
("Chassis Serial", "Board Mfg", "Board Product", "Board Serial",
"Product Serial") instead of the full names in the vendor doc.
Add both variants to fruEditableFields so all fields are editable
regardless of which naming convention the BMC uses.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

audit/internal/collector/collector.go

@@ -49,7 +49,8 @@ func Run(_ runtimeenv.Mode) schema.HardwareIngestRequest {
 	snap.VROCLicense = collectVROCLicense(snap.PCIeDevices)
 	snap.PowerSupplies = collectPSUs(derefString(snap.Board.Manufacturer))
 	snap.PowerSupplies = enrichPSUsWithTelemetry(snap.PowerSupplies, sensorDoc)
-	snap.Sensors = buildSensorsFromDoc(sensorDoc)
+	snap.Sensors = mergeIPMISensors(buildSensorsFromDoc(sensorDoc), collectIPMISensors())
+	snap.EventLogs = append(collectIPMISEL(), collectDmesgErrors()...)
 	finalizeSnapshot(&snap, collectedAt)
 
 	// remaining collectors added in steps 1.8 – 1.10

audit/internal/collector/dmesg_events.go

@@ -0,0 +1,129 @@
+package collector
+
+import (
+	"bee/audit/internal/schema"
+	"log/slog"
+	"os/exec"
+	"regexp"
+	"strings"
+	"time"
+)
+
+// dmesg -T output: [Thu Jun 18 14:23:45 2026] message
+// dmesg without -T: [  123.456789] message
+var dmesgTimestampRE = regexp.MustCompile(`^\[([^\]]+)\]\s*(.*)$`)
+
+// Keywords that indicate an error or hardware problem worth capturing.
+var dmesgErrorPatterns = []*regexp.Regexp{
+	regexp.MustCompile(`(?i)\berr(or)?\b`),
+	regexp.MustCompile(`(?i)\bfail(ed|ure)?\b`),
+	regexp.MustCompile(`(?i)\bfault\b`),
+	regexp.MustCompile(`(?i)\bwarn(ing)?\b`),
+	regexp.MustCompile(`(?i)\bAER\b`),
+	regexp.MustCompile(`(?i)\bXid\b`),
+	regexp.MustCompile(`(?i)\bNVRM\b`),
+	regexp.MustCompile(`(?i)\bpanic\b`),
+	regexp.MustCompile(`(?i)\bcorrected\b`),
+	regexp.MustCompile(`(?i)\buncorrect`),
+	regexp.MustCompile(`(?i)\bECC\b`),
+	regexp.MustCompile(`(?i)\btimeout\b`),
+	regexp.MustCompile(`(?i)\breset\b`),
+	regexp.MustCompile(`(?i)\bdead\b`),
+	regexp.MustCompile(`(?i)\bhang\b`),
+	regexp.MustCompile(`(?i)\bstall\b`),
+	regexp.MustCompile(`(?i)\bdisabled\b`),
+}
+
+// collectDmesgErrors runs `dmesg -T` (or `dmesg` without -T on failure) and
+// returns only lines that match known error/warning patterns.
+func collectDmesgErrors() []schema.HardwareEventLog {
+	out, err := exec.Command("dmesg", "-T").Output()
+	if err != nil || len(out) == 0 {
+		// Fallback: dmesg without human-readable timestamps
+		out, err = exec.Command("dmesg").Output()
+		if err != nil || len(out) == 0 {
+			return nil
+		}
+	}
+	entries := parseDmesgErrors(string(out))
+	if len(entries) == 0 {
+		return nil
+	}
+	slog.Info("dmesg: collected error entries", "count", len(entries))
+	return entries
+}
+
+func parseDmesgErrors(output string) []schema.HardwareEventLog {
+	var entries []schema.HardwareEventLog
+	collectedAt := time.Now().UTC().Format(time.RFC3339)
+
+	for _, line := range strings.Split(output, "\n") {
+		line = strings.TrimSpace(line)
+		if line == "" {
+			continue
+		}
+
+		var timestamp, message string
+		if m := dmesgTimestampRE.FindStringSubmatch(line); m != nil {
+			timestamp = strings.TrimSpace(m[1])
+			message = strings.TrimSpace(m[2])
+		} else {
+			message = line
+		}
+
+		if message == "" {
+			continue
+		}
+		if !matchesAny(message, dmesgErrorPatterns) {
+			continue
+		}
+
+		severity := dmesgSeverity(message)
+		source := "dmesg"
+
+		var eventTime *string
+		if timestamp != "" {
+			t := timestamp
+			eventTime = &t
+		} else {
+			eventTime = &collectedAt
+		}
+
+		entries = append(entries, schema.HardwareEventLog{
+			Source:    source,
+			EventTime: eventTime,
+			Severity:  &severity,
+			Message:   message,
+		})
+	}
+	return entries
+}
+
+func matchesAny(s string, patterns []*regexp.Regexp) bool {
+	for _, p := range patterns {
+		if p.MatchString(s) {
+			return true
+		}
+	}
+	return false
+}
+
+func dmesgSeverity(msg string) string {
+	lower := strings.ToLower(msg)
+	switch {
+	case strings.Contains(lower, "panic") ||
+		strings.Contains(lower, "aer") ||
+		strings.Contains(lower, "uncorrect") ||
+		strings.Contains(lower, "xid") ||
+		strings.Contains(lower, "nvrm"):
+		return statusCritical
+	case strings.Contains(lower, "error") ||
+		strings.Contains(lower, "fault") ||
+		strings.Contains(lower, "fail") ||
+		strings.Contains(lower, "dead") ||
+		strings.Contains(lower, "hang"):
+		return statusCritical
+	default:
+		return statusWarning
+	}
+}

audit/internal/collector/ipmi_sel.go

@@ -0,0 +1,90 @@
+package collector
+
+import (
+	"bee/audit/internal/schema"
+	"fmt"
+	"log/slog"
+	"os/exec"
+	"strings"
+)
+
+// collectIPMISEL runs `ipmitool sel list` and returns parsed event log entries.
+// Returns nil if ipmitool is unavailable or the SEL is empty.
+func collectIPMISEL() []schema.HardwareEventLog {
+	out, err := exec.Command("ipmitool", "sel", "list").Output()
+	if err != nil || len(out) == 0 {
+		return nil
+	}
+	entries := parseIPMISELOutput(string(out))
+	if len(entries) == 0 {
+		return nil
+	}
+	slog.Info("ipmi sel: collected", "entries", len(entries))
+	return entries
+}
+
+// parseIPMISELOutput parses `ipmitool sel list` output.
+// Line format: ID | date | time | sensor | event description | direction
+// Example:    1 | 06/18/2026 | 14:23:45 | Temperature #0x30 | Upper Critical going high | Asserted
+func parseIPMISELOutput(output string) []schema.HardwareEventLog {
+	var entries []schema.HardwareEventLog
+	for _, line := range strings.Split(output, "\n") {
+		line = strings.TrimSpace(line)
+		if line == "" {
+			continue
+		}
+		parts := strings.SplitN(line, "|", 6)
+		if len(parts) < 5 {
+			continue
+		}
+		id := strings.TrimSpace(parts[0])
+		date := strings.TrimSpace(parts[1])
+		timeStr := strings.TrimSpace(parts[2])
+		sensor := strings.TrimSpace(parts[3])
+		event := strings.TrimSpace(parts[4])
+		direction := ""
+		if len(parts) == 6 {
+			direction = strings.TrimSpace(parts[5])
+		}
+
+		var eventTime *string
+		if date != "" && timeStr != "" {
+			t := fmt.Sprintf("%s %s", date, timeStr)
+			eventTime = &t
+		}
+
+		message := event
+		if direction != "" && strings.EqualFold(direction, "Deasserted") {
+			message = event + " (Deasserted)"
+		}
+
+		severity := ipmiSELSeverity(event)
+		isActive := !strings.EqualFold(direction, "Deasserted")
+
+		entry := schema.HardwareEventLog{
+			Source:    "ipmi-sel",
+			EventTime: eventTime,
+			Severity:  &severity,
+			MessageID: &id,
+			Message:   message,
+			IsActive:  &isActive,
+		}
+		if sensor != "" {
+			entry.ComponentRef = &sensor
+		}
+		entries = append(entries, entry)
+	}
+	return entries
+}
+
+func ipmiSELSeverity(event string) string {
+	lower := strings.ToLower(event)
+	switch {
+	case strings.Contains(lower, "critical") || strings.Contains(lower, "non-recoverable"):
+		return statusCritical
+	case strings.Contains(lower, "non-critical") || strings.Contains(lower, "warning") || strings.Contains(lower, "degraded"):
+		return statusWarning
+	default:
+		return "info"
+	}
+}

audit/internal/collector/ipmi_sensors.go

@@ -0,0 +1,216 @@
+package collector
+
+import (
+	"bee/audit/internal/schema"
+	"log/slog"
+	"os/exec"
+	"strconv"
+	"strings"
+)
+
+// collectIPMISensors runs `ipmitool sensor` and returns parsed sensor readings.
+// Returns nil if ipmitool is unavailable or produces no output.
+func collectIPMISensors() *schema.HardwareSensors {
+	out, err := exec.Command("ipmitool", "sensor").Output()
+	if err != nil || len(out) == 0 {
+		return nil
+	}
+	result := parseIPMISensorOutput(string(out))
+	if result == nil {
+		return nil
+	}
+	slog.Info("ipmi sensors: collected",
+		"fans", len(result.Fans),
+		"temperatures", len(result.Temperatures),
+		"power", len(result.Power),
+		"other", len(result.Other),
+	)
+	return result
+}
+
+// parseIPMISensorOutput parses `ipmitool sensor` text output.
+// Each line: name | value | unit | status | lnr | lcr | lnc | unc | ucr | unr
+func parseIPMISensorOutput(output string) *schema.HardwareSensors {
+	result := &schema.HardwareSensors{}
+	seen := map[string]struct{}{}
+
+	for _, line := range strings.Split(output, "\n") {
+		line = strings.TrimSpace(line)
+		if line == "" {
+			continue
+		}
+		parts := strings.Split(line, "|")
+		if len(parts) < 4 {
+			continue
+		}
+		name := strings.TrimSpace(parts[0])
+		rawVal := strings.TrimSpace(parts[1])
+		unit := strings.TrimSpace(parts[2])
+		status := strings.TrimSpace(parts[3])
+
+		if name == "" || rawVal == "na" || rawVal == "N/A" || rawVal == "" {
+			continue
+		}
+
+		value, err := strconv.ParseFloat(rawVal, 64)
+		if err != nil {
+			continue
+		}
+
+		statusStr := normalizeIPMISensorStatus(status)
+
+		switch {
+		case strings.EqualFold(unit, "RPM"):
+			if duplicateSensor(seen, "fan", name) {
+				continue
+			}
+			rpm := int(value)
+			item := schema.HardwareFanSensor{Name: name, RPM: &rpm}
+			if statusStr != "" {
+				item.Status = &statusStr
+			}
+			result.Fans = append(result.Fans, item)
+
+		case strings.EqualFold(unit, "degrees C") || strings.EqualFold(unit, "C"):
+			if duplicateSensor(seen, "temp", name) {
+				continue
+			}
+			item := schema.HardwareTemperatureSensor{Name: name, Celsius: &value}
+			if len(parts) >= 9 {
+				if unc := parseIPMIThreshold(parts[7]); unc != nil {
+					item.ThresholdWarningCelsius = unc
+				}
+				if ucr := parseIPMIThreshold(parts[8]); ucr != nil {
+					item.ThresholdCriticalCelsius = ucr
+				}
+			}
+			if statusStr != "" {
+				item.Status = &statusStr
+			} else {
+				item.Status = deriveTemperatureStatus(item.Celsius, item.ThresholdWarningCelsius, item.ThresholdCriticalCelsius)
+			}
+			result.Temperatures = append(result.Temperatures, item)
+
+		case strings.EqualFold(unit, "Volts") || strings.EqualFold(unit, "V"):
+			if duplicateSensor(seen, "power", name) {
+				continue
+			}
+			item := schema.HardwarePowerSensor{Name: name, VoltageV: &value}
+			if statusStr != "" {
+				item.Status = &statusStr
+			}
+			result.Power = append(result.Power, item)
+
+		case strings.EqualFold(unit, "Watts") || strings.EqualFold(unit, "W"):
+			if duplicateSensor(seen, "power", name) {
+				continue
+			}
+			item := schema.HardwarePowerSensor{Name: name, PowerW: &value}
+			if statusStr != "" {
+				item.Status = &statusStr
+			}
+			result.Power = append(result.Power, item)
+
+		case strings.EqualFold(unit, "Amps") || strings.EqualFold(unit, "A"):
+			if duplicateSensor(seen, "power", name) {
+				continue
+			}
+			item := schema.HardwarePowerSensor{Name: name, CurrentA: &value}
+			if statusStr != "" {
+				item.Status = &statusStr
+			}
+			result.Power = append(result.Power, item)
+
+		default:
+			if duplicateSensor(seen, "other", name) {
+				continue
+			}
+			item := schema.HardwareOtherSensor{Name: name, Value: &value}
+			if unit != "" {
+				item.Unit = &unit
+			}
+			if statusStr != "" {
+				item.Status = &statusStr
+			}
+			result.Other = append(result.Other, item)
+		}
+	}
+
+	if len(result.Fans) == 0 && len(result.Temperatures) == 0 && len(result.Power) == 0 && len(result.Other) == 0 {
+		return nil
+	}
+	return result
+}
+
+func parseIPMIThreshold(raw string) *float64 {
+	s := strings.TrimSpace(raw)
+	if s == "" || s == "na" || s == "N/A" {
+		return nil
+	}
+	v, err := strconv.ParseFloat(s, 64)
+	if err != nil {
+		return nil
+	}
+	return &v
+}
+
+func normalizeIPMISensorStatus(s string) string {
+	switch strings.ToLower(s) {
+	case "ok":
+		return statusOK
+	case "cr", "ucr", "lcr":
+		return statusCritical
+	case "nc", "unc", "lnc", "nr", "unr", "lnr":
+		return statusWarning
+	case "ns", "na":
+		return ""
+	default:
+		return ""
+	}
+}
+
+// mergeIPMISensors appends IPMI sensor entries into existing, skipping names already present.
+func mergeIPMISensors(existing, ipmi *schema.HardwareSensors) *schema.HardwareSensors {
+	if ipmi == nil {
+		return existing
+	}
+	if existing == nil {
+		return ipmi
+	}
+
+	existingNames := map[string]struct{}{}
+	for _, s := range existing.Fans {
+		existingNames["fan\x00"+s.Name] = struct{}{}
+	}
+	for _, s := range existing.Temperatures {
+		existingNames["temp\x00"+s.Name] = struct{}{}
+	}
+	for _, s := range existing.Power {
+		existingNames["power\x00"+s.Name] = struct{}{}
+	}
+	for _, s := range existing.Other {
+		existingNames["other\x00"+s.Name] = struct{}{}
+	}
+
+	for _, s := range ipmi.Fans {
+		if _, ok := existingNames["fan\x00"+s.Name]; !ok {
+			existing.Fans = append(existing.Fans, s)
+		}
+	}
+	for _, s := range ipmi.Temperatures {
+		if _, ok := existingNames["temp\x00"+s.Name]; !ok {
+			existing.Temperatures = append(existing.Temperatures, s)
+		}
+	}
+	for _, s := range ipmi.Power {
+		if _, ok := existingNames["power\x00"+s.Name]; !ok {
+			existing.Power = append(existing.Power, s)
+		}
+	}
+	for _, s := range ipmi.Other {
+		if _, ok := existingNames["other\x00"+s.Name]; !ok {
+			existing.Other = append(existing.Other, s)
+		}
+	}
+	return existing
+}

