Exposes the scenario engine (platform.System.RunScenario, added earlier)
in the web UI instead of only the `bee run` CLI: a new nav item lists every
scenarios/*.json found on mounted removable media (GET /api/scenario/list)
and runs one with a click (POST /api/scenario/run), enqueued as a normal
Task with target "scenario" — progress/logs live in Tasks like any other
SAT pack, no separate live-output UI needed.
- app.go: satRunner gains RunScenario, exportManager gains
ListScenarioFilesOnRemovableMedia/ReadScenarioFromRemovableMedia — both
already implemented on platform.System, just newly exposed through App.
- webui/tasks.go: taskParams.ScenarioName; runTask's "scenario" case reads
the file from removable media, parses it, and runs it.
- webui/page_scenario.go: the page itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Investigating the CG480-S6053 reboot needed a way to run an ad-hoc load
(nvbandwidth across a specific GPU set) while sampling IPMI/nvidia-smi
telemetry in the background — without hardcoding a one-off test into the
SAT pack code for a single investigation.
- audit/internal/platform/scenario.go: ScenarioSpec/ScenarioJob (JSON,
no new dependency) + System.RunScenario. "command" jobs run sequential
or parallel (per-job "parallel" flag); "sampler" jobs run concurrently
in the background on their own interval until every command job
finishes or the scenario's timeout elapses. "{{gpus}}" in a command's
cmd is substituted from that job's gpu_indices. Command jobs are wired
through the same satJobBoundaryHook/satSyncBracketHook seams the SAT
job runner uses, so a scenario run gets the same durability treatment
(evidence that a risky command started/finished reaches blackbox before
a possible crash, not just whatever streamed to the RAM-backed export
dir).
- export.go: ReadScenarioFromRemovableMedia mounts each removable target
looking for scenarios/<name>.json — an air-gapped engineer can author a
scenario elsewhere, drop it under scenarios/ on the same USB stick
already plugged in for blackbox, and run it with no network path onto
the host.
- cmd/bee: new `bee run <file.json|name>` (bare name = looked up on
removable media); `bee scenario run <arg>` kept as a longer alias.
- scenarios/nvbandwidth-all-gpu-power-watch.json: the scenario that
reproduced the actual reboot (full nvbandwidth across all GPUs, which
crashed, vs. clean per-socket passes), with IPMI sensor + GPU power/temp
sampling for a power-delivery correlation check.
Also: webui/page_topo.go — the /topo page's component-status-detail modal
(GET /api/component-detail/{type}) showed "No status data recorded yet"
for any component type ComponentStatusDB has no history for yet (e.g. GPU
before a SAT run this boot), even though the topology card for the same
component already showed "N OK" from the audit inventory snapshot.
inventoryFallbackRecords now synthesizes records from that same inventory
snapshot when StatusDB is empty, using the same device classifiers
(isGPUDeviceClass etc.) and severity mapping (classifyTopoSeverity) the
topology card itself uses, so the two views never disagree.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
copyPath/copyPathFiltered treated any os.Stat/os.ReadDir/os.Open error on a
source entry as fatal, aborting the entire tree copy. A source path is read
from the live export dir while bee's own task runner concurrently renames
task directories (e.g. "_pending" -> "_done") — an entry present in the
parent's os.ReadDir a moment ago disappearing by the time it's individually
Stat'd/Open'd is an expected race, not a real failure.
Seen on a real crash bundle: blackbox got stuck in status "degraded" from
early in the run (first hit during the CPU pack, well before the GPU tests)
after exactly this race, and every syncBracket wait then timed out for the
rest of the run — the discovery/wait plumbing from the previous fix works,
but had nothing working under it to wait on. The target also accumulated
stale "_pending" copies alongside "_done" ones with no cleanup, though
fixing that dedup is left for a follow-up.
os.IsNotExist(err) now skips the vanished entry instead of propagating.
