Every place that surfaced a FAILED SAT result — task error messages,
component-status.json detail, and the hardware snapshot's ErrorDescription/
StatusHistory — used to say only "SAT overall_status=FAILED (see
summary.txt)" or "<label> failed", forcing an engineer to go dig through the
run directory to find out what actually broke.
nvidia-config's summary.txt now carries a "warnings" field with the specific
GPU/NVLink finding. A new SATFailureDetail/satFailureDetailFromKV in
component_status_db.go reads that field, or falls back to naming whichever
generic SAT sub-job(s) reported non-OK/UNSUPPORTED status along with their
exit code. This feeds both the task-runner error message and the component
status DB. sat_overlay.go's satKeyStatus (which drives ErrorDescription on
the exported hardware snapshot) now does the same, with storage kept
per-device so one drive's rc doesn't get attributed to another's card.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
An agent handed a bundle path had no way to know its layout without
grepping through random logs first — confirmed by watching a separate
session read bee-nvidia.log before anything else on a real bundle. Embeds
a single README.md (bee-embed, internal/app/assets/) explaining what bee
is and giving direct answers to the questions someone analyzing a bundle
is most likely to ask (did the tests pass, what hardware is this, is a
service healthy, RAID/GPU/NVLink state, etc), written at the bundle root
by both BuildSupportBundle (support-bundle archive root, sibling of
manifest.txt) and blackboxWorker.syncCycle (removable-media boot-folder
root, which otherwise has no manifest.txt-equivalent pointing anywhere).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The long-lived bee-web process (writing PSU/kmsg watchdog records ~every
60s) and each short-lived "bee bee-worker" SAT-task subprocess each held
an independent in-memory copy of component-status.json. Whichever saved
last won outright, silently erasing whatever the other had just written —
e.g. a GPU SAT task's pcie:gpu:nvidia result vanishing the next time the
PSU watchdog ticked. ComponentStatusDB.Record now reloads on-disk state
(keyed by newer LastCheckedAt) before merging its own update.
Also stops re-logging identical repeat observations to History: the
ingest contract defines status_history as a transition log ("История
переходов статусов"), not a per-poll journal, but Record appended one
entry per call regardless — a continuously-polled PSU grew an unbounded
run of identical "still OK" entries. Now only appends when a source's
last recorded status for a key actually changes.
The PSU watchdog itself now backs off (60s -> doubling, capped at 30min)
while steady and resets to 60s the moment any PSU's status changes, cutting
ipmitool shellouts and file writes for a fleet that's been stable for a
while.
Also adds the missing "raid" case to the component-detail API (was
returning 404 for any RAID card's detail click on /topo).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
/topo blocked the HTTP request on live nvidia-smi calls with no timeout
(topo -m, nvlink -s/-e run on every page load), so a wedged driver hung
the page indefinitely. CaptureTechnicalDump now persists these dumps
once per audit cycle; the page reads them from techdump/ instead.
buildSocketIndex mapped NUMA node number to CPU by treating dmidecode's
Socket Designation (often 1-indexed, "CPU1"/"CPU2") as equal to the
NUMA node number (always 0-indexed) — GPUs/NICs on NUMA node 0 fell
into the "unknown" column, others attached to the wrong CPU box. Now
ranks CPUs by Socket value instead of assuming a shared numbering base.
Fixed a bug in ComponentStatusDB/applyComponentStatusDB where GPU SAT
results were keyed per-target ("pcie:gpu:nvidia-stress") instead of
per-vendor, which both broke cross-tier severity tracking (a later
clean "2. Check" run and an earlier failing "3. Load" run never
compared severities) and silently failed to match any real BDF, so the
DB overlay never reached the topology graph at all. GPU keys are now
normalized to vendor ("pcie:gpu:nvidia"/"pcie:gpu:amd"). Also skip
writing to the DB when a SAT task was aborted by the user (ctx
canceled), so a partial run can't stomp a previously recorded status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a GPU Settings card to /tools for the settings that actually
persist on NVIDIA data-center GPUs: ECC mode, MIG mode, and
Confidential Computing mode (all stored in the GPU's inforom/firmware,
take effect after a GPU reset or reboot) plus power limit (does not
persist — reapplied on demand). Includes a one-click "Reset All to
Defaults" that restores factory settings across every visible GPU,
touching only whatever has actually drifted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only visualization page: CPU sockets as anchor nodes, PCIe
devices (GPU/NIC/RAID) linked to their NUMA-affine socket with edge
color derived strictly from link_speed vs max_link_speed (not from the
device's own Status, which can also be overwritten by SAT-test results
on the same field), PSU/BMC as standalone boxes with no connecting
line, and a separate NVLink Topology card (live nvidia-smi topo -m /
nvlink -s/-e queries, not persisted to any contract).