audit/internal/platform/techdump.go

@@ -25,6 +25,9 @@ var techDumpFixedCommands = []struct {
 	{Name: "sensors", Args: []string{"-j"}, File: "sensors.json"},
 	{Name: "ipmitool", Args: []string{"fru", "print"}, File: "ipmitool-fru.txt"},
 	{Name: "ipmitool", Args: []string{"sdr"}, File: "ipmitool-sdr.txt"},
+	{Name: "ipmitool", Args: []string{"sensor"}, File: "ipmitool-sensor.txt"},
+	{Name: "ipmitool", Args: []string{"sel", "list"}, File: "ipmitool-sel.txt"},
+	{Name: "ipmitool", Args: []string{"sel", "time", "get"}, File: "ipmitool-sel-time.txt"},
 	{Name: "nvme", Args: []string{"list", "-o", "json"}, File: "nvme-list.json"},
 }
 

audit/internal/webui/api.go

@@ -1292,6 +1292,22 @@ func (h *handler) handleAPIInstallToRAM(w http.ResponseWriter, r *http.Request)
 	_ = json.NewEncoder(w).Encode(map[string]string{"task_id": t.ID})
 }
 
+func (h *handler) handleAPISystemReboot(w http.ResponseWriter, r *http.Request) {
+	if err := exec.Command("systemctl", "reboot").Start(); err != nil {
+		writeError(w, http.StatusInternalServerError, "reboot failed: "+err.Error())
+		return
+	}
+	writeJSON(w, map[string]string{"status": "rebooting"})
+}
+
+func (h *handler) handleAPISystemShutdown(w http.ResponseWriter, r *http.Request) {
+	if err := exec.Command("systemctl", "poweroff").Start(); err != nil {
+		writeError(w, http.StatusInternalServerError, "shutdown failed: "+err.Error())
+		return
+	}
+	writeJSON(w, map[string]string{"status": "shutting down"})
+}
+
 // ── Tools ─────────────────────────────────────────────────────────────────────
 
 var standardTools = []string{

audit/internal/webui/ipmi_fru.go

@@ -0,0 +1,301 @@
+package webui
+
+import (
+	"context"
+	"encoding/json"
+	"fmt"
+	"net/http"
+	"os"
+	"os/exec"
+	"path/filepath"
+	"strings"
+	"time"
+	"unicode"
+)
+
+type fruField struct {
+	Name     string `json:"name"`
+	Value    string `json:"value"`
+	Editable bool   `json:"editable"`
+	Area     string `json:"area,omitempty"`
+	Index    int    `json:"index,omitempty"`
+}
+
+type fruChange struct {
+	Area  string `json:"area"`
+	Index int    `json:"index"`
+	Name  string `json:"name"`
+	Value string `json:"value"`
+}
+
+// fruEditableFields maps display name → area + index for ipmitool fru edit.
+var fruEditableFields = map[string]struct {
+	Area  string
+	Index int
+}{
+	// Chassis — vendor doc names and ipmitool abbreviated names
+	"Chassis Part Number":   {"c", 0},
+	"Chassis Serial Number": {"c", 1},
+	"Chassis Serial":        {"c", 1},
+	"Chassis Extra":         {"c", 2},
+	// Board — vendor doc names and ipmitool abbreviated names
+	"Board Manufacturer": {"b", 0},
+	"Board Mfg":          {"b", 0},
+	"Board Product Name": {"b", 1},
+	"Board Product":      {"b", 1},
+	"Board Serial Number": {"b", 2},
+	"Board Serial":       {"b", 2},
+	"Board Part Number":  {"b", 3},
+	// Product — vendor doc names and ipmitool abbreviated names
+	"Product Manufacturer": {"p", 0},
+	"Product Name":         {"p", 1},
+	"Product Part Number":  {"p", 2},
+	"Product Version":      {"p", 3},
+	"Product Serial Number": {"p", 4},
+	"Product Serial":       {"p", 4},
+}
+
+func parseFRUOutput(output string) []fruField {
+	var fields []fruField
+	for _, line := range strings.Split(output, "\n") {
+		// Lines look like: " Field Name            : value"
+		trimmed := strings.TrimLeft(line, " \t")
+		if trimmed == "" {
+			continue
+		}
+		colon := strings.Index(trimmed, " : ")
+		if colon < 0 {
+			// try ": " with no leading space before colon
+			colon = strings.Index(trimmed, ": ")
+			if colon < 0 {
+				continue
+			}
+			name := strings.TrimSpace(trimmed[:colon])
+			value := strings.TrimSpace(trimmed[colon+2:])
+			if name == "" {
+				continue
+			}
+			editable, area, idx := fruFieldMeta(name)
+			fields = append(fields, fruField{Name: name, Value: value, Editable: editable, Area: area, Index: idx})
+			continue
+		}
+		name := strings.TrimSpace(trimmed[:colon])
+		value := strings.TrimSpace(trimmed[colon+3:])
+		if name == "" {
+			continue
+		}
+		editable, area, idx := fruFieldMeta(name)
+		fields = append(fields, fruField{Name: name, Value: value, Editable: editable, Area: area, Index: idx})
+	}
+	return fields
+}
+
+func fruFieldMeta(name string) (editable bool, area string, index int) {
+	if e, ok := fruEditableFields[name]; ok {
+		return true, e.Area, e.Index
+	}
+	return false, "", 0
+}
+
+func (h *handler) handleAPIIPMIFRURead(w http.ResponseWriter, r *http.Request) {
+	ctx, cancel := context.WithTimeout(r.Context(), 30*time.Second)
+	defer cancel()
+
+	out, err := exec.CommandContext(ctx, "ipmitool", "fru", "print", "0").CombinedOutput()
+	if err != nil {
+		msg := strings.TrimSpace(string(out))
+		if msg == "" {
+			msg = err.Error()
+		}
+		writeError(w, http.StatusInternalServerError, "ipmitool fru print: "+msg)
+		return
+	}
+
+	fields := parseFRUOutput(string(out))
+	writeJSON(w, fields)
+}
+
+func (h *handler) handleAPIIPMIFRUWrite(w http.ResponseWriter, r *http.Request) {
+	var req struct {
+		Changes []fruChange `json:"changes"`
+	}
+	if err := json.NewDecoder(r.Body).Decode(&req); err != nil {
+		writeError(w, http.StatusBadRequest, "invalid JSON")
+		return
+	}
+	if len(req.Changes) == 0 {
+		writeError(w, http.StatusUnprocessableEntity, "no changes provided")
+		return
+	}
+	validAreas := map[string]bool{"c": true, "b": true, "p": true}
+	for _, c := range req.Changes {
+		if !validAreas[c.Area] {
+			writeError(w, http.StatusUnprocessableEntity, "invalid area: "+c.Area)
+			return
+		}
+		if c.Index < 0 || c.Index > 9 {
+			writeError(w, http.StatusUnprocessableEntity, fmt.Sprintf("invalid index %d", c.Index))
+			return
+		}
+		if len(c.Value) > 64 {
+			writeError(w, http.StatusUnprocessableEntity, "value too long (max 64 chars)")
+			return
+		}
+		for _, ch := range c.Value {
+			if ch > unicode.MaxASCII || (ch < 0x20 && ch != 0) {
+				writeError(w, http.StatusUnprocessableEntity, "value contains non-printable characters")
+				return
+			}
+		}
+	}
+
+	t := &Task{
+		ID:        newJobID("ipmi-fru-write"),
+		Name:      fmt.Sprintf("IPMI FRU Write (%d field(s))", len(req.Changes)),
+		Target:    "ipmi-fru-write",
+		Priority:  defaultTaskPriority("ipmi-fru-write", taskParams{}),
+		Status:    TaskPending,
+		CreatedAt: time.Now(),
+		params:    taskParams{FRUChanges: req.Changes},
+	}
+	globalQueue.enqueue(t)
+	writeJSON(w, map[string]string{"task_id": t.ID})
+}
+
+func runIPMIFRUWriteTask(ctx context.Context, j *jobState, exportDir string, p taskParams) error {
+	// Backup current FRU state
+	backupDir := filepath.Join(exportDir, "fru-backups")
+	if err := os.MkdirAll(backupDir, 0755); err != nil {
+		return fmt.Errorf("mkdir fru-backups: %w", err)
+	}
+	stamp := time.Now().Format("20060102150405")
+	backupPath := filepath.Join(backupDir, "fru-"+stamp+".txt")
+
+	backupOut, err := exec.CommandContext(ctx, "ipmitool", "fru", "print", "0").CombinedOutput()
+	if err != nil {
+		return fmt.Errorf("backup fru print: %w", err)
+	}
+	if err := os.WriteFile(backupPath, backupOut, 0644); err != nil {
+		return fmt.Errorf("write backup: %w", err)
+	}
+	j.append("Backup saved to " + backupPath)
+
+	// Apply changes
+	for _, c := range p.FRUChanges {
+		j.append(fmt.Sprintf("Setting %s (%s %d) = %q", c.Name, c.Area, c.Index, c.Value))
+		cmd := exec.CommandContext(ctx, "ipmitool", "fru", "edit", "0", "field", c.Area, fmt.Sprintf("%d", c.Index), c.Value)
+		if err := streamCmdJob(j, cmd); err != nil {
+			return fmt.Errorf("fru edit %s %d: %w", c.Area, c.Index, err)
+		}
+	}
+	return nil
+}
+
+func renderIPMIFRUCard() string {
+	return `<div class="card"><div class="card-head card-head-actions">IPMI &#8212; FRU<div class="card-head-buttons"><button class="btn btn-sm btn-secondary" onclick="fruRead()">Read</button></div></div><div class="card-body">
+<p style="font-size:13px;color:var(--muted);margin-bottom:12px">Reads and edits FRU fields via ipmitool (In-Band, device 0). Works on any server with IPMI support.</p>
+<div id="fru-status" style="font-size:13px;color:var(--muted);margin-bottom:8px"></div>
+<div id="fru-table"></div>
+<div id="fru-save-row" style="display:none;margin-top:12px">
+  <button class="btn btn-primary" id="fru-save-btn" onclick="fruSave()">Save</button>
+  <span id="fru-save-msg" style="font-size:13px;color:var(--muted);margin-left:10px"></span>
+</div>
+</div></div>
+<script>
+var fruOriginal = {};
+function fruRead() {
+  document.getElementById('fru-status').textContent = 'Reading...';
+  document.getElementById('fru-table').innerHTML = '';
+  document.getElementById('fru-save-row').style.display = 'none';
+  fetch('/api/tools/ipmi-fru', {cache:'no-store'})
+    .then(function(r) {
+      if (!r.ok) return r.json().then(function(e) { throw new Error(e.error || r.statusText); });
+      return r.json();
+    })
+    .then(function(fields) {
+      fruOriginal = {};
+      if (!fields || !fields.length) {
+        document.getElementById('fru-status').textContent = 'No FRU fields returned.';
+        return;
+      }
+      document.getElementById('fru-status').textContent = '';
+      var rows = fields.map(function(f) {
+        var val = f.value || '';
+        if (f.editable) {
+          fruOriginal[f.area + '_' + f.index] = val;
+          return '<tr><td style="color:var(--muted);white-space:nowrap;padding-right:16px">' + escHtml(f.name) + '</td>'
+            + '<td><input class="fru-input" style="width:100%;padding:4px 6px;border:1px solid var(--border);border-radius:3px;font-size:13px;font-family:inherit;background:var(--surface);color:var(--ink)"'
+            + ' data-area="' + escHtml(f.area) + '" data-index="' + f.index + '" data-name="' + escHtml(f.name) + '"'
+            + ' data-original="' + escHtml(val) + '" value="' + escHtml(val) + '" oninput="fruDirtyCheck()"></td></tr>';
+        }
+        return '<tr><td style="color:var(--muted);white-space:nowrap;padding-right:16px">' + escHtml(f.name) + '</td>'
+          + '<td style="color:var(--ink)">' + escHtml(val || '—') + '</td></tr>';
+      }).join('');
+      document.getElementById('fru-table').innerHTML = '<table style="width:100%">' + rows + '</table>';
+      fruDirtyCheck();
+    })
+    .catch(function(e) {
+      document.getElementById('fru-status').textContent = 'Error: ' + e.message;
+      document.getElementById('fru-status').style.color = 'var(--crit-fg)';
+    });
+}
+function escHtml(s) {
+  return String(s).replace(/&/g,'&amp;').replace(/</g,'&lt;').replace(/>/g,'&gt;').replace(/"/g,'&quot;');
+}
+function fruDirtyCheck() {
+  var inputs = document.querySelectorAll('.fru-input');
+  var changed = 0;
+  inputs.forEach(function(el) { if (el.value !== el.dataset.original) changed++; });
+  var row = document.getElementById('fru-save-row');
+  var btn = document.getElementById('fru-save-btn');
+  if (changed > 0) {
+    row.style.display = '';
+    btn.textContent = 'Save (' + changed + ' changed)';
+  } else {
+    row.style.display = 'none';
+  }
+}
+function fruSave() {
+  var inputs = document.querySelectorAll('.fru-input');
+  var changes = [];
+  inputs.forEach(function(el) {
+    if (el.value !== el.dataset.original) {
+      changes.push({area: el.dataset.area, index: parseInt(el.dataset.index, 10), name: el.dataset.name, value: el.value});
+    }
+  });
+  if (!changes.length) return;
+  document.getElementById('fru-save-btn').disabled = true;
+  document.getElementById('fru-save-msg').textContent = 'Saving...';
+  fetch('/api/tools/ipmi-fru/write', {method:'POST', headers:{'Content-Type':'application/json'}, body: JSON.stringify({changes: changes})})
+    .then(function(r) {
+      if (!r.ok) return r.json().then(function(e) { throw new Error(e.error || r.statusText); });
+      return r.json();
+    })
+    .then(function(d) {
+      var taskId = d.task_id;
+      document.getElementById('fru-save-msg').textContent = 'Task ' + taskId + ' queued…';
+      var poll = setInterval(function() {
+        fetch('/api/tasks', {cache:'no-store'}).then(function(r) { return r.json(); }).then(function(tasks) {
+          var t = Array.isArray(tasks) ? tasks.find(function(x) { return x.id === taskId; }) : null;
+          if (!t) return;
+          if (t.status === 'done') {
+            clearInterval(poll);
+            document.getElementById('fru-save-msg').textContent = 'Done — backup saved to fru-backups/.';
+            document.getElementById('fru-save-btn').disabled = false;
+            inputs.forEach(function(el) { el.dataset.original = el.value; });
+            fruDirtyCheck();
+          } else if (t.status === 'failed') {
+            clearInterval(poll);
+            document.getElementById('fru-save-msg').textContent = 'Failed: ' + (t.error || 'unknown error');
+            document.getElementById('fru-save-btn').disabled = false;
+          }
+        });
+      }, 1500);
+    })
+    .catch(function(e) {
+      document.getElementById('fru-save-msg').textContent = 'Error: ' + e.message;
+      document.getElementById('fru-save-btn').disabled = false;
+    });
+}
+</script>`
+}