Added regression tests simulating the race directly (copy_path_race_test.go).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the flat export/ + techdump/ + system/ + systemd/ layout (two
same-named-but-different techdump/ dirs, disk reports duplicated between a
SAT run dir and techdump/) with one shared categorizeExportTree used by both
BuildSupportBundle and the blackbox USB mirror:
- export/{cpu,memory,storage,gpu,network,platform}/ — raw vendor-tool
output grouped by device type, plus export/reanimator.json ready to POST
to Reanimator's /ingest/hardware endpoint.
- status/ — computed diagnosis (component-status.json, runtime-health.*,
and metrics.db, previously missing from every bundle entirely).
- tasks/ — bee's own task-run bookkeeping (bee-sat/, bee-bench/, task
reports, service logs) where duplication with export/ is expected.
- livecd/{gui,host}/ — live-boot/kiosk-session-only diagnostics, kept out
of the hardware-facing tree.
Drops the redundant disk-report mirror write in RunStorageAcceptancePack
and the now-dead syncDirectoryTree/removeMissingPaths; adds a size+mtime
skip in copyPath so the blackbox mirror doesn't rewrite unchanged files
every cycle. README.md rewritten to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- gpuBandwidthSocketGroups: a single GPU whose NUMA node fails to resolve
no longer collapses the whole per-socket nvbandwidth split into one
fallback pass — it now folds into the last resolved group instead,
preserving isolation for the sockets that did resolve.
- blackbox discoverMarkedTargets: skip mounting/unmounting devices that
already have a running worker on every 2s discovery tick. This was
observed hammering the same USB target continuously (mount+unmount
every ~2s for the whole session) and contending with the worker's own
sync cycle, plausibly explaining multi-minute sync cycles seen on a
real crash bundle.
- syncFilesystem now calls syscall.Sync() directly instead of spawning
/bin/sync per copied file; blackbox mounts removable targets with
-o sync so writes are durable without relying on the app-level sync as
the primary mechanism.
- New platform.SetSyncBracketHook / satJob.syncBracket: blocks (with a
bounded timeout) on blackbox actually reaching removable media right
before and right after a diagnostic's real load step (nvbandwidth,
memtester, stress-ng, dcgmi diag, nccl, smartctl/nvme self-test...),
instead of only firing a fire-and-forget kick after the job's own log
file is written. A crash mid-load now has durable evidence the load
started, not just whatever streamed to the RAM-backed export dir before
blackbox's next scheduled cycle.
Found investigating a real support bundle where blackbox's last
successful sync (19:55:25) predated both the previous job finishing and
the crashing nvbandwidth job starting (19:56:57) — none of the crash
window ever reached durable media.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A crash mid-command (e.g. the nvbandwidth reboot) previously lost that
job's entire output: streamExecOutput only buffered stdout/stderr in
memory and the job's log file was written once, after the process
exited. It now also streams each line straight to that file as it
arrives, so whatever printed before a crash survives.
Root filesystem here is a tmpfs overlay (toram boot), so the only real
persistence boundary is blackbox's mirror to removable media, not the
local write itself. platform.SetJobBoundaryHook lets app wire a touch
of a small kick-file after each job's output is written; blackboxWorker
now polls that file's mtime alongside its normal adaptive timer and
syncs immediately on a kick instead of waiting out the current flush
period (up to 30s).
On multi-socket systems, run the NVIDIA bandwidth diagnostic once per
CPU socket before the all-GPU pass, so a crash confined to the all-GPU
run (with clean per-socket passes preceding it) isolates a cross-socket
peer-to-peer fault instead of leaving it conflated with a general
GPU/PCIe issue. Single-socket systems keep the original one-pass shape.
Also expand the support-bundle README with reference notes distilled
from a real analysis pass (BMC clock drift, "0/empty" tool output
meaning absent hardware rather than a fault, timestamp-matching before
assigning causality, and a normal-power-cycle SEL signature), plus a
step-by-step recipe for diagnosing an unexpected reboot/crash during a
specific test.
