live-build picks up ALL .list.chroot files in config/package-lists/.
After rsync, bee-nvidia.list.chroot, bee-amd.list.chroot, and
bee-nogpu.list.chroot all end up in BUILD_WORK_DIR — causing lb to
try installing packages from every variant (and leaving version
placeholders unsubstituted in the unused lists).
Fix: after copying bee-${BEE_GPU_VENDOR}.list.chroot → bee-gpu.list.chroot,
delete all other bee-{nvidia,amd,nogpu}.list.chroot from BUILD_WORK_DIR.
Also includes nomsi boot mode changes (bee-nvidia-load + grub.cfg).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- build.sh: add --variant nvidia|amd; separate work dirs per variant
(live-build-work-nvidia / live-build-work-amd); GPU-specific steps
(modules, NCCL, cuBLAS, nccl-tests) run only for nvidia; deb package
cache synced back to shared location after each lb build so second
variant reuses downloaded packages; ISO output named
easy-bee-{variant}-v{ver}-amd64.iso
- build-in-container.sh: add --variant nvidia|amd|all (default: all);
runs build.sh twice in one container for 'all'; --clean-build wipes
both variant work dirs
- package-lists: remove GPU packages from bee.list.chroot; add
bee-nvidia.list.chroot (DCGM) and bee-amd.list.chroot (ROCm)
- 9000-bee-setup hook: read /etc/bee-gpu-vendor; enable bee-nvidia.service
and DCGM only for nvidia; set up ROCm symlinks only for amd
- auto/config: --iso-volume uses BEE_GPU_VENDOR_UPPER env var
- grub.cfg: add nomodeset to EASY-BEE and EASY-BEE (load to RAM) entries
— fixes X/lightdm on BMC KVM (ASPEED AST chip requires nomodeset for
fbdev to work; NVIDIA H100 compute does not need KMS)
- bee.sh / smoketest.sh: add /usr/sbin to PATH so dmidecode, smartctl,
nvme are found
- 9100-memtest hook: add diagnostic listing of chroot/boot/memtest* files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add udev rule: /dev/ipmi0 readable by 'ipmi' group (no sudo needed)
- Add 'ipmi' group creation and bee user membership in chroot hook
- Remove legend from all charts (data shown in GPU table below)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without these modules /dev/ipmi0 doesn't exist and ipmitool can't
read fan RPM, PSU fans, or IPMI temperature sensors.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-web.service: remove After=bee-audit so Go starts immediately
- Go serves loading page from / when audit JSON not yet present;
JS polls /api/ready (503 until file exists, 200 when ready)
then redirects to dashboard
- bee-openbox-session: wait for /healthz (Go binds fast <2s),
open http://localhost/ directly — no file:// cross-origin issues
- Remove loading.html static file
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace 15s blocking wait with instant Chromium launch showing a
dark loading page that polls /healthz every 500ms and auto-redirects
to the app when ready.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Switch to performance governor when task queue starts processing,
back to powersave when queue drains. Removes bee-cpuperf.service.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- All prompts accept 'a' = abort, 'b' = back to previous step
- Interface input: validate numeric range and name existence, re-prompt on bad input
- IP address: regex check x.x.x.x/prefix format
- Gateway: regex check x.x.x.x format
- Main loop: 'b' at mode selection goes back to interface list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On real server hardware (IPMI/BMC AST chip + nomodeset) the VESA
framebuffer is set by BIOS at whatever resolution it chooses (often
1024x768 or 1280x1024). The hardcoded 1920x1080 Modeline caused X to
fail → LightDM crash-loop → SOL console flooded with systemd messages.
- Remove Monitor section / Modeline from xorg.conf — fbdev now uses
whatever framebuffer resolution the kernel provides
- Add lightdm.service.d/bee-limits.conf: RestartSec=10,
max 3 restarts per 60s so headless hardware doesn't spam the console
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
User sees a numbered list but could only type the name.