audit/internal/webui/layout.go

@@ -68,10 +68,9 @@ tbody tr:hover td{background:rgba(0,0,0,.03)}
 .chip-warn{background:var(--warn-bg);color:var(--warn-fg);border:1px solid #c9ba9b}
 .chip-fail{background:var(--crit-bg);color:var(--crit-fg);border:1px solid var(--crit-border)}
 .chip-unknown{background:var(--surface-2);color:var(--muted);border:1px solid var(--border)}
-/* Tasks nav badge */
-.tasks-nav-btn{display:flex;justify-content:space-between;align-items:center;padding:10px 16px;color:rgba(255,255,255,.55);font-size:12px;text-decoration:none;border-top:1px solid rgba(255,255,255,.12);margin-top:auto;transition:color .15s}
-.tasks-nav-btn:hover{color:#fff}
-.tasks-nav-count{background:var(--accent);color:#fff;border-radius:10px;padding:1px 7px;font-size:11px;font-weight:700;display:none}
+/* Nav separator and tasks count badge */
+.nav-sep{height:1px;background:rgba(255,255,255,.12);margin:6px 0}
+.tasks-nav-count{background:var(--accent);color:#fff;border-radius:10px;padding:1px 7px;font-size:11px;font-weight:700;display:none;margin-left:auto}
 .tasks-nav-count.active{display:inline}
 /* Output terminal */
 .terminal{background:#1b1c1d;border:1px solid rgba(0,0,0,.2);border-radius:4px;padding:14px;font-family:monospace;font-size:12px;color:#b5cea8;max-height:400px;overflow-y:auto;white-space:pre-wrap;word-break:break-all;user-select:text;-webkit-user-select:text}
@@ -98,15 +97,21 @@ tbody tr:hover td{background:rgba(0,0,0,.03)}
 }
 
 func layoutNav(active string, buildLabel string) string {
-	items := []struct{ id, label, href string }{
-		{"dashboard", "Dashboard", "/"},
-		{"audit", "1. Audit", "/audit"},
-		{"check", "2. Check", "/check"},
-		{"load", "3. Load", "/load"},
-		{"speed", "4. Speed", "/speed"},
-		{"endurance", "5. Endurance", "/endurance"},
-		{"tools", "6. Tools", "/tools"},
-		{"settings", "7. Settings", "/settings"},
+	type navItem struct {
+		id, label, href string
+		sep              bool
+	}
+	items := []navItem{
+		{id: "dashboard", label: "Dashboard", href: "/"},
+		{id: "audit", label: "1. Audit", href: "/audit"},
+		{id: "check", label: "2. Check", href: "/check"},
+		{id: "load", label: "3. Load", href: "/load"},
+		{id: "burn", label: "4. Burn", href: "/burn"},
+		{id: "benchmark", label: "5. Benchmark", href: "/benchmark"},
+		{sep: true},
+		{id: "tasks", label: "Tasks", href: "/tasks"},
+		{id: "tools", label: "Tools", href: "/tools"},
+		{id: "settings", label: "Settings", href: "/settings"},
 	}
 	var b strings.Builder
 	b.WriteString(`<aside class="sidebar">`)
@@ -126,19 +131,23 @@ func layoutNav(active string, buildLabel string) string {
 	}
 	b.WriteString(`<nav class="nav">`)
 	for _, item := range items {
+		if item.sep {
+			b.WriteString(`<div class="nav-sep"></div>`)
+			continue
+		}
 		cls := "nav-item"
 		if item.id == active {
 			cls += " active"
 		}
-		b.WriteString(fmt.Sprintf(`<a class="%s" href="%s">%s</a>`, cls, item.href, item.label))
+		if item.id == "tasks" {
+			b.WriteString(fmt.Sprintf(`<a class="%s" href="%s" id="tasks-nav-item">%s<span class="tasks-nav-count" id="tasks-nav-count"></span></a>`, cls, item.href, item.label))
+		} else {
+			b.WriteString(fmt.Sprintf(`<a class="%s" href="%s">%s</a>`, cls, item.href, item.label))
+		}
 	}
 	b.WriteString(`</nav>`)
-	b.WriteString(`<a href="/tasks" class="tasks-nav-btn" id="tasks-nav-btn">`)
-	b.WriteString(`<span>Tasks</span>`)
-	b.WriteString(`<span class="tasks-nav-count" id="tasks-nav-count"></span>`)
-	b.WriteString(`</a>`)
 	b.WriteString(`<script>`)
-	b.WriteString(`(function(){function u(){fetch('/api/tasks',{cache:'no-store'}).then(function(r){return r.json();}).then(function(d){var n=Array.isArray(d)?d.filter(function(t){return t.status==='pending'||t.status==='running';}).length:0;var c=document.getElementById('tasks-nav-count');var b=document.getElementById('tasks-nav-btn');if(c){c.textContent=n>0?String(n):'';c.className='tasks-nav-count'+(n>0?' active':'');}if(b){b.style.color=n>0?'#f6c90e':'';}}).catch(function(){});}u();setInterval(u,5000);})();`)
+	b.WriteString(`(function(){function u(){fetch('/api/tasks',{cache:'no-store'}).then(function(r){return r.json();}).then(function(d){var n=Array.isArray(d)?d.filter(function(t){return t.status==='pending'||t.status==='running';}).length:0;var c=document.getElementById('tasks-nav-count');var el=document.getElementById('tasks-nav-item');if(c){c.textContent=n>0?String(n):'';c.className='tasks-nav-count'+(n>0?' active':'');}if(el){el.style.color=n>0?'#f6c90e':'';}}).catch(function(){});}u();setInterval(u,5000);})();`)
 	b.WriteString(`</script>`)
 	b.WriteString(`</aside>`)
 	return b.String()

audit/internal/webui/page_benchmark.go

@@ -612,19 +612,6 @@ func renderPowerBenchmarkResultsCard(exportDir string) string {
 	return b.String()
 }
 
-// renderSpeed renders the Speed page (step 4): performance benchmarks.
-// Uses the same benchmark infrastructure; defaults to Standard profile (throughput/bandwidth).
-// For long-duration stability/overnight runs, see Endurance (step 5).
-func renderSpeed(opts HandlerOptions) string {
-	base := renderBenchmark(opts)
-	return `<div class="alert alert-info" style="margin-bottom:16px"><strong>Speed:</strong> Measures GPU compute throughput and memory bandwidth. For overnight stability testing, go to <a href="/endurance">5. Endurance</a>.</div>` + base
-}
-
-// renderEndurance renders the Endurance page (step 5): long-duration reliability tests.
-// Focuses on Stability and Overnight profiles for multi-hour burn validation.
-// For short load tests, see Load (step 3). For throughput measurement, see Speed (step 4).
-func renderEndurance(opts HandlerOptions) string {
-	base := renderBenchmark(opts)
-	return `<div class="alert alert-warn" style="margin-bottom:16px"><strong>Endurance:</strong> Long-duration reliability tests — Stability (several hours) and Overnight (8+ h) profiles. These profiles run hardware at sustained load; results show whether the server holds its performance envelope over time.</div>
-<div class="alert alert-info" style="margin-bottom:16px">Use the <strong>Stability</strong> or <strong>Overnight</strong> profile in the setup card below. The Standard profile is available too but is better suited for the <a href="/speed">4. Speed</a> page.</div>` + base
-}
+// renderSpeed and renderEndurance are legacy wrappers; canonical page is 5. Benchmark at /benchmark.
+func renderSpeed(opts HandlerOptions) string    { return renderBenchmark(opts) }
+func renderEndurance(opts HandlerOptions) string { return renderBenchmark(opts) }

audit/internal/webui/page_burn.go

@@ -1,13 +1,8 @@
 package webui
 
-// renderLoad renders the Load page (step 3): sustained stress tests.
-// For non-destructive status checks, see Check (step 2).
-// For DCGM targeted diagnostics (targeted_stress, targeted_power, pulse), see Check → Validate mode.
-func renderLoad() string { return renderBurn() }
-
 func renderBurn() string {
 	return `<div class="alert alert-warn" style="margin-bottom:16px"><strong>&#9888; Warning:</strong> Stress tests on this page run hardware at high load. Repeated or prolonged use may reduce hardware lifespan. Use only when necessary.</div>
-<div class="alert alert-info" style="margin-bottom:16px"><strong>Scope:</strong> Load runs sustained GPU compute and CPU/memory stress recipes. DCGM diagnostics (<code>targeted_stress</code>, <code>targeted_power</code>, <code>pulse_test</code>) and NCCL/NVBandwidth are on the <a href="/check">2. Check</a> page. For overnight endurance runs, see <a href="/endurance">5. Endurance</a>.</div>
+<div class="alert alert-info" style="margin-bottom:16px"><strong>Scope:</strong> Burn runs sustained GPU compute and CPU/memory stress recipes. DCGM targeted diagnostics (<code>targeted_stress</code>, <code>targeted_power</code>, <code>pulse_test</code>) and NCCL/NVBandwidth are on the <a href="/load">3. Load</a> page. For performance benchmarks, see <a href="/benchmark">5. Benchmark</a>.</div>
 <p style="color:var(--muted);font-size:13px;margin-bottom:16px">Tasks continue in the background — view progress in <a href="/tasks">Tasks</a>.</p>
 
 <div class="card" style="margin-bottom:16px">

audit/internal/webui/page_export_tools.go

@@ -404,7 +404,11 @@ loadNvidiaSelfHeal();
 func renderTools() string {
 	return renderNVMeFormatCard() + `
 
-` + renderSAADMICard()
+` + renderSAADMICard() + `
+
+` + renderIPMIFRUCard() + `
+
+` + renderRAIDMgmtCard()
 }
 
 func renderExportIndex(exportDir string) (string, error) {

audit/internal/webui/page_settings.go

@@ -76,18 +76,6 @@ checkTools();
 <div class="card"><div class="card-head">Services</div><div class="card-body">` +
 		renderServicesInline() + `</div></div>
 