Memory used to render as one unattached row below the whole diagram
regardless of which socket it belonged to. schema.HardwareMemory has no
NUMANode field (unlike PCIe devices), so CPU affinity is instead read out of
the DIMM's own Locator string: either a CPU number encoded directly in it
("CPU0_DIMM_A1"), or — when the Locator has no CPU number of its own, e.g.
"DIMM000(A)" — a node number from Bank Locator ("_Node1_Channel0_Dimm0"),
read from the persisted dmidecode-type17.txt techdump the same way the
NVLink card already reads extra techdump for visualization only.
DIMMs that can't be attached to a column via either heuristic still fall
back to the old unattached "Memory" row so nothing silently disappears.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Storage acceptance runs already write disk-<prefix>-report.txt (per-drive
health + pseudographic resource bars) into the timestamped bee-sat run dir.
Also mirror it into techdump, a sibling of baseDir under the same export
dir, so a support bundle surfaces these reports alongside the rest of the
diagnostics without anyone having to dig into a specific bee-sat run dir.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Every place that surfaced a FAILED SAT result — task error messages,
component-status.json detail, and the hardware snapshot's ErrorDescription/
StatusHistory — used to say only "SAT overall_status=FAILED (see
summary.txt)" or "<label> failed", forcing an engineer to go dig through the
run directory to find out what actually broke.
nvidia-config's summary.txt now carries a "warnings" field with the specific
GPU/NVLink finding. A new SATFailureDetail/satFailureDetailFromKV in
component_status_db.go reads that field, or falls back to naming whichever
generic SAT sub-job(s) reported non-OK/UNSUPPORTED status along with their
exit code. This feeds both the task-runner error message and the component
status DB. sat_overlay.go's satKeyStatus (which drives ErrorDescription on
the exported hardware snapshot) now does the same, with storage kept
per-device so one drive's rc doesn't get attributed to another's card.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
An agent handed a bundle path had no way to know its layout without
grepping through random logs first — confirmed by watching a separate
session read bee-nvidia.log before anything else on a real bundle. Embeds
a single README.md (bee-embed, internal/app/assets/) explaining what bee
is and giving direct answers to the questions someone analyzing a bundle
is most likely to ask (did the tests pass, what hardware is this, is a
service healthy, RAID/GPU/NVLink state, etc), written at the bundle root
by both BuildSupportBundle (support-bundle archive root, sibling of
manifest.txt) and blackboxWorker.syncCycle (removable-media boot-folder
root, which otherwise has no manifest.txt-equivalent pointing anywhere).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The long-lived bee-web process (writing PSU/kmsg watchdog records ~every
60s) and each short-lived "bee bee-worker" SAT-task subprocess each held
an independent in-memory copy of component-status.json. Whichever saved
last won outright, silently erasing whatever the other had just written —
e.g. a GPU SAT task's pcie:gpu:nvidia result vanishing the next time the
PSU watchdog ticked. ComponentStatusDB.Record now reloads on-disk state
(keyed by newer LastCheckedAt) before merging its own update.
Also stops re-logging identical repeat observations to History: the
ingest contract defines status_history as a transition log ("История
переходов статусов"), not a per-poll journal, but Record appended one
entry per call regardless — a continuously-polled PSU grew an unbounded
run of identical "still OK" entries. Now only appends when a source's
last recorded status for a key actually changes.
The PSU watchdog itself now backs off (60s -> doubling, capped at 30min)
while steady and resets to 60s the moment any PSU's status changes, cutting
ipmitool shellouts and file writes for a fleet that's been stable for a
while.
