NVIDIA GPUs deliberately downclock PCIe to Gen1 at idle for power
saving, and applyPCIeLinkSpeedWarning fired on every idle collector
pass regardless - since component-status DB records never downgrade
(Record() only ever raises severity), one boot-time idle sample
permanently pinned pcie:gpu:nvidia to Warning for the rest of the
session even after every load-bearing GPU SAT test passed clean. Two
prior fixes (nvidia-smi-sourced link speed, pcie_aspm=off boot flag)
didn't hold up against this hardware/driver combination - see
bible-local/decisions/2026-08-24-pcie-gpu-gen1-idle-warning.md for the
full history.
Rather than add a downgrade path, stop writing an unverified status in
the first place: parseLspciDevice no longer calls
applyPCIeLinkSpeedWarning on the idle path. LinkSpeed/MaxLinkSpeed stay
populated as plain descriptive fields; only a verified-under-load
caller may now turn them into a status verdict.
Two new SAT targets provide that verified signal:
- pcie-link (platform/pcie_link_check.go): forces every enabled PCIe
device - not just GPUs - to retrain via the PCIe spec's Link Control
"Retrain Link" bit, then compares the negotiated speed against the
device's max. Covers NICs/HBAs/switches that have no bee-gpu-burn
equivalent load tool. Classifies by PCI class code + vendor ID, not
name substrings. Routes gpu_nvidia/gpu_amd/other sub-verdicts into
their own component-status keys so a degraded NIC never reads as a
GPU fault.
- nvidia-pcie-bandwidth (platform/nvidia_pcie_bandwidth.go): drives
real host<->device traffic via dcgmi diag -r nvbandwidth and
resamples link speed immediately after, independent of nvbandwidth's
own pass/fail.
Both wired into the task queue/webui the same way as nvidia-config
(routes, dispatch, priority, Validate page cards, Run All Check SAT).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Exposes the scenario engine (platform.System.RunScenario, added earlier)
in the web UI instead of only the `bee run` CLI: a new nav item lists every
scenarios/*.json found on mounted removable media (GET /api/scenario/list)
and runs one with a click (POST /api/scenario/run), enqueued as a normal
Task with target "scenario" — progress/logs live in Tasks like any other
SAT pack, no separate live-output UI needed.
- app.go: satRunner gains RunScenario, exportManager gains
ListScenarioFilesOnRemovableMedia/ReadScenarioFromRemovableMedia — both
already implemented on platform.System, just newly exposed through App.
- webui/tasks.go: taskParams.ScenarioName; runTask's "scenario" case reads
the file from removable media, parses it, and runs it.
- webui/page_scenario.go: the page itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a GPU Settings card to /tools for the settings that actually
persist on NVIDIA data-center GPUs: ECC mode, MIG mode, and
Confidential Computing mode (all stored in the GPU's inforom/firmware,
take effect after a GPU reset or reboot) plus power limit (does not
persist — reapplied on demand). Includes a one-click "Reset All to
Defaults" that restores factory settings across every visible GPU,
touching only whatever has actually drifted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A (hardware-ingest-json v2.8-2.9): remove sensor location fields from schema
and collector; tag HardwareMemory.Location as json:"-"; add PlatformConfig to
HardwareSnapshot.
B (no-hardcoded-vendors): consolidate PCI vendor IDs into collector/pci_vendors.go;
replace all vendor-name string checks in isGPUDevice, isNVIDIADevice, isMellanoxDevice,
isAMDGPUDevice, matchesGPUVendor (sat_overlay), and validateIsVendorGPU (page_validate)
with numeric vendor_id comparisons.
C (module-structure): split app/app.go (1413 lines) into app.go + app_format.go,
app_network.go, app_services.go, app_packs.go, app_install.go — no logic changes.
D (go-code-style): wrap bare return err in interfaceAdminState and
interfaceIPv4Addrs (platform/network.go) with fmt.Errorf context including
the interface name.
E (go-project-bible): add bible-local/architecture/data-model.md and
bible-local/architecture/api-surface.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mchusandClaude Sonnet 4.6