-<div class="card">
-  <div class="card-head">Blackbox Logging</div>
-  <div class="card-body">
-    <p style="font-size:13px;color:var(--muted);margin-bottom:14px">Continuous hardware monitoring that writes a rolling log of sensor readings to the export directory.</p>
-    <div style="display:flex;gap:8px;align-items:center">
-      <button class="btn btn-primary btn-sm" onclick="blackboxToggle('enable')">Enable</button>
-      <button class="btn btn-secondary btn-sm" onclick="blackboxToggle('disable')">Disable</button>
-      <span id="blackbox-status" style="font-size:12px;color:var(--muted)">Loading...</span>
-    </div>
-  </div>
-</div>
-
 <div class="card">
   <div class="card-head">Build Info</div>
   <div class="card-body">
@@ -100,23 +88,28 @@ checkTools();
   </div>
 </div>
 
+<div class="card">
+  <div class="card-head">Power</div>
+  <div class="card-body">
+    <div style="display:flex;gap:8px;align-items:center">
+      <button class="btn btn-secondary btn-sm" onclick="systemPower('reboot')">Reboot</button>
+      <button class="btn btn-secondary btn-sm" onclick="systemPower('shutdown')">Shutdown</button>
+      <span id="power-status" style="font-size:12px;color:var(--muted)"></span>
+    </div>
+  </div>
+</div>
+
 <script>
-(function() {
-  fetch('/api/blackbox/status', {cache:'no-store'}).then(r => r.json()).then(d => {
-    var el = document.getElementById('blackbox-status');
-    if (el) el.textContent = d.enabled ? 'Enabled' : 'Disabled';
-  }).catch(() => {
-    var el = document.getElementById('blackbox-status');
-    if (el) el.textContent = 'Status unavailable';
-  });
-})();
-function blackboxToggle(action) {
-  var el = document.getElementById('blackbox-status');
-  if (el) el.textContent = 'Updating...';
-  fetch('/api/blackbox/' + action, {method:'POST', cache:'no-store'})
-    .then(r => r.json())
-    .then(d => { if (el) el.textContent = d.enabled ? 'Enabled' : 'Disabled'; })
-    .catch(err => { if (el) el.textContent = 'Error: ' + err.message; });
+function systemPower(action) {
+  var label = action === 'reboot' ? 'reboot' : 'shut down';
+  if (!confirm('Are you sure you want to ' + label + ' the server?')) return;
+  var el = document.getElementById('power-status');
+  if (el) el.textContent = action === 'reboot' ? 'Rebooting...' : 'Shutting down...';
+  fetch('/api/system/' + action, {method: 'POST'})
+    .then(function(r) { return r.json(); })
+    .catch(function(e) { if (el) el.textContent = 'Error: ' + e.message; });
 }
-</script>`
+</script>
+
+`
 }

audit/internal/webui/page_validate.go

@@ -68,6 +68,14 @@ func validateTotalStressSec(n int) int {
 }
 
 func renderValidate(opts HandlerOptions) string {
+	return renderValidateMode(opts, false)
+}
+
+func renderValidateStress(opts HandlerOptions) string {
+	return renderValidateMode(opts, true)
+}
+
+func renderValidateMode(opts HandlerOptions, stressDefault bool) string {
 	inv := loadValidateInventory(opts)
 	n := inv.NvidiaGPUCount
 	validateTotalStr := validateFmtDur(validateTotalValidateSec(n))
@@ -76,26 +84,49 @@ func renderValidate(opts HandlerOptions) string {
 	if n > 0 {
 		gpuNote = fmt.Sprintf(" (%d GPU)", n)
 	}
-	return `<div class="alert alert-info" style="margin-bottom:16px"><strong>Non-destructive:</strong> Validate tests collect diagnostics only. They do not write to disks, do not run sustained load, and do not increment hardware wear counters.</div>
-<p style="color:var(--muted);font-size:13px;margin-bottom:16px">Tasks continue in the background — view progress in <a href="/tasks">Tasks</a>.</p>
+	estStr := validateTotalStr
+	if stressDefault {
+		estStr = stressTotalStr
+	}
+	alert := `<div class="alert alert-info" style="margin-bottom:16px"><strong>Non-destructive:</strong> Validate tests collect diagnostics only. They do not write to disks, do not run sustained load, and do not increment hardware wear counters.</div>`
+	if stressDefault {
+		alert = `<div class="alert alert-warn" style="margin-bottom:16px"><strong>&#9888; Stress mode:</strong> Runs extended load tests — CPU stress-ng, memory passes, DCGM targeted diagnostics. Higher wear than Validate.</div>`
+	}
 
-	<div class="card" style="margin-bottom:16px">
-	  <div class="card-head">Validate Profile</div>
-	  <div class="card-body validate-profile-body">
-	    <div class="validate-profile-col">
-	      <div class="form-row" style="margin:12px 0 0"><label>Mode</label></div>
-	      <label class="cb-row"><input type="radio" name="sat-mode" id="sat-mode-validate" value="validate" checked onchange="satModeChanged()"><span>Validate — quick non-destructive check</span></label>
-	      <label class="cb-row"><input type="radio" name="sat-mode" id="sat-mode-stress" value="stress" onchange="satModeChanged()"><span>Stress — thorough load test (` + stressTotalStr + gpuNote + `)</span></label>
-	    </div>
-	    <div class="validate-profile-col validate-profile-action">
-	      <p style="color:var(--muted);font-size:12px;margin:0 0 10px">Runs validate modules sequentially. Validate: ` + validateTotalStr + gpuNote + `; Stress: ` + stressTotalStr + gpuNote + `. Estimates are based on real log data and scale with GPU count.</p>
-	      <button type="button" class="btn btn-primary" onclick="runAllSAT()">Validate one by one</button>
-	      <div style="margin-top:12px">
-	        <span id="sat-all-status" style="font-size:12px;color:var(--muted)"></span>
-	      </div>
-	    </div>
-	  </div>
-	</div>
+	stressOnlyCards := ""
+	if stressDefault {
+		stressOnlyCards = renderSATCard("nvidia-targeted-stress", "NVIDIA GPU Targeted Stress", "runNvidiaValidateSet('nvidia-targeted-stress')", "", renderValidateCardBody(
+			inv.NVIDIA,
+			`Runs a controlled NVIDIA DCGM load to check stability under moderate stress.`,
+			`<code>dcgmi diag targeted_stress</code>`,
+			validateFmtDur(platform.SATEstimatedNvidiaTargetedStressSec)+` (all GPUs simultaneously).`,
+		)) +
+			renderSATCard("nvidia-targeted-power", "NVIDIA Targeted Power", "runNvidiaValidateSet('nvidia-targeted-power')", "", renderValidateCardBody(
+				inv.NVIDIA,
+				`Checks that the GPU can sustain its declared power delivery envelope. Pass/fail determined by DCGM.`,
+				`<code>dcgmi diag targeted_power</code>`,
+				validateFmtDur(platform.SATEstimatedNvidiaTargetedPowerSec)+` (all GPUs simultaneously).`,
+			)) +
+			renderSATCard("nvidia-pulse", "NVIDIA PSU Pulse Test", "runNvidiaFabricValidate('nvidia-pulse')", "", renderValidateCardBody(
+				inv.NVIDIA,
+				`Tests power supply transient response by pulsing all GPUs simultaneously between idle and full load. Synchronous pulses across all GPUs create worst-case PSU load spikes — running per-GPU would miss PSU-level failures.`,
+				`<code>dcgmi diag pulse_test</code>`,
+				validateFmtDur(platform.SATEstimatedNvidiaPulseTestSec)+` (all GPUs simultaneously; measured on 8-GPU system).`,
+			))
+	}
+
+	satStressModeJS := "function satStressMode() { return false; }"
+	if stressDefault {
+		satStressModeJS = "function satStressMode() { return true; }"
+	}
+
+	return alert + `
+<p style="color:var(--muted);font-size:13px;margin-bottom:16px">Tasks continue in the background — view progress in <a href="/tasks">Tasks</a>.</p>
+<div style="display:flex;align-items:center;gap:12px;margin-bottom:16px">
+  <button type="button" class="btn btn-primary" onclick="runAllSAT()">Run All</button>
+  <span id="sat-all-status" style="font-size:12px;color:var(--muted)"></span>
+  <span style="font-size:12px;color:var(--muted)">est. ` + estStr + gpuNote + `</span>
+</div>
 
 <div class="grid3">
 ` + renderSATCard("cpu", "CPU", "runSAT('cpu')", "", renderValidateCardBody(
@@ -122,7 +153,7 @@ func renderValidate(opts HandlerOptions) string {
   <div class="card-head">NVIDIA GPU Selection</div>
   <div class="card-body">
     <p style="font-size:12px;color:var(--muted);margin:0 0 8px">` + inv.NVIDIA + `</p>
-    <p style="font-size:12px;color:var(--muted);margin:0 0 10px">All NVIDIA validate tasks use only the GPUs selected here. The same selection is used by Validate one by one.</p>
+    <p style="font-size:12px;color:var(--muted);margin:0 0 10px">All NVIDIA validate tasks use only the GPUs selected here. The same selection is used by Run All.</p>
     <div style="display:flex;gap:8px;flex-wrap:wrap;margin-bottom:8px">
       <button class="btn btn-sm btn-secondary" type="button" onclick="satSelectAllGPUs()">Select All</button>
       <button class="btn btn-sm btn-secondary" type="button" onclick="satSelectNoGPUs()">Clear</button>
@@ -143,46 +174,19 @@ func renderValidate(opts HandlerOptions) string {
 			validateFmtDur(platform.SATEstimatedNvidiaGPUValidateSec),
 			validateFmtDur(platform.SATEstimatedNvidiaGPUStressSec)),
 	)) +
-		`<div id="sat-card-nvidia-targeted-stress">` +
-		renderSATCard("nvidia-targeted-stress", "NVIDIA GPU Targeted Stress", "runNvidiaValidateSet('nvidia-targeted-stress')", "", renderValidateCardBody(
-			inv.NVIDIA,
-			`Runs a controlled NVIDIA DCGM load to check stability under moderate stress.`,
-			`<code>dcgmi diag targeted_stress</code>`,
-		"Skipped in Validate. Stress: " + validateFmtDur(platform.SATEstimatedNvidiaTargetedStressSec) + ` (all GPUs simultaneously).<p id="sat-ts-mode-hint" style="color:var(--warn-fg);font-size:12px;margin:8px 0 0">Only runs in Stress mode. Switch mode above to enable in Run All.</p>`,
-		)) +
-		`</div>` +
-		`<div id="sat-card-nvidia-targeted-power">` +
-		renderSATCard("nvidia-targeted-power", "NVIDIA Targeted Power", "runNvidiaValidateSet('nvidia-targeted-power')", "", renderValidateCardBody(
-			inv.NVIDIA,
-			`Checks that the GPU can sustain its declared power delivery envelope. Pass/fail determined by DCGM.`,
-			`<code>dcgmi diag targeted_power</code>`,
-		"Skipped in Validate. Stress: " + validateFmtDur(platform.SATEstimatedNvidiaTargetedPowerSec) + ` (all GPUs simultaneously).<p id="sat-tp-mode-hint" style="color:var(--warn-fg);font-size:12px;margin:8px 0 0">Only runs in Stress mode. Switch mode above to enable in Run All.</p>`,
-		)) +
-		`</div>` +
-		`<div id="sat-card-nvidia-pulse">` +
-		renderSATCard("nvidia-pulse", "NVIDIA PSU Pulse Test", "runNvidiaFabricValidate('nvidia-pulse')", "", renderValidateCardBody(
-			inv.NVIDIA,
-			`Tests power supply transient response by pulsing all GPUs simultaneously between idle and full load. Synchronous pulses across all GPUs create worst-case PSU load spikes — running per-GPU would miss PSU-level failures.`,
-			`<code>dcgmi diag pulse_test</code>`,
-			`Skipped in Validate. Stress: `+validateFmtDur(platform.SATEstimatedNvidiaPulseTestSec)+` (all GPUs simultaneously; measured on 8-GPU system).`+`<p id="sat-pt-mode-hint" style="color:var(--warn-fg);font-size:12px;margin:8px 0 0">Only runs in Stress mode. Switch mode above to enable in Run All.</p>`,
-		)) +
-		`</div>` +
-		`<div id="sat-card-nvidia-interconnect">` +
+		stressOnlyCards +
 		renderSATCard("nvidia-interconnect", "NVIDIA Interconnect (NCCL)", "runNvidiaFabricValidate('nvidia-interconnect')", "", renderValidateCardBody(
 			inv.NVIDIA,
 			`Verifies NVLink/NVSwitch fabric bandwidth using NCCL all_reduce_perf across all selected GPUs. Pass/fail based on achieved bandwidth vs. theoretical.`,
 			`<code>all_reduce_perf</code> (NCCL tests)`,
-			`Validate and Stress: `+validateFmtDur(platform.SATEstimatedNvidiaInterconnectSec)+` (all GPUs simultaneously, requires ≥2).`,
+			validateFmtDur(platform.SATEstimatedNvidiaInterconnectSec)+` (all GPUs simultaneously, requires ≥2).`,
 		)) +
-		`</div>` +
-		`<div id="sat-card-nvidia-bandwidth">` +
 		renderSATCard("nvidia-bandwidth", "NVIDIA Bandwidth (NVBandwidth)", "runNvidiaFabricValidate('nvidia-bandwidth')", "", renderValidateCardBody(
 			inv.NVIDIA,
 			`Validates GPU memory copy and peer-to-peer bandwidth paths using NVBandwidth.`,
 			`<code>nvbandwidth</code>`,
-			`Validate and Stress: `+validateFmtDur(platform.SATEstimatedNvidiaBandwidthSec)+` (all GPUs simultaneously; nvbandwidth runs all built-in tests without a time limit — duration set by the tool).`,
+			validateFmtDur(platform.SATEstimatedNvidiaBandwidthSec)+` (all GPUs simultaneously; nvbandwidth runs all built-in tests without a time limit — duration set by the tool).`,
 		)) +
-		`</div>` +
 		`</div>
 <div class="grid3" style="margin-top:16px">
 ` + renderSATCard("amd", "AMD GPU", "runAMDValidateSet()", "", renderValidateCardBody(
@@ -197,36 +201,15 @@ func renderValidate(opts HandlerOptions) string {
   <div class="card-body"><div id="sat-terminal" class="terminal"></div></div>
 </div>
 <style>
-.validate-profile-body { display:grid; grid-template-columns:1fr 1fr 1fr; gap:24px; align-items:stretch; }
-.validate-profile-col { min-width:0; display:flex; flex-direction:column; }
-.validate-profile-action { display:flex; flex-direction:column; align-items:center; justify-content:center; }
 .validate-card-body { padding:0; }
 .validate-card-section { padding:12px 16px 0; }
 .validate-card-section:last-child { padding-bottom:16px; }
 .sat-gpu-row { display:flex; align-items:flex-start; gap:8px; padding:6px 0; cursor:pointer; font-size:13px; }
 .sat-gpu-row input[type=checkbox] { width:16px; height:16px; margin-top:2px; flex-shrink:0; }
-@media(max-width:900px){ .validate-profile-body { grid-template-columns:1fr; } }
 </style>
 <script>
 let satES = null;
-function satStressMode() {
-  return document.querySelector('input[name="sat-mode"]:checked')?.value === 'stress';
-}
-function satModeChanged() {
-  const stress = satStressMode();
-  [
-    {card: 'sat-card-nvidia-targeted-stress', hint: 'sat-ts-mode-hint'},
-    {card: 'sat-card-nvidia-targeted-power',  hint: 'sat-tp-mode-hint'},
-    {card: 'sat-card-nvidia-pulse',           hint: 'sat-pt-mode-hint'},
-  ].forEach(function(item) {
-    const card = document.getElementById(item.card);
-    if (card) {
-      card.style.opacity = stress ? '1' : '0.5';
-      const hint = document.getElementById(item.hint);
-      if (hint) hint.style.display = stress ? 'none' : '';
-    }
-  });
-}
+` + satStressModeJS + `
 function satLabels() {
   return {nvidia:'Validate GPU', 'nvidia-targeted-stress':'NVIDIA Targeted Stress (dcgmi diag targeted_stress)', 'nvidia-targeted-power':'NVIDIA Targeted Power (dcgmi diag targeted_power)', 'nvidia-pulse':'NVIDIA PSU Pulse Test (dcgmi diag pulse_test)', 'nvidia-interconnect':'NVIDIA Interconnect (NCCL all_reduce_perf)', 'nvidia-bandwidth':'NVIDIA Bandwidth (NVBandwidth)', memory:'Validate Memory', storage:'Validate Storage', cpu:'Validate CPU', amd:'Validate AMD GPU', 'amd-mem':'AMD GPU MEM Integrity', 'amd-bandwidth':'AMD GPU MEM Bandwidth'};
 }
@@ -667,7 +650,7 @@ func renderCheck(opts HandlerOptions) string {
 	if n > 0 {
 		gpuNote = fmt.Sprintf(" (%d GPU)", n)
 	}
-	return `<div class="alert alert-info" style="margin-bottom:16px"><strong>Non-destructive:</strong> Check tests collect diagnostics only — no writes to disks, no sustained load, no hardware wear counters incremented. For stress testing, go to <a href="/load">3. Load</a>.</div>
+	return `<div class="alert alert-info" style="margin-bottom:16px"><strong>Non-destructive:</strong> Check tests collect diagnostics only — no writes to disks, no sustained load, no hardware wear counters incremented. For stress testing, go to <a href="/burn">4. Burn</a>.</div>
 <div style="display:flex;align-items:center;gap:12px;margin-bottom:16px">
   <button type="button" class="btn btn-primary" onclick="runAllCheckSAT()">Run All Checks</button>
   <span id="sat-all-status" style="font-size:12px;color:var(--muted)"></span>