Also adds the missing "raid" case to the component-detail API (was
returning 404 for any RAID card's detail click on /topo).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
PSU and firmware (BMC/BIOS) boxes were absolutely-positioned SVG rects in a
single fixed-width row with no wrap, so an arbitrary/larger count piled up
and overlapped once a board had more of either than fit in that row. Move
them to plain flex-wrap HTML below the diagram (Firmware row first, then
Power Supplies), which reflows naturally for any count. The main CPU/PCIe/
GPU diagram now scrolls horizontally (overflow-x:auto) instead of being
squashed to fit narrow viewports, matching the wide-table convention used
elsewhere in webui.
Also fixes a crash: renderTopoMainDiagram forced numCols to 1 for layout
purposes when a snapshot has zero CPUs, then unconditionally indexed
hw.CPUs[0], panicking the whole /topo page on any audit without CPU data.
Same-kind/same-column components (e.g. 4 GPUs in one NUMA node) now render
as one stacked card summarizing worst-case status plus a tally line ("3 OK,
1 Warning") instead of one box per component, and card severity coloring
uses real fill/stroke vars instead of HTML badge classes that don't apply
any style to SVG shapes.
- nvidia-smi underlines the topo -m header with ANSI CSI codes even when
writing to a file; both NVLink matrix parsers failed to find the header
and /topo showed "No NVLink-bonded GPU pairs found" on bonded systems.
- raid-lsi-create-mirror failed with "resources already in use" (exit 11)
on JBOD drives; the task now reads drive states and auto-converts
JBOD/UBad (set good force), releases hotspares, refuses Frgn/Onln with
actionable messages, and dumps preservedcache info when add vd fails.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
nvidia-smi exposes reset_status.reset_required and remapped_rows.* only on
newer drivers for Ampere+ GPUs; queried via a separate exec call since an
unrecognized field name fails the whole --query-gpu command and would have
wiped out unrelated telemetry (temp/ECC/power) on older drivers otherwise.
Also refines Xid severity in both the ingest dmesg collector and the
always-on kmsg watcher: Xid 64 (row-remap InfoROM write failure) now
escalates to Critical instead of the generic warning every other Xid got,
and fixes the SAT-window flush path which previously hardcoded "Warning"
and ignored pattern severity entirely.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
RAID Controller Management showed "No drives detected" for a live
SAS3808-iMR controller even though storcli64 clearly enumerates its
drives. Root cause: the "eall/sall show all J" drive-listing parser
(collector/raid.go and its webui/raid_mgmt.go duplicate) assumed
drives are reported as a single "Drive Information" array, but real
storcli64/storcli2 output nests each drive under its own dynamically
named key ("Drive /c0/e69/s0", paired with a "... - Detailed
Information" key) — confirmed against a live techdump/storcli64-drives.json
capture. The assumed shape was never actually produced by the tool, so
this affected every storcli64/storcli2 controller, not just Tri-Mode
ones (the storcli2 fallback added in b7f015c never got a chance to
mask it in practice, since storcli2 itself reports zero controllers on
this hardware — a separate, unrelated tool-side gap).
Both parsers now read "Response Data" as a raw key map and pull drives
from either shape, so older storcli output using the array form still
works alongside the real per-slot form.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
/topo blocked the HTTP request on live nvidia-smi calls with no timeout
(topo -m, nvlink -s/-e run on every page load), so a wedged driver hung
the page indefinitely. CaptureTechnicalDump now persists these dumps
once per audit cycle; the page reads them from techdump/ instead.
buildSocketIndex mapped NUMA node number to CPU by treating dmidecode's
Socket Designation (often 1-indexed, "CPU1"/"CPU2") as equal to the
NUMA node number (always 0-indexed) — GPUs/NICs on NUMA node 0 fell
into the "unknown" column, others attached to the wrong CPU box. Now
ranks CPUs by Socket value instead of assuming a shared numbering base.
