NVIDIA GPUs deliberately downclock PCIe to Gen1 at idle for power
saving, and applyPCIeLinkSpeedWarning fired on every idle collector
pass regardless - since component-status DB records never downgrade
(Record() only ever raises severity), one boot-time idle sample
permanently pinned pcie:gpu:nvidia to Warning for the rest of the
session even after every load-bearing GPU SAT test passed clean. Two
prior fixes (nvidia-smi-sourced link speed, pcie_aspm=off boot flag)
didn't hold up against this hardware/driver combination - see
bible-local/decisions/2026-08-24-pcie-gpu-gen1-idle-warning.md for the
full history.
Rather than add a downgrade path, stop writing an unverified status in
the first place: parseLspciDevice no longer calls
applyPCIeLinkSpeedWarning on the idle path. LinkSpeed/MaxLinkSpeed stay
populated as plain descriptive fields; only a verified-under-load
caller may now turn them into a status verdict.
Two new SAT targets provide that verified signal:
- pcie-link (platform/pcie_link_check.go): forces every enabled PCIe
device - not just GPUs - to retrain via the PCIe spec's Link Control
"Retrain Link" bit, then compares the negotiated speed against the
device's max. Covers NICs/HBAs/switches that have no bee-gpu-burn
equivalent load tool. Classifies by PCI class code + vendor ID, not
name substrings. Routes gpu_nvidia/gpu_amd/other sub-verdicts into
their own component-status keys so a degraded NIC never reads as a
GPU fault.
- nvidia-pcie-bandwidth (platform/nvidia_pcie_bandwidth.go): drives
real host<->device traffic via dcgmi diag -r nvbandwidth and
resamples link speed immediately after, independent of nvbandwidth's
own pass/fail.
Both wired into the task queue/webui the same way as nvidia-config
(routes, dispatch, priority, Validate page cards, Run All Check SAT).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The Scenario page's Run button enqueued a task with target "scenario" that
never launched any load: the queue runs each task in an external
bee-worker subprocess (RunPersistedTask -> executeTaskWithOptions in
task_runner.go), whose target switch had no "scenario" case, so the task
died with "unknown target: scenario". The case had only been added to
taskQueue.runTask's switch in tasks.go — a stale copy exercised solely by
unit tests, which is why the tests passed while the button did nothing.
Add the "scenario" case (ReadScenario -> ParseScenarioJSON -> RunScenario)
to executeTaskWithOptions, and collapse runTask into a thin delegate to it
so there is a single target dispatch. The old runTask switch had already
drifted into a subset (missing nvme-format, *-write, raid-*, nvidia-config,
...); removing it eliminates the divergence that hid this bug. Also drop the
now-orphaned taskQueue.statusDB helper.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
platform.LocalScenariosDir (/usr/share/bee/scenarios, populated from
iso/overlay/usr/share/bee/scenarios/ by build.sh's overlay rsync) is now
checked before removable media for both `bee run <name>` and the "6.
Scenario" page — a scenario shipped with the image works with no USB
stick required. ReadScenario/ListAvailableScenarios merge local + USB;
the removable-media-only functions from the previous commit are kept
as-is (still used directly where that's actually what's wanted) rather
than renamed out from under existing callers/tests.
iso/overlay/usr/share/bee/scenarios/nvbandwidth-all-gpu-power-watch.json
is a copy of scenarios/nvbandwidth-all-gpu-power-watch.json — the two
aren't auto-synced (documented in scenarios/README.md), so shipping a
scenario baked-in means checking it into both places.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Exposes the scenario engine (platform.System.RunScenario, added earlier)
in the web UI instead of only the `bee run` CLI: a new nav item lists every
scenarios/*.json found on mounted removable media (GET /api/scenario/list)
and runs one with a click (POST /api/scenario/run), enqueued as a normal
Task with target "scenario" — progress/logs live in Tasks like any other
SAT pack, no separate live-output UI needed.
- app.go: satRunner gains RunScenario, exportManager gains
ListScenarioFilesOnRemovableMedia/ReadScenarioFromRemovableMedia — both
already implemented on platform.System, just newly exposed through App.
- webui/tasks.go: taskParams.ScenarioName; runTask's "scenario" case reads
the file from removable media, parses it, and runs it.