audit/internal/webui/pages.go

@@ -33,36 +33,36 @@ func renderPage(page string, opts HandlerOptions) string {
 	case "load":
 		pageID = "load"
 		title = "3. Load"
-		body = renderLoad()
-	case "speed":
-		pageID = "speed"
-		title = "4. Speed"
-		body = renderSpeed(opts)
-	case "endurance":
-		pageID = "endurance"
-		title = "5. Endurance"
-		body = renderEndurance(opts)
+		body = renderValidateStress(opts)
+	case "burn":
+		pageID = "burn"
+		title = "4. Burn"
+		body = renderBurn()
+	case "benchmark":
+		pageID = "benchmark"
+		title = "5. Benchmark"
+		body = renderBenchmark(opts)
 	case "tools":
 		pageID = "tools"
-		title = "6. Tools"
+		title = "Tools"
 		body = renderTools()
 	case "settings":
 		pageID = "settings"
-		title = "7. Settings"
+		title = "Settings"
 		body = renderSettings(opts)
 	// Legacy routes (redirected at HTTP level in handlePage; these are fallbacks)
 	case "validate", "tests":
-		pageID = "check"
-		title = "2. Check"
-		body = renderCheck(opts)
-	case "burn", "burn-in":
 		pageID = "load"
 		title = "3. Load"
-		body = renderLoad()
-	case "benchmark":
-		pageID = "speed"
-		title = "4. Speed"
-		body = renderSpeed(opts)
+		body = renderValidate(opts)
+	case "burn-in":
+		pageID = "burn"
+		title = "4. Burn"
+		body = renderBurn()
+	case "speed", "endurance":
+		pageID = "benchmark"
+		title = "5. Benchmark"
+		body = renderBenchmark(opts)
 	case "tasks":
 		pageID = "tasks"
 		title = "Tasks"