Fixed a bug in ComponentStatusDB/applyComponentStatusDB where GPU SAT
results were keyed per-target ("pcie:gpu:nvidia-stress") instead of
per-vendor, which both broke cross-tier severity tracking (a later
clean "2. Check" run and an earlier failing "3. Load" run never
compared severities) and silently failed to match any real BDF, so the
DB overlay never reached the topology graph at all. GPU keys are now
normalized to vendor ("pcie:gpu:nvidia"/"pcie:gpu:amd"). Also skip
writing to the DB when a SAT task was aborted by the user (ctx
canceled), so a partial run can't stomp a previously recorded status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Covers the sat.go fix from 2599d9c: a failing "dcgmi discovery -l"
preflight job must not flip the pack's overall status, and jobs marked
with retries should recover from a transient first-attempt failure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a GPU Settings card to /tools for the settings that actually
persist on NVIDIA data-center GPUs: ECC mode, MIG mode, and
Confidential Computing mode (all stored in the GPU's inforom/firmware,
take effect after a GPU reset or reboot) plus power limit (does not
persist — reapplied on demand). Includes a one-click "Reset All to
Defaults" that restores factory settings across every visible GPU,
touching only whatever has actually drifted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
dcgmi discovery -l is a preflight/metadata step ahead of the real DCGM
diag jobs; a transient failure racing nv-hostengine startup shouldn't
flip the whole pack's status, so it's now marked informational with a
couple of retries. Separately, bound the fabricmanager/nvidia-dcgm
systemctl restart/start calls in bee-nvidia-load with a timeout so a
wedged unit (e.g. fabric training stuck on a bad NVSwitch fabric)
can't hang bee-nvidia.service forever and block dcgm from ever
starting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
storcli64 enumerates these controllers but reports zero drives; storcli2
is the tool Broadcom ships for Tri-Mode/MegaRAID8 hardware and uses a
compatible JSON schema for drive listing. Wires storcli2 into both the
collector (structured drive data) and the webui RAID Management page
(dedup so a controller isn't double-listed if storcli64 already sees it
with zero drives), plus techdump raw collection and the ISO vendor-tool
build step.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only visualization page: CPU sockets as anchor nodes, PCIe
devices (GPU/NIC/RAID) linked to their NUMA-affine socket with edge
color derived strictly from link_speed vs max_link_speed (not from the
device's own Status, which can also be overwritten by SAT-test results
on the same field), PSU/BMC as standalone boxes with no connecting
line, and a separate NVLink Topology card (live nvidia-smi topo -m /
nvlink -s/-e queries, not persisted to any contract).
GPU-GPU edges are drawn strictly from the actual bonded-pair list
parsed out of "nvidia-smi topo -m" (parseGPUPairAdjacency), not from
adjacent box position in the layout — an earlier ASCII mockup drew a
"chain" through unrelated GPUs, which a dedicated regression test now
guards against. A bonded pair spanning two different NUMA nodes is
flagged Warning on the edge and on both GPU boxes, per project
decision that this is an anomaly worth surfacing, not a neutral fact.
Zero changes to the ingest contract: this reverts the HardwareNVLinkPort/
HardwarePCIeDevice.NVLinks field shipped in v11.55 (33d6eee) along with
its collector/nvidia.go enrichment — that field risked a 400 from
Reanimator Core's strict decoder without an RFC, and isn't needed since
the topo page queries nvidia-smi directly instead of reading it from
audit.json. The v11.55 systemd fix (bee-nvidia.service ordering,
nv-hostengine restart) and the nvlink-status/-errors/dcgmi dumps in the
support bundle are untouched.
Also reorganizes support bundle collection per project convention:
system/ is now LiveCD-operational logs only (Xorg, services, console,
network/FS of the host itself); all server-hardware dumps (lspci,
NVIDIA/NVLink/DCGM, fabric manager, PCIe AER, ethtool, mstflint) move
to techdump/, deduplicating two entries already produced by
platform/techdump.go. Adds nvidia-bug-report.sh (previously only
collected inside the NVIDIA SAT pack) and lscpu to the always-on dump.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add NVLink port status (nvidia-smi nvlink -s), error counters
(nvidia-smi nvlink -e), and dcgmi nvlink status to the support bundle,
and enrich HardwarePCIeDevice entries with per-link telemetry.