- webui/page_scenario.go: the page itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Every place that surfaced a FAILED SAT result — task error messages,
component-status.json detail, and the hardware snapshot's ErrorDescription/
StatusHistory — used to say only "SAT overall_status=FAILED (see
summary.txt)" or "<label> failed", forcing an engineer to go dig through the
run directory to find out what actually broke.
nvidia-config's summary.txt now carries a "warnings" field with the specific
GPU/NVLink finding. A new SATFailureDetail/satFailureDetailFromKV in
component_status_db.go reads that field, or falls back to naming whichever
generic SAT sub-job(s) reported non-OK/UNSUPPORTED status along with their
exit code. This feeds both the task-runner error message and the component
status DB. sat_overlay.go's satKeyStatus (which drives ErrorDescription on
the exported hardware snapshot) now does the same, with storage kept
per-device so one drive's rc doesn't get attributed to another's card.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
/topo blocked the HTTP request on live nvidia-smi calls with no timeout
(topo -m, nvlink -s/-e run on every page load), so a wedged driver hung
the page indefinitely. CaptureTechnicalDump now persists these dumps
once per audit cycle; the page reads them from techdump/ instead.
buildSocketIndex mapped NUMA node number to CPU by treating dmidecode's
Socket Designation (often 1-indexed, "CPU1"/"CPU2") as equal to the
NUMA node number (always 0-indexed) — GPUs/NICs on NUMA node 0 fell
into the "unknown" column, others attached to the wrong CPU box. Now
ranks CPUs by Socket value instead of assuming a shared numbering base.
Fixed a bug in ComponentStatusDB/applyComponentStatusDB where GPU SAT
results were keyed per-target ("pcie:gpu:nvidia-stress") instead of
per-vendor, which both broke cross-tier severity tracking (a later
clean "2. Check" run and an earlier failing "3. Load" run never
compared severities) and silently failed to match any real BDF, so the
DB overlay never reached the topology graph at all. GPU keys are now
normalized to vendor ("pcie:gpu:nvidia"/"pcie:gpu:amd"). Also skip
writing to the DB when a SAT task was aborted by the user (ctx
canceled), so a partial run can't stomp a previously recorded status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
RAID Controller Management previously hid any LSI drive that wasn't
already Frgn/UGood/JBOD, and scoped VROC "free drives" from all system
disks instead of the ones actually wired to the VROC controller's
ports - drives attached directly to the CPU or another HBA could leak
in. Now every drive is listed per its own controller, and LSI drives
not already ready for array creation get a "Prepare" button that
forces them to Unconfigured Good via storcli.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces separate IPMI FRU and SAA DMI cards with a single FRU / Elabel
card that reads all available sources in parallel and shows each field
with a color-coded source chip (IPMI FRU / Huawei iBMC / SAA DMI).
Huawei elabel fields are read/written via OEM IPMI raw commands
(NetFn 0x30, cmd 0x90) with 19-byte chunking protocol, matching
the FusionServer ElabelTool V511 wire format. Covers DeviceName,
DeviceSerialNumber, ProductName, ProductSerialNumber, ProductAssetTag,
ProductManufacturer, MainboardManufacturer, BoardProductName,
ChassisPartnumber, ChassisType (read-only), IOChassisSerial,
IOChassisAssetTag, and GUID (read-only via standard 0x06 0x08).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Unified card for LSI/Broadcom and Intel VROC controllers: auto-detects
foreign configurations and warns the operator with Import/Clear actions;
allows creating RAID 1 mirrors from unconfigured drives regardless of
controller type. Live output streams via SSE into an inline terminal.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a new card to the web UI Tools page for reading and editing DMI
fields via SAA (In-Band). Reads current DMI configuration with GetDmiInfo,
displays all fields as an editable table, and applies only the changed
fields via EditDmiInfo + ChangeDmiInfo. Backs up the original DMI file to
dmi-backups/ before any write, making it available in the support bundle
for rollback. Also adds "saa" to the standard tool check list.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- grub.cfg: add "load to RAM (toram)" entry to advanced submenu
- install_to_ram.go: resume from existing /dev/shm/bee-live copy if
source medium is unavailable after bee-web restart
- tasks.go: fix "Recovered after bee-web restart" shown on every run
(check j.lines before first append, not after)
- bee-install: retry unsquashfs up to 5x with wait-for-remount on
source loss; clear error message with bee-remount-medium hint
- bee-remount-medium: new script to find and remount live ISO source
after USB/CD reconnect; supports --wait polling mode
- 9000-bee-setup: chmod +x for bee-install and bee-remount-medium
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add RampStep/RampTotal/RampRunID to NvidiaBenchmarkOptions, taskParams, and
NvidiaBenchmarkResult so ramp-up steps can be correlated across result.json files
- Add ScalabilityScore field to NvidiaBenchmarkResult (placeholder; computed externally
by comparing ramp-up step results sharing the same ramp_run_id)
- Propagate ramp fields through api.go (generates shared ramp_run_id at spawn time),
tasks.go handler, and benchmark.go result population
- Apply ServerPower penalty to CompositeScore when IPMI reporting_ratio < 0.75:
factor = ratio/0.75, applied per-GPU with a note explaining the reduction
- Add finding when server power delta exceeds GPU-reported sum by >25% (non-GPU draw)
- Report header now shows ramp step N/M and run ID instead of "parallel" when in ramp mode;
shows scalability_score when non-zero
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HPL 2.3 from netlib compiled against OpenBLAS with a minimal
single-process MPI stub — no MPI package required in the ISO.
Matrix size is auto-sized to 80% of total RAM at runtime.