Now numeric input is resolved to the interface name via awk NR==N.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add video=1920x1080 to kernel cmdline (sets fbdev to Full HD)
- Update GRUB gfxmode to 1920x1080 (fallback to 1280x1024,auto)
- Add Xorg Monitor section with 1920x1080 Modeline and preferred mode
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from user shell has /dev/fb0 permission issues and is fragile.
LightDM starts Xorg as root — standard LiveCD approach that works
on server hardware / IPMI KVM with nomodeset + fbdev/vesa.
- Add lightdm package, configure autologin as bee/openbox session
- Add /usr/share/xsessions/openbox.desktop
- Remove startx from .profile (LightDM manages X lifecycle)
- Remove Xwrapper.config needs_root_rights workaround (no longer needed)
- Enable lightdm.service in setup hook
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If X fails to start, the user gets a working shell prompt instead
of a dead session or autologin loop.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Interactive script: lists interfaces, DHCP or static IP config.
Shown as hint in tty1 welcome message.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Explicit xorg.conf.d config prevents Xorg from trying KMS/DRM
drivers that fail on server hardware with nomodeset.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from autologin shell targets VT1 directly — KVM sees the
graphical UI without VT switching. Remove bee-desktop.service
(systemd-launched X defaults to VT7, invisible on KVM).
Add xserver-xorg-video-fbdev for server AST/VGA framebuffer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Copies the live system to a local disk via unsquashfs — no debootstrap,
no network required. Supports UEFI (GPT+EFI) and BIOS (MBR) layouts.
ISO:
- Add squashfs-tools, parted, grub-pc, grub-efi-amd64 to package list
- New overlay script bee-install: partitions, formats, unsquashfs,
writes fstab, runs grub-install+update-grub in chroot
Go TUI:
- Settings → Tools submenu (Install to disk, Check tools)
- Disk picker screen: lists non-USB, non-boot disks via lsblk
- Confirm screen warns about data loss
- Runs with live progress tail of /tmp/bee-install.log
- platform/install.go: ListInstallDisks, InstallToDisk, findLiveBootDevice
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
console=tty0 sent kernel messages to the active VT (tty1), overwriting
the TUI. Changed to console=tty2 so kernel logs land on a dedicated
console. tty1 is now clean; operator can press Alt+F2 to inspect kernel
messages and Alt+F3 for an extra shell.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
loglevel=3 was hiding all kernel messages on tty0/ttyS0 except errors.
Machine crashes (panics, driver oops, module failures) were silent on VGA.
Restored loglevel=7 so kernel messages up to debug are printed to both
tty0 (VGA) and ttyS0 (SOL). Journald MaxLevelConsole reduced to info
(was debug) to reduce noise on SOL while keeping it useful.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- build-nvidia-module.sh: copy libnvidia-ptxjitcompiler.so.* alongside
libcuda/libnvidia-ml — required by cuModuleLoadDataEx for PTX JIT.
Without it: CUDA_ERROR_JIT_COMPILER_NOT_FOUND at runtime.
Cache check updated to force rebuild when ptxjitcompiler is missing.
- bee-nvidia-load: run ldconfig after module load so that NVIDIA/NCCL
libs injected into /usr/lib/ are visible to dlopen() callers.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
isGPUDevice matched all AMD vendor PCIe devices (SATA, crypto coprocessors,
PCIe dummies) because of a broad strings.Contains(vendor,"amd") check.
Remove it — AMD Instinct/Radeon GPUs are caught by ProcessingAccelerator /
DisplayController class. Also exclude ASPEED (BMC VGA adapter).
Add clear before bee-tui to avoid dirty terminal output.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Check PCI vendor 10de before attempting insmod — avoids spurious
nvidia_uvm symbol errors on systems without NVIDIA hardware (e.g. AMD MI350).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace "Bee Hardware Audit" branding with EASY-BEE across bootloader
and LiveCD: grub.cfg menu entries, echo ASCII art before menu,
motd banner, iso-volume and iso-application metadata.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without a keepalive the kernel watchdog timer expires and reboots
the host mid-audit. Configuring RuntimeWatchdogSec lets systemd PID 1
reset /dev/watchdog every 30 s — well within the typical 60 s timeout.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