audit/internal/webui/raid_mgmt.go

@@ -0,0 +1,689 @@
+package webui
+
+import (
+	"context"
+	"encoding/json"
+	"fmt"
+	"net/http"
+	"os"
+	"os/exec"
+	"regexp"
+	"strconv"
+	"strings"
+	"time"
+)
+
+// --- Response types ---
+
+type raidDriveInfo struct {
+	Slot   string  `json:"slot,omitempty"`
+	Device string  `json:"device,omitempty"`
+	Model  string  `json:"model,omitempty"`
+	SizeGB float64 `json:"size_gb,omitempty"`
+	Serial string  `json:"serial,omitempty"`
+	State  string  `json:"state,omitempty"`
+}
+
+type raidArrayInfo struct {
+	Name     string   `json:"name"`
+	Level    string   `json:"level,omitempty"`
+	Members  []string `json:"members"`
+	Degraded bool     `json:"degraded"`
+}
+
+type raidControllerInfo struct {
+	ID            string          `json:"id"`
+	Type          string          `json:"type"`
+	Index         int             `json:"index"`
+	Model         string          `json:"model"`
+	ForeignDrives []raidDriveInfo `json:"foreign_drives"`
+	FreeDrives    []raidDriveInfo `json:"free_drives"`
+	Arrays        []raidArrayInfo `json:"arrays,omitempty"`
+}
+
+type raidStatusResp struct {
+	Controllers []raidControllerInfo `json:"controllers"`
+}
+
+// --- LSI/storcli detection ---
+
+func detectLSIControllers() []raidControllerInfo {
+	ctrlOut, err := exec.Command("storcli64", "/call", "show", "J").Output()
+	if err != nil {
+		return nil
+	}
+
+	var ctrlDoc struct {
+		Controllers []struct {
+			ResponseData struct {
+				Basics struct {
+					Controller int    `json:"Controller"`
+					Model      string `json:"Model"`
+				} `json:"Basics"`
+			} `json:"Response Data"`
+		} `json:"Controllers"`
+	}
+	if err := json.Unmarshal(ctrlOut, &ctrlDoc); err != nil || len(ctrlDoc.Controllers) == 0 {
+		return nil
+	}
+
+	driveOut, _ := exec.Command("storcli64", "/call/eall/sall", "show", "all", "J").Output()
+
+	var driveDoc struct {
+		Controllers []struct {
+			ResponseData struct {
+				DriveInformation []struct {
+					EIDSlt string `json:"EID:Slt"`
+					State  string `json:"State"`
+					Size   string `json:"Size"`
+					Intf   string `json:"Intf"`
+					Med    string `json:"Med"`
+					Model  string `json:"Model"`
+					SN     string `json:"SN"`
+				} `json:"Drive Information"`
+			} `json:"Response Data"`
+		} `json:"Controllers"`
+	}
+	if len(driveOut) > 0 {
+		json.Unmarshal(driveOut, &driveDoc) //nolint:errcheck
+	}
+
+	var controllers []raidControllerInfo
+	for i, c := range ctrlDoc.Controllers {
+		ctrl := raidControllerInfo{
+			ID:            fmt.Sprintf("lsi-%d", c.ResponseData.Basics.Controller),
+			Type:          "lsi",
+			Index:         c.ResponseData.Basics.Controller,
+			Model:         c.ResponseData.Basics.Model,
+			ForeignDrives: []raidDriveInfo{},
+			FreeDrives:    []raidDriveInfo{},
+		}
+		if ctrl.Model == "" {
+			ctrl.Model = fmt.Sprintf("LSI Controller %d", ctrl.Index)
+		}
+
+		if i < len(driveDoc.Controllers) {
+			for _, d := range driveDoc.Controllers[i].ResponseData.DriveInformation {
+				info := raidDriveInfo{
+					Slot:   strings.TrimSpace(d.EIDSlt),
+					Model:  strings.TrimSpace(d.Model),
+					State:  strings.TrimSpace(d.State),
+					SizeGB: raidParseHumanSizeGB(d.Size),
+					Serial: strings.TrimSpace(d.SN),
+				}
+				switch strings.TrimSpace(d.State) {
+				case "Frgn":
+					ctrl.ForeignDrives = append(ctrl.ForeignDrives, info)
+				case "UGood", "JBOD":
+					ctrl.FreeDrives = append(ctrl.FreeDrives, info)
+				}
+			}
+		}
+
+		controllers = append(controllers, ctrl)
+	}
+	return controllers
+}
+
+// --- VROC/mdadm detection ---
+
+var raidMDStatDegradedRx = regexp.MustCompile(`\[[U_]+\]`)
+
+type mdStatEntry struct {
+	Name     string
+	Level    string
+	Members  []string
+	Degraded bool
+}
+
+func parseRAIDMDStat(raw string) []mdStatEntry {
+	var entries []mdStatEntry
+	var cur *mdStatEntry
+	for _, line := range strings.Split(raw, "\n") {
+		if strings.HasPrefix(line, "Personalities") || strings.HasPrefix(line, "unused devices") {
+			continue
+		}
+		if idx := strings.Index(line, " : "); idx > 0 {
+			name := strings.TrimSpace(line[:idx])
+			rest := line[idx+3:]
+			entry := mdStatEntry{Name: name}
+			for _, tok := range strings.Fields(rest) {
+				if strings.HasPrefix(tok, "raid") || strings.HasPrefix(tok, "linear") {
+					entry.Level = tok
+				}
+				if bk := strings.Index(tok, "["); bk > 0 && strings.HasSuffix(tok, "]") {
+					entry.Members = append(entry.Members, tok[:bk])
+				}
+			}
+			entries = append(entries, entry)
+			cur = &entries[len(entries)-1]
+			continue
+		}
+		if cur != nil {
+			if m := raidMDStatDegradedRx.FindString(line); m != "" && strings.Contains(m, "_") {
+				cur.Degraded = true
+			}
+		}
+	}
+	return entries
+}
+
+func detectVROCController() *raidControllerInfo {
+	out, err := exec.Command("mdadm", "--detail-platform").CombinedOutput()
+	if err != nil && len(out) == 0 {
+		return nil
+	}
+	hasVROC := false
+	for _, line := range strings.Split(string(out), "\n") {
+		lower := strings.ToLower(line)
+		if strings.Contains(lower, "license") || strings.Contains(lower, "intel") || strings.Contains(lower, "platform") {
+			hasVROC = true
+			break
+		}
+	}
+	if !hasVROC {
+		return nil
+	}
+
+	ctrl := &raidControllerInfo{
+		ID:            "vroc-0",
+		Type:          "vroc",
+		Model:         "Intel VROC",
+		ForeignDrives: []raidDriveInfo{},
+		FreeDrives:    []raidDriveInfo{},
+	}
+
+	inArray := map[string]bool{}
+	raw, err := os.ReadFile("/proc/mdstat")
+	if err == nil {
+		for _, arr := range parseRAIDMDStat(string(raw)) {
+			ctrl.Arrays = append(ctrl.Arrays, raidArrayInfo{
+				Name:     arr.Name,
+				Level:    arr.Level,
+				Members:  arr.Members,
+				Degraded: arr.Degraded,
+			})
+			for _, m := range arr.Members {
+				inArray[m] = true
+			}
+		}
+	}
+
+	lsblkOut, err := exec.Command("lsblk", "-J", "-d", "-o", "NAME,SIZE,TYPE,MODEL,SERIAL").Output()
+	if err == nil {
+		var lsblkDoc struct {
+			BlockDevices []struct {
+				Name   string `json:"name"`
+				Size   string `json:"size"`
+				Type   string `json:"type"`
+				Model  string `json:"model"`
+				Serial string `json:"serial"`
+			} `json:"blockdevices"`
+		}
+		if json.Unmarshal(lsblkOut, &lsblkDoc) == nil {
+			for _, d := range lsblkDoc.BlockDevices {
+				if d.Type != "disk" || inArray[d.Name] {
+					continue
+				}
+				ctrl.FreeDrives = append(ctrl.FreeDrives, raidDriveInfo{
+					Device: "/dev/" + d.Name,
+					Model:  strings.TrimSpace(d.Model),
+					Serial: strings.TrimSpace(d.Serial),
+					State:  "available",
+				})
+			}
+		}
+	}
+
+	return ctrl
+}
+
+// --- API handlers ---
+
+func (h *handler) handleAPIRAIDStatus(w http.ResponseWriter, r *http.Request) {
+	resp := raidStatusResp{Controllers: []raidControllerInfo{}}
+
+	if lsi := detectLSIControllers(); len(lsi) > 0 {
+		resp.Controllers = append(resp.Controllers, lsi...)
+	}
+	if vroc := detectVROCController(); vroc != nil {
+		resp.Controllers = append(resp.Controllers, *vroc)
+	}
+
+	writeJSON(w, resp)
+}
+
+func (h *handler) handleAPIRAIDForeignAction(w http.ResponseWriter, r *http.Request) {
+	var req struct {
+		ControllerID string `json:"controller_id"`
+		Action       string `json:"action"`
+	}
+	if err := json.NewDecoder(r.Body).Decode(&req); err != nil {
+		writeError(w, http.StatusBadRequest, "invalid JSON")
+		return
+	}
+	if req.Action != "import" && req.Action != "clear" {
+		writeError(w, http.StatusBadRequest, "action must be 'import' or 'clear'")
+		return
+	}
+	ctrlIdx, ok := parseLSIControllerIndex(req.ControllerID)
+	if !ok {
+		writeError(w, http.StatusBadRequest, "invalid controller_id")
+		return
+	}
+
+	target := "raid-foreign-clear"
+	name := fmt.Sprintf("RAID Foreign Clear (ctrl %d)", ctrlIdx)
+	if req.Action == "import" {
+		target = "raid-foreign-import"
+		name = fmt.Sprintf("RAID Foreign Import (ctrl %d)", ctrlIdx)
+	}
+
+	t := &Task{
+		ID:        newJobID(target),
+		Name:      name,
+		Target:    target,
+		Priority:  defaultTaskPriority(target, taskParams{}),
+		Status:    TaskPending,
+		CreatedAt: time.Now(),
+		params:    taskParams{RAIDController: ctrlIdx},
+	}
+	globalQueue.enqueue(t)
+	writeJSON(w, map[string]string{"task_id": t.ID})
+}
+
+func (h *handler) handleAPIRAIDCreateMirror(w http.ResponseWriter, r *http.Request) {
+	var req struct {
+		ControllerID string   `json:"controller_id"`
+		Devices      []string `json:"devices"`
+		ArrayName    string   `json:"array_name"`
+	}
+	if err := json.NewDecoder(r.Body).Decode(&req); err != nil {
+		writeError(w, http.StatusBadRequest, "invalid JSON")
+		return
+	}
+	if len(req.Devices) < 2 {
+		writeError(w, http.StatusBadRequest, "at least 2 devices required")
+		return
+	}
+
+	var target, name string
+	var params taskParams
+
+	switch {
+	case strings.HasPrefix(req.ControllerID, "lsi-"):
+		ctrlIdx, ok := parseLSIControllerIndex(req.ControllerID)
+		if !ok {
+			writeError(w, http.StatusBadRequest, "invalid controller_id")
+			return
+		}
+		target = "raid-lsi-create-mirror"
+		name = fmt.Sprintf("Create RAID 1 Mirror (LSI ctrl %d)", ctrlIdx)
+		params = taskParams{RAIDController: ctrlIdx, RAIDDevices: req.Devices}
+
+	case req.ControllerID == "vroc-0":
+		arrayName := strings.TrimSpace(req.ArrayName)
+		if arrayName == "" {
+			arrayName = "bee-mirror0"
+		}
+		target = "raid-vroc-create-mirror"
+		name = fmt.Sprintf("Create VROC RAID 1 (%s)", arrayName)
+		params = taskParams{RAIDDevices: req.Devices, RAIDArrayName: arrayName}
+
+	default:
+		writeError(w, http.StatusBadRequest, "unknown controller_id")
+		return
+	}
+
+	t := &Task{
+		ID:        newJobID(target),
+		Name:      name,
+		Target:    target,
+		Priority:  defaultTaskPriority(target, taskParams{}),
+		Status:    TaskPending,
+		CreatedAt: time.Now(),
+		params:    params,
+	}
+	globalQueue.enqueue(t)
+	writeJSON(w, map[string]string{"task_id": t.ID})
+}
+
+func parseLSIControllerIndex(id string) (int, bool) {
+	if !strings.HasPrefix(id, "lsi-") {
+		return 0, false
+	}
+	n, err := strconv.Atoi(strings.TrimPrefix(id, "lsi-"))
+	if err != nil || n < 0 {
+		return 0, false
+	}
+	return n, true
+}
+
+// --- Task runner functions ---
+
+func runRAIDForeignClearTask(ctx context.Context, j *jobState, ctrl int) error {
+	j.append(fmt.Sprintf("Clearing foreign configuration on controller %d...", ctrl))
+	cmd := exec.CommandContext(ctx, "storcli64", fmt.Sprintf("/c%d/fall", ctrl), "del", "noprompt")
+	return streamCmdJob(j, cmd)
+}
+
+func runRAIDForeignImportTask(ctx context.Context, j *jobState, ctrl int) error {
+	j.append(fmt.Sprintf("Importing foreign configuration on controller %d...", ctrl))
+	cmd := exec.CommandContext(ctx, "storcli64", fmt.Sprintf("/c%d/fall", ctrl), "import", "noprompt")
+	return streamCmdJob(j, cmd)
+}
+
+func runRAIDLSICreateMirrorTask(ctx context.Context, j *jobState, ctrl int, drives []string) error {
+	driveList := strings.Join(drives, ",")
+	j.append(fmt.Sprintf("Creating RAID 1 on controller %d with drives: %s", ctrl, driveList))
+	cmd := exec.CommandContext(ctx, "storcli64",
+		fmt.Sprintf("/c%d", ctrl),
+		"add", "vd", "type=raid1",
+		fmt.Sprintf("drives=%s", driveList),
+		"pdperarray=2",
+	)
+	return streamCmdJob(j, cmd)
+}
+
+func runRAIDVROCCreateMirrorTask(ctx context.Context, j *jobState, devices []string, arrayName string) error {
+	if arrayName == "" {
+		arrayName = "bee-mirror0"
+	}
+	devPath := "/dev/md/" + arrayName
+	args := []string{
+		"--create", devPath,
+		"--level=1",
+		fmt.Sprintf("--raid-devices=%d", len(devices)),
+		"--run",
+	}
+	args = append(args, devices...)
+	j.append(fmt.Sprintf("Creating VROC RAID 1 array %s with: %s", devPath, strings.Join(devices, " ")))
+	cmd := exec.CommandContext(ctx, "mdadm", args...)
+	return streamCmdJob(j, cmd)
+}
+
+// raidParseHumanSizeGB parses storcli size strings like "1.818 TB", "745.211 GB".
+func raidParseHumanSizeGB(s string) float64 {
+	s = strings.TrimSpace(s)
+	if s == "" {
+		return 0
+	}
+	upper := strings.ToUpper(s)
+	var mul float64
+	var numStr string
+	switch {
+	case strings.Contains(upper, " TB"):
+		mul = 1024
+		numStr = strings.TrimSpace(strings.SplitN(upper, " T", 2)[0])
+	case strings.Contains(upper, " GB"):
+		mul = 1
+		numStr = strings.TrimSpace(strings.SplitN(upper, " G", 2)[0])
+	case strings.Contains(upper, " MB"):
+		mul = 1.0 / 1024
+		numStr = strings.TrimSpace(strings.SplitN(upper, " M", 2)[0])
+	default:
+		return 0
+	}
+	v, err := strconv.ParseFloat(numStr, 64)
+	if err != nil {
+		return 0
+	}
+	return v * mul
+}
+
+// --- UI card ---
+
+func renderRAIDMgmtCard() string {
+	return `<div class="card"><div class="card-head card-head-actions">RAID Controller Management<div class="card-head-buttons"><button class="btn btn-sm btn-secondary" onclick="raidLoad()">&#8635; Refresh</button></div></div><div class="card-body">
+<div id="raid-status" style="font-size:13px;color:var(--muted);margin-bottom:8px">Loading...</div>
+<div id="raid-content"></div>
+<div id="raid-out-wrap" style="display:none;margin-top:14px">
+  <div style="display:flex;align-items:center;justify-content:space-between;margin-bottom:4px">
+    <span id="raid-out-label" style="font-size:12px;font-weight:600;color:var(--muted)">Output</span>
+    <span id="raid-out-status" style="font-size:12px"></span>
+  </div>
+  <div id="raid-terminal" class="terminal" style="max-height:260px;width:100%;box-sizing:border-box"></div>
+</div>
+</div></div>
+<script>
+(function(){
+function escHtml(s) {
+  return String(s||'').replace(/&/g,'&amp;').replace(/</g,'&lt;').replace(/>/g,'&gt;').replace(/"/g,'&quot;');
+}
+
+var _raidControllers = [];
+
+function raidLoad() {
+  var status = document.getElementById('raid-status');
+  var content = document.getElementById('raid-content');
+  status.textContent = 'Detecting RAID controllers...';
+  status.style.color = 'var(--muted)';
+  content.innerHTML = '';
+  fetch('/api/tools/raid/status', {cache:'no-store'})
+    .then(function(r) {
+      if (!r.ok) return r.json().then(function(e) { throw new Error(e.error || r.statusText); });
+      return r.json();
+    })
+    .then(function(data) {
+      _raidControllers = data.controllers || [];
+      if (_raidControllers.length === 0) {
+        status.textContent = 'No RAID controllers detected.';
+        return;
+      }
+      status.textContent = _raidControllers.length + ' controller(s) detected.';
+      content.innerHTML = _raidControllers.map(function(c, i) {
+        return raidRenderController(c, i);
+      }).join('<hr style="margin:16px 0;border:none;border-top:1px solid var(--border)">');
+    })
+    .catch(function(e) {
+      status.textContent = 'Error: ' + e.message;
+      status.style.color = 'var(--crit-fg)';
+    });
+}
+
+function raidRenderController(c, idx) {
+  var html = '';
+  var typeLabel = c.type === 'lsi' ? 'LSI / Broadcom' : 'Intel VROC';
+  html += '<div style="font-weight:600;font-size:13px;margin-bottom:10px">' + typeLabel + ' &mdash; ' + escHtml(c.model) + '</div>';
+
+  if (c.type === 'lsi') {
+    var foreign = c.foreign_drives || [];
+    if (foreign.length > 0) {
+      html += '<div style="background:var(--warn-bg,rgba(240,192,0,0.1));border:1px solid var(--warn-border,#c8a800);border-radius:4px;padding:10px 12px;margin-bottom:12px">';
+      html += '<div style="font-weight:600;font-size:13px;margin-bottom:6px">&#9888;&#xFE0E; Foreign Configuration Detected (' + foreign.length + ' drive(s))</div>';
+      html += '<table style="margin-bottom:10px"><tr><th>Slot</th><th>Model</th><th>Size</th><th>State</th></tr>';
+      foreign.forEach(function(d) {
+        html += '<tr>'
+          + '<td style="font-family:monospace">' + escHtml(d.slot) + '</td>'
+          + '<td>' + escHtml(d.model||'—') + '</td>'
+          + '<td>' + (d.size_gb > 0 ? Math.round(d.size_gb) + ' GB' : '—') + '</td>'
+          + '<td><span class="badge badge-warn">' + escHtml(d.state) + '</span></td>'
+          + '</tr>';
+      });
+      html += '</table>';
+      html += '<div style="display:flex;gap:8px;flex-wrap:wrap">';
+      html += '<button class="btn btn-sm btn-primary" onclick="raidForeignAction(\'' + escHtml(c.id) + '\',\'import\',this)">Import Foreign Config</button>';
+      html += '<button class="btn btn-sm btn-secondary" style="color:var(--crit-fg)" onclick="raidForeignAction(\'' + escHtml(c.id) + '\',\'clear\',this)">Clear Foreign Config</button>';
+      html += '</div></div>';
+    }
+
+    html += raidRenderMirrorSection(c, idx, 'lsi');
+  }
+
+  if (c.type === 'vroc') {
+    var arrays = c.arrays || [];
+    if (arrays.length > 0) {
+      html += '<div style="font-size:12px;font-weight:600;color:var(--muted);margin-bottom:6px;text-transform:uppercase;letter-spacing:.04em">Active Arrays</div>';
+      html += '<table style="margin-bottom:14px"><tr><th>Name</th><th>Level</th><th>Members</th><th>Status</th></tr>';
+      arrays.forEach(function(a) {
+        var badge = a.degraded
+          ? '<span class="badge badge-err">Degraded</span>'
+          : '<span class="badge badge-ok">OK</span>';
+        html += '<tr>'
+          + '<td style="font-family:monospace">' + escHtml(a.name) + '</td>'
+          + '<td>' + escHtml(a.level||'—') + '</td>'
+          + '<td style="font-family:monospace;font-size:12px">' + (a.members||[]).map(escHtml).join(', ') + '</td>'
+          + '<td>' + badge + '</td>'
+          + '</tr>';
+      });
+      html += '</table>';
+    }
+
+    html += raidRenderMirrorSection(c, idx, 'vroc');
+  }
+
+  return html;
+}
+
+function raidRenderMirrorSection(c, idx, kind) {
+  var free = c.free_drives || [];
+  var html = '<div style="font-size:12px;font-weight:600;color:var(--muted);margin-bottom:6px;text-transform:uppercase;letter-spacing:.04em">Create RAID 1 Mirror</div>';
+
+  if (free.length < 2) {
+    html += '<p style="font-size:13px;color:var(--muted)">No unconfigured drives available (need at least 2).</p>';
+    return html;
+  }
+
+  html += '<p style="font-size:13px;color:var(--muted);margin-bottom:8px">Select exactly 2 drives:</p>';
+  html += '<div>';
+  free.forEach(function(d) {
+    var val = kind === 'lsi' ? d.slot : d.device;
+    var label = kind === 'lsi'
+      ? escHtml(d.slot) + (d.model ? ' &mdash; ' + escHtml(d.model) : '') + (d.size_gb > 0 ? ' (' + Math.round(d.size_gb) + ' GB)' : '')
+      : escHtml(d.device) + (d.model ? ' &mdash; ' + escHtml(d.model) : '') + (d.serial ? ' [' + escHtml(d.serial) + ']' : '');
+    html += '<label style="display:block;margin-bottom:4px;font-size:13px;cursor:pointer">'
+      + '<input type="checkbox" class="raid-mirror-check-' + idx + '" value="' + escHtml(val) + '"> '
+      + label + '</label>';
+  });
+  html += '</div>';
+
+  if (kind === 'vroc') {
+    html += '<div style="margin-top:10px;display:flex;align-items:center;gap:8px;flex-wrap:wrap">'
+      + '<label style="font-size:13px">Array name:&nbsp;<input type="text" id="vroc-arrayname-' + idx + '" value="bee-mirror0" style="font-family:monospace;padding:2px 6px;width:140px"></label>';
+  } else {
+    html += '<div style="margin-top:10px;display:flex;gap:8px">';
+  }
+
+  html += '<button class="btn btn-sm btn-primary raid-mirror-btn-' + idx + '" onclick="raidCreateMirror(\'' + escHtml(c.id) + '\',' + idx + ',\'' + kind + '\',this)">Create Mirror</button>';
+  html += '</div>';
+
+  return html;
+}
+
+function raidForeignAction(ctrlID, action, btn) {
+  if (action === 'clear' && !confirm('Clear foreign configuration on ' + ctrlID + '?\n\nThis will DELETE the foreign RAID metadata. Data on those drives may become inaccessible.')) {
+    return;
+  }
+  var original = btn ? btn.textContent : '';
+  if (btn) { btn.disabled = true; btn.textContent = action === 'import' ? 'Importing...' : 'Clearing...'; }
+  raidShowOutput('RAID foreign ' + action, '', '');
+  fetch('/api/tools/raid/foreign', {
+    method: 'POST',
+    headers: {'Content-Type': 'application/json'},
+    body: JSON.stringify({controller_id: ctrlID, action: action})
+  })
+    .then(function(r) { return r.json(); })
+    .then(function(d) {
+      if (d.error) throw new Error(d.error);
+      var actionLabel = action === 'import' ? 'Import foreign config' : 'Clear foreign config';
+      raidStreamTask(d.task_id, actionLabel, function() {
+        if (btn) { btn.disabled = false; btn.textContent = original; }
+        raidLoad();
+      });
+    })
+    .catch(function(e) {
+      raidShowOutput('Error', 'failed', e.message);
+      if (btn) { btn.disabled = false; btn.textContent = original; }
+    });
+}
+
+function raidCreateMirror(ctrlID, idx, kind, btn) {
+  var checks = document.querySelectorAll('.raid-mirror-check-' + idx + ':checked');
+  if (checks.length !== 2) {
+    alert('Select exactly 2 drives.');
+    return;
+  }
+  var devices = Array.from(checks).map(function(c) { return c.value; });
+  var arrayName = '';
+  if (kind === 'vroc') {
+    var nameEl = document.getElementById('vroc-arrayname-' + idx);
+    arrayName = nameEl ? nameEl.value.trim() : 'bee-mirror0';
+    if (!arrayName) arrayName = 'bee-mirror0';
+  }
+  var original = btn ? btn.textContent : '';
+  if (btn) { btn.disabled = true; btn.textContent = 'Creating...'; }
+  raidShowOutput('Create RAID 1', '', '');
+  fetch('/api/tools/raid/create-mirror', {
+    method: 'POST',
+    headers: {'Content-Type': 'application/json'},
+    body: JSON.stringify({controller_id: ctrlID, devices: devices, array_name: arrayName})
+  })
+    .then(function(r) { return r.json(); })
+    .then(function(d) {
+      if (d.error) throw new Error(d.error);
+      raidStreamTask(d.task_id, 'Create RAID 1 mirror', function() {
+        if (btn) { btn.disabled = false; btn.textContent = original; }
+        raidLoad();
+      });
+    })
+    .catch(function(e) {
+      raidShowOutput('Error', 'failed', e.message);
+      if (btn) { btn.disabled = false; btn.textContent = original; }
+    });
+}
+
+function raidShowOutput(label, status, text) {
+  var wrap = document.getElementById('raid-out-wrap');
+  var labelEl = document.getElementById('raid-out-label');
+  var statusEl = document.getElementById('raid-out-status');
+  var term = document.getElementById('raid-terminal');
+  wrap.style.display = 'block';
+  labelEl.textContent = label;
+  if (status === 'ok') {
+    statusEl.textContent = '✓ done';
+    statusEl.style.color = 'var(--ok-fg)';
+  } else if (status === 'failed') {
+    statusEl.textContent = '✗ failed';
+    statusEl.style.color = 'var(--crit-fg)';
+  } else {
+    statusEl.textContent = status;
+    statusEl.style.color = 'var(--muted)';
+  }
+  if (text !== undefined) {
+    term.textContent = text;
+    term.scrollTop = term.scrollHeight;
+  }
+}
+
+function raidStreamTask(taskID, taskName, onDone) {
+  var term = document.getElementById('raid-terminal');
+  term.textContent = '';
+  raidShowOutput(taskName || 'Running…', 'running…', undefined);
+  var es = new EventSource('/api/tasks/' + taskID + '/stream');
+  es.onmessage = function(e) {
+    term.textContent += e.data + '\n';
+    term.scrollTop = term.scrollHeight;
+  };
+  es.addEventListener('done', function(e) {
+    es.close();
+    if (!e.data) {
+      raidShowOutput(taskName, 'ok', undefined);
+    } else {
+      raidShowOutput(taskName, 'failed', undefined);
+      term.textContent += '\nFailed: ' + e.data;
+      term.scrollTop = term.scrollHeight;
+    }
+    if (onDone) onDone();
+  });
+  es.onerror = function() {
+    es.close();
+    raidShowOutput(taskName, 'failed', undefined);
+    if (onDone) onDone();
+  };
+}
+
+window.raidLoad = raidLoad;
+raidLoad();
+})();
+</script>`
+}