Build:
- VERSIONS: HPL_VERSION=2.3, HPL_SHA256=32c5c17d…
- build-hpl.sh: downloads HPL + OpenBLAS from Debian 12 repo,
compiles xhpl with a self-contained mpi_stub.c
- build.sh: step 80-hpl, injects xhpl + libopenblas into overlay
Runtime:
- bee-hpl: generates HPL.dat (N auto from /proc/meminfo, NB=256,
P=1 Q=1), runs xhpl, prints standard WR... Gflops output
- platform/hpl.go: RunHPL(), parses WR line → GFlops + PASSED/FAILED
- tasks.go: target "hpl"
- pages.go: LINPACK (HPL) card in validate/stress grid (stress-only)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace diag level 1-4 dropdown with Validate/Stress radio buttons
- Validate: dcgmi L2, 60s CPU, 256MB/1p memtester, SMART short
- Stress: dcgmi L3 + targeted_stress in Run All, 30min CPU, 1GB/3p memtester, SMART long/NVMe extended
- Parallel GPU mode: spawn single task for all GPUs instead of splitting per model
- Benchmark table: per-GPU columns for sequential runs, server-wide column for parallel
- Benchmark report converted to Markdown with server model, GPU model, version in header; only steady-state charts
- Fix IPMI power parsing in benchmark (was looking for 'Current Power', correct field is 'Instantaneous power reading')
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add parallel GPU mode (checkbox, off by default): runs all selected GPUs
simultaneously via a single bee-gpu-burn invocation instead of sequentially;
per-GPU telemetry, throttle counters, TOPS, and scoring are preserved
- Make queryBenchmarkGPUInfo resilient: falls back to a base field set when
extended fields (attribute.multiprocessor_count, power.default_limit) cause
exit status 2, preventing lgc normalization from being silently skipped
- Log explicit "graphics clock lock skipped" note when inventory is unavailable
- Collect server model from DMI (/sys/class/dmi/id/product_name) and store in
result JSON; benchmark history columns now show "Server Model (N× GPU Model)"
grouped by server+GPU type rather than individual GPU index
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tasks are now started simultaneously when multiple are enqueued (e.g.
Run All). The worker drains all pending tasks at once and launches each
in its own goroutine, waiting via WaitGroup. kmsg watcher updated to
use a shared event window with a reference counter across concurrent tasks.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add platform/error_patterns.go: pluggable table of kernel log patterns
(NVIDIA/GPU, PCIe AER, storage I/O, MCE, EDAC) — extend by adding one struct
- Add app/component_status_db.go: persistent JSON store (component-status.json)
keyed by "pcie:BDF", "storage:dev", "cpu:all", "memory:all"; OK never
downgrades Warning or Critical
- Add webui/kmsg_watcher.go: goroutine reads /dev/kmsg during SAT tasks,
writes Warning to DB for matched hardware errors
- Fix task status: overall_status=FAILED in summary.txt now marks task failed
- Audit routine overlays component DB statuses into bee-audit.json on every read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- tasks: mark TaskRunning tasks as TaskFailed on bee-web restart instead of
re-queueing them — prevents duplicate gpu-burn-worker spawns when bee-web
crashes mid-test (each restart was launching a new set of 8 workers on top
of still-alive orphans from the previous crash)
- server: reduce metrics collector interval 1s→5s, grow ring buffer to 360
samples (30 min); cuts nvidia-smi/ipmitool/sensors subprocess rate by 5×
- platform: add KillTestWorkers() — scans /proc and SIGKILLs bee-gpu-burn,
stress-ng, stressapptest, memtester without relying on pkill/killall
- webui: add "Kill Workers" button next to Cancel All; calls
POST /api/tasks/kill-workers which cancels the task queue then kills
orphaned OS-level processes; shows toast with killed count
- metricsdb: sort GPU indices and fan/temp names after map iteration to fix
non-deterministic sample reconstruction order (flaky test)
- server: fix chartYAxisNumber to use one decimal place for 1000–9999
(e.g. "1,7к" instead of "2к") so Y-axis ticks are distinguishable
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Burn tab: replace 6 flat cards with 3 grouped cards (GPU Stress,
Compute Stress, Platform Thermal Cycling) + global Burn Profile
- Run All button at top enqueues all enabled tests across all cards
- GPU Stress: tool checkboxes enabled/disabled via new /api/gpu/tools
endpoint based on driver status (/dev/nvidia0, /dev/kfd)
- Compute Stress: checkboxes for cpu/memory-stress/stressapptest
- Platform Thermal Cycling: component checkboxes (cpu/nvidia/amd)
with platform_components param wired through to PlatformStressOptions
- bee-gpu-burn: default size-mb changed from 64 to 0 (auto); script
now queries nvidia-smi memory.total per GPU and uses 95% of it
- platform_stress: removed hardcoded --size-mb 64; respects Components
field to selectively run CPU and/or GPU load goroutines
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