Replace the raw nv-hostengine pkill/restart dance in bee-nvidia-load
with systemctl restart/start of nvidia-dcgm.service, and order
bee-nvidia.service Before= nvidia-dcgm.service and
nvidia-fabricmanager.service so modules/device nodes exist before
those units start.
dcgmi diag's failures only surface a terse wrapper message ("Detected
driver major version 0 is not between the required versions 346 and
2000"), which doesn't say why. Reading DCGM's own nvvs source
(NvidiaValidationSuite.cpp::CheckDriverVersion) shows this fires when
dcgmSystem.GetDeviceAttributes(0, ...) comes back empty — the version
string is never actually malformed. Diagnosing further requires info
bee never collected: whether dcgmi discovery even sees GPU 0/1
correctly, and nvvs's own internal debug log (normally
/var/log/nvidia-dcgm/nvvs.log, which bee never captured).
Add a "dcgmi discovery -l" job before every DCGM diag invocation
(check-gpu-dcgm-l2, nvbandwidth, targeted_power, pulse_test,
targeted_stress), and route dcgmi diag through
"-v -d DEBUG --debugLogFile {{run_dir}}/..." so the full nvvs debug
log lands in the SAT run dir and gets picked up by the support bundle
automatically, instead of needing a live SSH session on hardware we
usually can't get a second look at.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
extractArchivePath only stripped the "Archive written to " prefix when
the string ended in ".tar.gz", but SAT packs write bare run directories,
never actual tar.gz archives. Any task routed through an
ActionResult-wrapping pack function (e.g. RunNvidiaAcceptancePackWithOptions,
used by the DCGM L1-L4 diag task) passed the whole prefixed string into
ReadSATOverallStatus, which then failed to find summary.txt and silently
returned "", masking real job failures as task-level "done".
Strip the prefix directly instead of gating on a suffix that SAT run
dirs never have.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Flags GPUs that reach one or more peers only via a SYS-class PCIe hop
(crossing the CPU/NUMA-node boundary) in nvidia-smi topo -m. On servers
where GPUs are only bridged pairwise via NVLink bridge (no switched
NVLink fabric), this is the exact path that traffic between different
bridge pairs has to cross, and can cut multi-GPU throughput by 2x+ for
workloads spanning more than one pair.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Disk report now ends with a Conclusion section judging a drive NEW/USED
against loose thresholds (<110% capacity written, <210% read, <7d
uptime, <30 power cycles), listing which ones tripped. Data
Written/Read in the Usage section now scale to TB/PB via
formatBytesHuman instead of always printing raw GB. storageSATCommands
now runs smartctl with -i so SATA/SAS reports get Model/Serial/
Firmware/Capacity, which the Conclusion needs to evaluate the
write/read criteria (previously only -H -A was collected).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
nvme-cli emits large 64-bit counters as JSON-quoted strings on some
versions; the disk-report text generator only handled bare numbers and
{lo,hi} objects, so power_on_hours/data_units_read/data_units_written
etc. silently parsed as 0 while the structured collector path already
handled this correctly. Unify both paths on a single exported
JSONInt64/NVMeSmartLog/NVMeIDCtrl type in collector/storage.go instead
of keeping two independent nvme-cli JSON parsers in sync.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ramp Sequence table's Run 1 row showed "—" for GPU power because the
step-1 fast path (reusing single-card calibration) never populated
PerGPUTelemetry like steps 2+ do. Also add GPU total W / Server itself W
columns and an idle baseline row so server-vs-GPU consumption is visible
per ramp step.