audit/internal/webui/saa_dmi.go

@@ -28,7 +28,8 @@ var (
 	shnRE        = regexp.MustCompile(`^[A-Za-z0-9_]{1,16}$`)
 	dmiSectionRE = regexp.MustCompile(`^\[(.+?)\]$`)
 	// Item Name   {SHN}   = value   // comment
-	dmiItemRE    = regexp.MustCompile(`^(.+?)\s+\{([A-Za-z0-9]{1,16})\}\s*=\s*(.*)$`)
+	// SHN may contain parentheses, e.g. {PS(4)LC} for power supply fields
+	dmiItemRE    = regexp.MustCompile(`^(.+?)\s+\{([A-Za-z0-9_()\-]{1,24})\}\s*=\s*(.*)$`)
 	dmiVersionRE = regexp.MustCompile(`(?i)^version\s*=`)
 )
 
@@ -91,7 +92,9 @@ func (h *handler) handleAPISAADMIRead(w http.ResponseWriter, r *http.Request) {
 	defer os.RemoveAll(tmpDir)
 
 	dmiFile := filepath.Join(tmpDir, "DMI.txt")
-	out, err := exec.CommandContext(ctx, "saa", "-c", "GetDmiInfo", "--file", dmiFile, "--overwrite").CombinedOutput()
+	cmd := exec.CommandContext(ctx, "saa", "-c", "GetDmiInfo", "--file", dmiFile, "--overwrite")
+	cmd.Dir = "/usr/local/bin"
+	out, err := cmd.CombinedOutput()
 	if err != nil {
 		msg := strings.TrimSpace(string(out))
 		if msg == "" {
@@ -168,7 +171,9 @@ func runSAADMIWriteTask(ctx context.Context, j *jobState, exportDir string, p ta
 	dmiFile := filepath.Join(tmpDir, "DMI.txt")
 
 	j.append("Reading current DMI configuration...")
-	if err := streamCmdJob(j, exec.CommandContext(ctx, "saa", "-c", "GetDmiInfo", "--file", dmiFile, "--overwrite")); err != nil {
+	getCmd := exec.CommandContext(ctx, "saa", "-c", "GetDmiInfo", "--file", dmiFile, "--overwrite")
+	getCmd.Dir = "/usr/local/bin"
+	if err := streamCmdJob(j, getCmd); err != nil {
 		return fmt.Errorf("GetDmiInfo: %w", err)
 	}
 
@@ -190,13 +195,16 @@ func runSAADMIWriteTask(ctx context.Context, j *jobState, exportDir string, p ta
 	for _, c := range p.SAADmiChanges {
 		j.append("Setting " + c.Shn + " = " + c.Value)
 		cmd := exec.CommandContext(ctx, "saa", "-c", "EditDmiInfo", "--file", dmiFile, "--shn", c.Shn, "--value", c.Value)
+		cmd.Dir = "/usr/local/bin"
 		if err := streamCmdJob(j, cmd); err != nil {
 			return fmt.Errorf("EditDmiInfo %s: %w", c.Shn, err)
 		}
 	}
 
 	j.append("Applying changes to hardware...")
-	if err := streamCmdJob(j, exec.CommandContext(ctx, "saa", "-c", "ChangeDmiInfo", "--file", dmiFile)); err != nil {
+	changeCmd := exec.CommandContext(ctx, "saa", "-c", "ChangeDmiInfo", "--file", dmiFile)
+	changeCmd.Dir = "/usr/local/bin"
+	if err := streamCmdJob(j, changeCmd); err != nil {
 		return fmt.Errorf("ChangeDmiInfo: %w", err)
 	}
 

audit/internal/webui/server.go

@@ -316,6 +316,11 @@ func NewHandler(opts HandlerOptions) http.Handler {
 	mux.HandleFunc("POST /api/tools/nvme-format/run", h.handleAPINVMeFormatRun)
 	mux.HandleFunc("GET /api/tools/saa-dmi", h.handleAPISAADMIRead)
 	mux.HandleFunc("POST /api/tools/saa-dmi/write", h.handleAPISAADMIWrite)
+	mux.HandleFunc("GET /api/tools/ipmi-fru", h.handleAPIIPMIFRURead)
+	mux.HandleFunc("POST /api/tools/ipmi-fru/write", h.handleAPIIPMIFRUWrite)
+	mux.HandleFunc("GET /api/tools/raid/status", h.handleAPIRAIDStatus)
+	mux.HandleFunc("POST /api/tools/raid/foreign", h.handleAPIRAIDForeignAction)
+	mux.HandleFunc("POST /api/tools/raid/create-mirror", h.handleAPIRAIDCreateMirror)
 
 	// GPU presence / tools
 	mux.HandleFunc("GET /api/gpu/presence", h.handleAPIGPUPresence)
@@ -327,6 +332,8 @@ func NewHandler(opts HandlerOptions) http.Handler {
 	// System
 	mux.HandleFunc("GET /api/system/ram-status", h.handleAPIRAMStatus)
 	mux.HandleFunc("POST /api/system/install-to-ram", h.handleAPIInstallToRAM)
+	mux.HandleFunc("POST /api/system/reboot", h.handleAPISystemReboot)
+	mux.HandleFunc("POST /api/system/shutdown", h.handleAPISystemShutdown)
 