GPU-GPU edges are drawn strictly from the actual bonded-pair list
parsed out of "nvidia-smi topo -m" (parseGPUPairAdjacency), not from
adjacent box position in the layout — an earlier ASCII mockup drew a
"chain" through unrelated GPUs, which a dedicated regression test now
guards against. A bonded pair spanning two different NUMA nodes is
flagged Warning on the edge and on both GPU boxes, per project
decision that this is an anomaly worth surfacing, not a neutral fact.
Zero changes to the ingest contract: this reverts the HardwareNVLinkPort/
HardwarePCIeDevice.NVLinks field shipped in v11.55 (33d6eee) along with
its collector/nvidia.go enrichment — that field risked a 400 from
Reanimator Core's strict decoder without an RFC, and isn't needed since
the topo page queries nvidia-smi directly instead of reading it from
audit.json. The v11.55 systemd fix (bee-nvidia.service ordering,
nv-hostengine restart) and the nvlink-status/-errors/dcgmi dumps in the
support bundle are untouched.
Also reorganizes support bundle collection per project convention:
system/ is now LiveCD-operational logs only (Xorg, services, console,
network/FS of the host itself); all server-hardware dumps (lspci,
NVIDIA/NVLink/DCGM, fabric manager, PCIe AER, ethtool, mstflint) move
to techdump/, deduplicating two entries already produced by
platform/techdump.go. Adds nvidia-bug-report.sh (previously only
collected inside the NVIDIA SAT pack) and lscpu to the always-on dump.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add NVLink port status (nvidia-smi nvlink -s), error counters
(nvidia-smi nvlink -e), and dcgmi nvlink status to the support bundle,
and enrich HardwarePCIeDevice entries with per-link telemetry.
Replace the raw nv-hostengine pkill/restart dance in bee-nvidia-load
with systemctl restart/start of nvidia-dcgm.service, and order
bee-nvidia.service Before= nvidia-dcgm.service and
nvidia-fabricmanager.service so modules/device nodes exist before
those units start.
extractArchivePath only stripped the "Archive written to " prefix when
the string ended in ".tar.gz", but SAT packs write bare run directories,
never actual tar.gz archives. Any task routed through an
ActionResult-wrapping pack function (e.g. RunNvidiaAcceptancePackWithOptions,
used by the DCGM L1-L4 diag task) passed the whole prefixed string into
ReadSATOverallStatus, which then failed to find summary.txt and silently
returned "", masking real job failures as task-level "done".
Strip the prefix directly instead of gating on a suffix that SAT run
dirs never have.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- sat.go: DetectGPUVendor lspci fallback now checks GPU device classes
([0300]/[0302]/[0380]) per line instead of scanning the whole output for
vendor name; AMD EPYC servers have dozens of AMD-branded PCIe entries
(Root Complex, IOMMU, Host Bridge) that were triggering the old check
- blackbox.go: fix deadlock in finishCycle — it held w.mu while calling
persistState(), which acquires rt.mu then re-acquires w.mu inside
persistStateLocked(); now w.mu is released before persistState()
- build.sh: remove NVIDIA-specific overlay files (bee-gpu-burn,
bee-john-gpu-stress, bee-nccl-gpu-stress, bee-nvidia-recover,
bee-dcgmproftester-staggered, bee-check-nvswitch,
nvidia-fabricmanager.service.d/) for non-nvidia build variants
- bee-selfheal: gate NVIDIA recovery on BEE_GPU_VENDOR=nvidia so the
script does not attempt to restart bee-nvidia.service on NOGPU builds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
A (hardware-ingest-json v2.8-2.9): remove sensor location fields from schema
and collector; tag HardwareMemory.Location as json:"-"; add PlatformConfig to
HardwareSnapshot.
B (no-hardcoded-vendors): consolidate PCI vendor IDs into collector/pci_vendors.go;
replace all vendor-name string checks in isGPUDevice, isNVIDIADevice, isMellanoxDevice,
isAMDGPUDevice, matchesGPUVendor (sat_overlay), and validateIsVendorGPU (page_validate)
with numeric vendor_id comparisons.
C (module-structure): split app/app.go (1413 lines) into app.go + app_format.go,
app_network.go, app_services.go, app_packs.go, app_install.go — no logic changes.
D (go-code-style): wrap bare return err in interfaceAdminState and
interfaceIPv4Addrs (platform/network.go) with fmt.Errorf context including
the interface name.