Product Asset Tag (p 5) and the repeated custom "Extra" fields (Product
Extra p 7, Board Extra b 5/6/7, Chassis Extra c 2/3) from the Inspur FRU
field doc weren't writable — ipmitool prints identically-named lines for
each custom field with no index of its own, so a plain name lookup
couldn't tell them apart. parseFRUOutput now counts occurrences per area
to recover the real index, and the existing area/index round-trip in the
FRU editor write path picks it up automatically. Out-of-band (-H/-U/-P)
writing remains out of scope.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
smartctl -t short only launches the self-test and returns immediately
("Testing has begun"); unlike nvme device-self-test --wait, it has no
blocking mode. Validate/Load runs closed the task and produced reports
before the drive actually finished the test. Now poll smartctl -a until
the test completes (or times out) and report the real result.
Also add a per-disk "Resource" section with pseudographic progress bars
for uptime (vs 5y design life), bytes written (vs 1 DWPD x 5y budget),
and bytes read (percent from SMART attribute 242), all rendered in
human-scaled units (days/years, TB/PB) instead of raw hour/byte counts.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
RAID Controller Management previously hid any LSI drive that wasn't
already Frgn/UGood/JBOD, and scoped VROC "free drives" from all system
disks instead of the ones actually wired to the VROC controller's
ports - drives attached directly to the CPU or another HBA could leak
in. Now every drive is listed per its own controller, and LSI drives
not already ready for array creation get a "Prepare" button that
forces them to Unconfigured Good via storcli.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Check mode: read-only SMART/NVMe data collection, no self-test.
Load mode: same collection + short self-test (nvme device-self-test -s 1,
smartctl -t short). Card descriptions updated accordingly.
After each storage SAT run, a disk-N-devname-report.txt is written
per device into the runDir (auto-included in support bundles).
Web UI task page renders one card per disk directly below Task Report.
Also fixes pre-existing TestDashboardRendersRuntimeHealthTable failure:
test fixture used "inactive" status but code now treats inactive as OK
for completed oneshot services; updated to "failed" to match intent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Show an explicit per-source status line after "Read All" instead of hiding
failed/blocked sources in a "(skipped: …)" tail. Sources blocked by a missing
Supermicro license (SFT-OOB-LIC / SFT-DCMS-SINGLE) are flagged in red with an
actionable message, so engineers see that SAA DMI is gated rather than silently
falling back to the futile ipmitool FRU path (BIOS re-syncs FRU from DMI on boot).
Also fix TestDashboardRendersRuntimeHealthTable, stale since 4f6579e moved
"inactive" to the OK service states: the fixture now uses a failed service and
the assertion matches the current contract (failed flagged, inactive not).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replaces separate IPMI FRU and SAA DMI cards with a single FRU / Elabel
card that reads all available sources in parallel and shows each field
with a color-coded source chip (IPMI FRU / Huawei iBMC / SAA DMI).
Huawei elabel fields are read/written via OEM IPMI raw commands
(NetFn 0x30, cmd 0x90) with 19-byte chunking protocol, matching
the FusionServer ElabelTool V511 wire format. Covers DeviceName,
DeviceSerialNumber, ProductName, ProductSerialNumber, ProductAssetTag,
ProductManufacturer, MainboardManufacturer, BoardProductName,
ChassisPartnumber, ChassisType (read-only), IOChassisSerial,
IOChassisAssetTag, and GUID (read-only via standard 0x06 0x08).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- sat.go: DetectGPUVendor lspci fallback now checks GPU device classes
([0300]/[0302]/[0380]) per line instead of scanning the whole output for
vendor name; AMD EPYC servers have dozens of AMD-branded PCIe entries
(Root Complex, IOMMU, Host Bridge) that were triggering the old check
- blackbox.go: fix deadlock in finishCycle — it held w.mu while calling
persistState(), which acquires rt.mu then re-acquires w.mu inside
persistStateLocked(); now w.mu is released before persistState()
- build.sh: remove NVIDIA-specific overlay files (bee-gpu-burn,
bee-john-gpu-stress, bee-nccl-gpu-stress, bee-nvidia-recover,
bee-dcgmproftester-staggered, bee-check-nvswitch,
nvidia-fabricmanager.service.d/) for non-nvidia build variants
- bee-selfheal: gate NVIDIA recovery on BEE_GPU_VENDOR=nvidia so the
script does not attempt to restart bee-nvidia.service on NOGPU builds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace global Save button with per-row ✓ (save) / ✗ (cancel) buttons
that appear only when a field is changed
- All fields shown as editable inputs; server rejects unknown fields
with a clear error message instead of hiding them in the UI
- Monospace font and 1.5px border for all value inputs
- Server-side name→area/index lookup for fields sent without area
- SAA DMI card: same per-row UX, confirm dialog kept (requires reboot)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ipmitool fru print on some BMC implementations returns short names
("Chassis Serial", "Board Mfg", "Board Product", "Board Serial",
"Product Serial") instead of the full names in the vendor doc.