 	// Preflight
 	mux.HandleFunc("GET /api/preflight", h.handleAPIPreflight)
@@ -1424,13 +1431,13 @@ func (h *handler) handlePage(w http.ResponseWriter, r *http.Request) {
 	// Redirect legacy routes to new named pages
 	switch page {
 	case "validate", "tests":
-		http.Redirect(w, r, "/check", http.StatusMovedPermanently)
-		return
-	case "burn", "burn-in":
 		http.Redirect(w, r, "/load", http.StatusMovedPermanently)
 		return
-	case "benchmark":
-		http.Redirect(w, r, "/speed", http.StatusMovedPermanently)
+	case "burn-in":
+		http.Redirect(w, r, "/burn", http.StatusMovedPermanently)
+		return
+	case "speed", "endurance":
+		http.Redirect(w, r, "/benchmark", http.StatusMovedPermanently)
 		return
 	}
 	body := renderPage(page, h.opts)

audit/internal/webui/server_test.go

@@ -717,13 +717,13 @@ func TestToolsPageRendersNvidiaSelfHealSection(t *testing.T) {
 func TestBenchmarkPageRendersGPUSelectionControls(t *testing.T) {
 	handler := NewHandler(HandlerOptions{})
 	rec := httptest.NewRecorder()
-	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/speed", nil))
+	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/benchmark", nil))
 	if rec.Code != http.StatusOK {
 		t.Fatalf("status=%d", rec.Code)
 	}
 	body := rec.Body.String()
 	for _, needle := range []string{
-		`href="/speed"`,
+		`href="/benchmark"`,
 		`id="benchmark-gpu-list"`,
 		`/api/gpu/nvidia`,
 		`/api/bee-bench/nvidia/perf/run`,
@@ -779,7 +779,7 @@ func TestBenchmarkPageRendersSavedResultsTable(t *testing.T) {
 
 	handler := NewHandler(HandlerOptions{ExportDir: exportDir})
 	rec := httptest.NewRecorder()
-	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/speed", nil))
+	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/benchmark", nil))
 	if rec.Code != http.StatusOK {
 		t.Fatalf("status=%d", rec.Code)
 	}
@@ -844,10 +844,10 @@ func TestCheckPageRendersNvidiaFabricCards(t *testing.T) {
 	}
 }
 
-func TestLoadPageRendersGoalBasedNVIDIACards(t *testing.T) {
+func TestBurnPageRendersGoalBasedNVIDIACards(t *testing.T) {
 	handler := NewHandler(HandlerOptions{})
 	rec := httptest.NewRecorder()
-	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/load", nil))
+	handler.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/burn", nil))
 	if rec.Code != http.StatusOK {
 		t.Fatalf("status=%d", rec.Code)
 	}

audit/internal/webui/task_runner.go

@@ -388,6 +388,28 @@ func executeTaskWithOptions(opts *HandlerOptions, t *Task, j *jobState, ctx cont
 			break
 		}
 		err = runSAADMIWriteTask(ctx, j, opts.ExportDir, t.params)
+	case "ipmi-fru-write":
+		if len(t.params.FRUChanges) == 0 {
+			err = fmt.Errorf("no changes provided")
+			break
+		}
+		err = runIPMIFRUWriteTask(ctx, j, opts.ExportDir, t.params)
+	case "raid-foreign-clear":
+		err = runRAIDForeignClearTask(ctx, j, t.params.RAIDController)
+	case "raid-foreign-import":
+		err = runRAIDForeignImportTask(ctx, j, t.params.RAIDController)
+	case "raid-lsi-create-mirror":
+		if len(t.params.RAIDDevices) < 2 {
+			err = fmt.Errorf("at least 2 drives required")
+			break
+		}
+		err = runRAIDLSICreateMirrorTask(ctx, j, t.params.RAIDController, t.params.RAIDDevices)
+	case "raid-vroc-create-mirror":
+		if len(t.params.RAIDDevices) < 2 {
+			err = fmt.Errorf("at least 2 devices required")
+			break
+		}
+		err = runRAIDVROCCreateMirrorTask(ctx, j, t.params.RAIDDevices, t.params.RAIDArrayName)
 	default:
 		j.append("ERROR: unknown target: " + t.Target)
 		j.finish("unknown target")

audit/internal/webui/tasks.go

@@ -140,7 +140,11 @@ type taskParams struct {
 	Device             string      `json:"device,omitempty"` // for install
 	LBAF               int         `json:"lbaf,omitempty"`
 	PlatformComponents []string    `json:"platform_components,omitempty"`
-	SAADmiChanges      []saaChange `json:"saa_dmi_changes,omitempty"`
+	SAADmiChanges      []saaChange  `json:"saa_dmi_changes,omitempty"`
+	FRUChanges         []fruChange  `json:"fru_changes,omitempty"`
+	RAIDController     int          `json:"raid_controller,omitempty"`
+	RAIDDevices        []string     `json:"raid_devices,omitempty"`
+	RAIDArrayName      string       `json:"raid_array_name,omitempty"`
 }
 
 type persistedTask struct {

iso/builder/build.sh

@@ -1483,6 +1483,17 @@ for tool in storcli64 sas2ircu sas3ircu arcconf ssacli saa; do
     fi
 done
 
+# saa companion directories — saa searches for these relative to CWD (/usr/local/bin)
+for saa_subdir in acpica_bin ExternalData tool stunnel GO_SNMP; do
+    if [ -d "${VENDOR_DIR}/${saa_subdir}" ]; then
+        cp -r "${VENDOR_DIR}/${saa_subdir}" "${OVERLAY_STAGE_DIR}/usr/local/bin/"
+        find "${OVERLAY_STAGE_DIR}/usr/local/bin/${saa_subdir}" -type f -exec chmod +x {} \; 2>/dev/null || true
+        echo "vendor saa: ${saa_subdir}/ (included)"
+    else
+        echo "vendor saa: ${saa_subdir}/ (not found, skipped)"
+    fi
+done
+
 # --- NVIDIA kernel modules and userspace libs ---
 if [ "$BEE_GPU_VENDOR" = "nvidia" ]; then
     run_step "build NVIDIA ${NVIDIA_DRIVER_VERSION} modules" "40-nvidia-module" \

iso/vendor/ExternalData/supportAutoDST

@@ -0,0 +1,37 @@
+(UTC-10:00) Aleutian Islands
+(UTC-09:00) Alaska
+(UTC-08:00) Baja California
+(UTC-08:00) Pacific Time (US & Canada)
+(UTC-07:00) Mountain Time (US & Canada)
+(UTC-06:00) Central Time (US & Canada)
+(UTC-06:00) Easter Island
+(UTC-05:00) Eastern Time (US & Canada)
+(UTC-05:00) Haiti
+(UTC-05:00) Havana
+(UTC-05:00) Indiana (East)
+(UTC-05:00) Turks and Caicos
+(UTC-04:00) Asuncion
+(UTC-04:00) Atlantic Time (Canada)
+(UTC-04:00) Santiago
+(UTC-03:30) Newfoundland
+(UTC-03:00) Saint Pierre and Miquelon
+(UTC-01:00) Azores
+(UTC+00:00) Dublin, Edinburgh, Lisbon, London
+(UTC+01:00) Casablanca
+(UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
+(UTC+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
+(UTC+01:00) Brussels, Copenhagen, Madrid, Paris
+(UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb
+(UTC+02:00) Athens, Bucharest
+(UTC+02:00) Beirut
+(UTC+02:00) Chisinau
+(UTC+02:00) Gaza, Hebron
+(UTC+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius
+(UTC+02:00) Jerusalem
+(UTC+09:30) Adelaide
+(UTC+10:00) Canberra, Melbourne, Sydney
+(UTC+10:00) Hobart
+(UTC+10:30) Lord Howe Island
+(UTC+11:00) Norfolk Island
+(UTC+12:00) Auckland, Wellington
+(UTC+12:45) Chatham Islands

iso/vendor/ExternalData/timezone.txt

@@ -0,0 +1,139 @@
+(UTC-12:00) International Date Line West
+(UTC-11:00) Coordinated Universal Time-11
+(UTC-10:00) Aleutian Islands
+(UTC-10:00) Hawaii
+(UTC-09:30) Marquesas Islands
+(UTC-09:00) Alaska
+(UTC-09:00) Coordinated Universal Time-09
+(UTC-08:00) Baja California
+(UTC-08:00) Coordinated Universal Time-08
+(UTC-08:00) Pacific Time (US & Canada)
+(UTC-07:00) Arizona
+(UTC-07:00) Chihuahua, La Paz, Mazatlan
+(UTC-07:00) Mountain Time (US & Canada)
+(UTC-07:00) Yukon
+(UTC-06:00) Central America
+(UTC-06:00) Central Time (US & Canada)
+(UTC-06:00) Easter Island
+(UTC-06:00) Guadalajara, Mexico City, Monterrey
+(UTC-06:00) Saskatchewan
+(UTC-05:00) Bogota, Lima, Quito, Rio Branco
+(UTC-05:00) Chetumal
+(UTC-05:00) Eastern Time (US & Canada)
+(UTC-05:00) Haiti
+(UTC-05:00) Havana
+(UTC-05:00) Indiana (East)
+(UTC-05:00) Turks and Caicos
+(UTC-04:00) Atlantic Time (Canada)
+(UTC-04:00) Caracas
+(UTC-04:00) Cuiaba
+(UTC-04:00) Georgetown, La Paz, Manaus, San Juan
+(UTC-04:00) Santiago
+(UTC-03:30) Newfoundland
+(UTC-03:00) Asuncion
+(UTC-03:00) Araguaina
+(UTC-03:00) Brasilia
+(UTC-03:00) Cayenne, Fortaleza
+(UTC-03:00) City of Buenos Aires
+(UTC-03:00) Greenland
+(UTC-03:00) Montevideo
+(UTC-03:00) Punta Arenas
+(UTC-03:00) Saint Pierre and Miquelon
+(UTC-03:00) Salvador
+(UTC-02:00) Coordinated Universal Time-02
+(UTC-01:00) Azores
+(UTC-01:00) Cabo Verde Is.
+(UTC+00:00) Coordinated Universal Time
+(UTC+00:00) Dublin, Edinburgh, Lisbon, London
+(UTC+00:00) Monrovia, Reykjavik
+(UTC+00:00) Sao Tome
+(UTC+01:00) Casablanca
+(UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
+(UTC+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
+(UTC+01:00) Brussels, Copenhagen, Madrid, Paris
+(UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb
+(UTC+01:00) West Central Africa
+(UTC+02:00) Amman
+(UTC+02:00) Athens, Bucharest
+(UTC+02:00) Beirut
+(UTC+02:00) Cairo
+(UTC+02:00) Chisinau
+(UTC+02:00) Damascus
+(UTC+02:00) Gaza, Hebron
+(UTC+02:00) Harare, Pretoria
+(UTC+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius
+(UTC+02:00) Jerusalem
+(UTC+02:00) Juba
+(UTC+02:00) Kaliningrad
+(UTC+02:00) Khartoum
+(UTC+02:00) Tripoli
+(UTC+02:00) Windhoek
+(UTC+03:00) Baghdad
+(UTC+03:00) Istanbul
+(UTC+03:00) Kuwait, Riyadh
+(UTC+03:00) Minsk
+(UTC+03:00) Moscow, St. Petersburg
+(UTC+03:00) Nairobi
+(UTC+03:00) Volgograd
+(UTC+03:30) Tehran
+(UTC+04:00) Abu Dhabi, Muscat
+(UTC+04:00) Astrakhan, Ulyanovsk
+(UTC+04:00) Baku
+(UTC+04:00) Izhevsk, Samara
+(UTC+04:00) Port Louis
+(UTC+04:00) Saratov
+(UTC+04:00) Tbilisi
+(UTC+04:00) Yerevan
+(UTC+04:30) Kabul
+(UTC+05:00) Ashgabat, Tashkent
+(UTC+05:00) Astana
+(UTC+05:00) Ekaterinburg
+(UTC+05:00) Islamabad, Karachi
+(UTC+05:00) Qyzylorda
+(UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi
+(UTC+05:30) Sri Jayawardenepura
+(UTC+05:45) Kathmandu
+(UTC+06:00) Dhaka
+(UTC+06:00) Omsk
+(UTC+06:30) Yangon (Rangoon)
+(UTC+07:00) Bangkok, Hanoi, Jakarta
+(UTC+07:00) Barnaul, Gorno-Altaysk
+(UTC+07:00) Hovd
+(UTC+07:00) Krasnoyarsk
+(UTC+07:00) Novosibirsk
+(UTC+07:00) Tomsk
+(UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi
+(UTC+08:00) Irkutsk
+(UTC+08:00) Kuala Lumpur, Singapore
+(UTC+08:00) Perth
+(UTC+08:00) Taipei
+(UTC+08:00) Ulaanbaatar
+(UTC+08:45) Eucla
+(UTC+09:00) Chita
+(UTC+09:00) Osaka, Sapporo, Tokyo
+(UTC+09:00) Pyongyang
+(UTC+09:00) Seoul
+(UTC+09:00) Yakutsk
+(UTC+09:30) Adelaide
+(UTC+09:30) Darwin
+(UTC+10:00) Brisbane
+(UTC+10:00) Canberra, Melbourne, Sydney
+(UTC+10:00) Guam, Port Moresby
+(UTC+10:00) Hobart
+(UTC+10:00) Vladivostok
+(UTC+10:30) Lord Howe Island
+(UTC+11:00) Bougainville Island
+(UTC+11:00) Chokurdakh
+(UTC+11:00) Magadan
+(UTC+11:00) Norfolk Island
+(UTC+11:00) Sakhalin
+(UTC+11:00) Solomon Is., New Caledonia
+(UTC+12:00) Anadyr, Petropavlovsk-Kamchatsky
+(UTC+12:00) Auckland, Wellington
+(UTC+12:00) Coordinated Universal Time+12
+(UTC+12:00) Fiji
+(UTC+12:45) Chatham Islands
+(UTC+13:00) Coordinated Universal Time+13
+(UTC+13:00) Nuku'alofa
+(UTC+13:00) Samoa
+(UTC+14:00) Kiritimati Island