E (go-project-bible): add bible-local/architecture/data-model.md and
bible-local/architecture/api-surface.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- nvidia.go: add Name field to nvidiaGPUInfo, include model name in
nvidia-smi query, set dev.Model in enrichPCIeWithNVIDIAData
- pages.go: fix duplicate GPU count in validate card summary (4 GPU: 4 x …
→ 4 x … GPU); fix PSU UNKNOWN fallback from hw.PowerSupplies; treat
activating/deactivating/reloading service states as OK in Runtime Health
- support_bundle.go: use "150405" time format (no colons) for exFAT compat
- sat.go / benchmark.go / platform_stress.go / sat_fan_stress.go: remove
.tar.gz archive creation from export dirs — export packs everything itself
- charts_svg.go: add min-max downsampling (1400 pt cap) for SVG chart perf
- benchmark_report.go / sat.go: normalize GPU fallback to "Unknown GPU"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Runtime Health now shows only LiveCD system status (services, tools,
drivers, network, CUDA/ROCm) — hardware component rows removed
- Hardware Summary now shows server components with readable descriptions
(model, count×size) and component-status.json health badges
- Add Network Adapters row to Hardware Summary
- SFP module static info (vendor, PN, SN, connector, type, wavelength)
now collected via ethtool -m regardless of carrier state
- PSU statuses from IPMI audit written to component-status.json so PSU
badge shows actual status after first audit instead of UNKNOWN
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Bootloader: GRUB fallback text colors → yellow/brown (amber tone)
- CLI charts: all GPU metric series use single amber color (xterm-256 #214)
- Wallpaper: logo width scaled to 400 px dynamically, shadow scales with font size
- Support bundle: renamed to YYYY-MM-DD (BEE-SP vX.X) SRV_MODEL SRV_SN ToD.tar.gz
using dmidecode for server model (spaces→underscores) and serial number
- Remove display resolution feature (UI card, API routes, handlers, tests)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HPL 2.3 from netlib compiled against OpenBLAS with a minimal
single-process MPI stub — no MPI package required in the ISO.
Matrix size is auto-sized to 80% of total RAM at runtime.
Build:
- VERSIONS: HPL_VERSION=2.3, HPL_SHA256=32c5c17d…
- build-hpl.sh: downloads HPL + OpenBLAS from Debian 12 repo,
compiles xhpl with a self-contained mpi_stub.c
- build.sh: step 80-hpl, injects xhpl + libopenblas into overlay
Runtime:
- bee-hpl: generates HPL.dat (N auto from /proc/meminfo, NB=256,
P=1 Q=1), runs xhpl, prints standard WR... Gflops output
- platform/hpl.go: RunHPL(), parses WR line → GFlops + PASSED/FAILED
- tasks.go: target "hpl"
- pages.go: LINPACK (HPL) card in validate/stress grid (stress-only)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace diag level 1-4 dropdown with Validate/Stress radio buttons
- Validate: dcgmi L2, 60s CPU, 256MB/1p memtester, SMART short
- Stress: dcgmi L3 + targeted_stress in Run All, 30min CPU, 1GB/3p memtester, SMART long/NVMe extended
- Parallel GPU mode: spawn single task for all GPUs instead of splitting per model
- Benchmark table: per-GPU columns for sequential runs, server-wide column for parallel
- Benchmark report converted to Markdown with server model, GPU model, version in header; only steady-state charts
- Fix IPMI power parsing in benchmark (was looking for 'Current Power', correct field is 'Instantaneous power reading')
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add platform/error_patterns.go: pluggable table of kernel log patterns
(NVIDIA/GPU, PCIe AER, storage I/O, MCE, EDAC) — extend by adding one struct
- Add app/component_status_db.go: persistent JSON store (component-status.json)
keyed by "pcie:BDF", "storage:dev", "cpu:all", "memory:all"; OK never
downgrades Warning or Critical
- Add webui/kmsg_watcher.go: goroutine reads /dev/kmsg during SAT tasks,
writes Warning to DB for matched hardware errors
- Fix task status: overall_status=FAILED in summary.txt now marks task failed
- Audit routine overlays component DB statuses into bee-audit.json on every read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Runs CPU (stressapptest) + GPU stress simultaneously across multiple
load/idle cycles with varying idle durations (120s/60s/30s) to detect
cooling systems that fail to recover under repeated load.
Presets: smoke (~5 min), acceptance (~25 min), overnight (~100 min).
Outputs metrics.csv + summary.txt with per-cycle throttle and fan
spindown analysis, packed as tar.gz.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace raw systemctl output in table cell with:
- state badge (active/failed/inactive) — click to expand
- full systemctl status in collapsible pre block (max 200px scroll)
Fixes layout explosion from multi-line status text in table.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Copies the live system to a local disk via unsquashfs — no debootstrap,
no network required. Supports UEFI (GPT+EFI) and BIOS (MBR) layouts.
ISO:
- Add squashfs-tools, parted, grub-pc, grub-efi-amd64 to package list
- New overlay script bee-install: partitions, formats, unsquashfs,
writes fstab, runs grub-install+update-grub in chroot
Go TUI:
- Settings → Tools submenu (Install to disk, Check tools)
- Disk picker screen: lists non-USB, non-boot disks via lsblk
- Confirm screen warns about data loss
- Runs with live progress tail of /tmp/bee-install.log
- platform/install.go: ListInstallDisks, InstallToDisk, findLiveBootDevice
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mchusandClaude Sonnet 4.6