Add both variants to fruEditableFields so all fields are editable
regardless of which naming convention the BMC uses.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
POST /api/system/reboot → systemctl reboot
POST /api/system/shutdown → systemctl poweroff
Both require confirm() before executing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The USB Black-Box card already provides enable/disable per device.
The standalone Blackbox Logging card was non-functional and redundant.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Unified card for LSI/Broadcom and Intel VROC controllers: auto-detects
foreign configurations and warns the operator with Import/Clear actions;
allows creating RAID 1 mirrors from unconfigured drives regardless of
controller type. Live output streams via SSE into an inline terminal.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- audit JSON: IPMI sensor readings (ipmitool sensor) merged into hardware.sensors alongside lm-sensors data
- audit JSON: IPMI SEL entries (ipmitool sel list) in hardware.event_logs with source "ipmi-sel"
- audit JSON: dmesg error/warning lines in hardware.event_logs with source "dmesg" (filtered by error/warn/AER/Xid/NVRM/ECC/panic patterns)
- support bundle: added ipmitool-sensor.txt, ipmitool-sel.txt, ipmitool-sel-time.txt to techdump
- saa_dmi.go: fix dmiItemRE to accept SHN with parentheses (e.g. PS(4)LC for PSU fields)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- saa_dmi.go: set cmd.Dir=/usr/local/bin on all saa exec calls so
acpica_bin/acpidump is found relative to correct working directory
- build.sh: copy all saa companion dirs (acpica_bin, ExternalData,
tool, stunnel, GO_SNMP) to /usr/local/bin/ preserving structure
- iso/vendor: add acpica_bin/acpiexec, ExternalData/, tool/gpu/nVidia/x64/,
tool/USBController/, stunnel/, GO_SNMP/ from SAA 1.5.0 release package
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Check (2): validate mode only — no mode switcher, no stress-only cards
(nvidia-targeted-stress, nvidia-targeted-power, nvidia-pulse hidden)
- Load (3): stress mode only — no mode switcher, all cards shown
- satStressMode() hardcoded per page; satModeChanged() removed
- Profile card with radio buttons removed from both pages
- Replaced with simple Run All button + est. time
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove "6." / "7." prefixes from Tools and Settings nav labels and page titles
- Add a horizontal separator (nav-sep) before the Tools/Settings group
- Move Tasks into the nav as a regular nav-item after the separator,
replacing the separate tasks-nav-btn at the sidebar bottom
- Tasks item retains the active-count badge (tasks-nav-count)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tools page now contains only NVMe Block Format and Supermicro - DMI.
Moved to Settings (7):
- System Install (Install to RAM + Install to Disk)
- Support Bundle + USB Black-Box
- Tool Check
- NVIDIA Self Heal (replaces simple NVIDIA Recovery card)
- Network
- Services
Update TestToolsPageRendersNvidiaSelfHealSection to assert the moved
cards on /settings instead of /tools.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
