Each fan tile carries data-fan / data-ceil / data-measured and a small
script polls /api/metrics/latest every 5s — the metrics collector's own
sampling period, served from memory with no extra BMC call — updating
each tile's spin rate, duty fill and tooltip in place. Polling faster
would only re-read identical numbers; sampling the BMC faster would
choke it under load. FanReading gains json tags for the endpoint.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019VHG21rgTUiR1G3qFHTVmN
- GPU load switches from bee-gpu-burn (compute burn, ~88% TDP) to
dcgmproftester -t 1004 / targeted_power via
resolveBenchmarkPowerLoadCommand — the same engine Power/Thermal Fit
uses and the hottest sustained NVIDIA load we have, so fans are
actually pushed toward their ceiling.
- Sample loop is now IPMI-hang-proof: every ipmitool read is time-boxed
in an abandonable goroutine, and the poll interval backs off
geometrically (1s→30s) when reads are slow, tightening again on
recovery. A plateau is only trusted while telemetry is healthy;
degraded runs ride out to MaxLoadSec. Summary gains fan_samples /
telemetry_degraded. Drops the per-second nvidia-smi+power+cpu-temp
sampling from the hot loop.
- Dead code removed: FanStressRow, GPUStressMetric, sampleFanStressRow,
sampleGPUStressMetrics, WriteFanStressCSV/WriteFanSensorsCSV,
analyzeMaxTemp, sampleSystemPowerResolved.
Topology fan tiles:
- size encodes the fan's ceiling RPM (its class), not current speed;
coloured fill rising from the bottom encodes live duty cycle
(current / ceiling), shown only when the ceiling was measured.
- glyph spin rate now maps absolute RPM into a human-perceptible band
(fanSpinPeriodSec: 2.2s/turn at <=1000 RPM, 0.35s at >=13000).
- the "N fans · N OK · tile size ∝ …" caption line is gone.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019VHG21rgTUiR1G3qFHTVmN
Repurpose the previously-unwired RunFanStressTest into RunFanCheck, a
Load-tier SAT test that drives stressapptest (CPU+memory) and, when a GPU
is present, a GPU burn to 100% simultaneously, then watches every fan
until none has climbed for ~60s. The observed peak RPM per fan is the
"ceiling"; it is persisted through the existing fan-observation store.
MSI G4201 / AMI MegaRAC exposes no host-side fan force (every OEM IPMI
command returns 0xc1; Redfish Thermal is GET-only), so load-driven ramp
is the closest safe equivalent. See
bible-local/decisions/2026-09-04-fan-ceiling-check.md.
- platform.ResolveFanMaxRPM: per-fan max with fallback (persisted peak ->
peer peak -> current RPM), resolved in platform, not the view.
- platform.ErrTestNotApplicable: no load source or no fan sensors ->
task lands as cancelled ("not applicable"), never failed, so an
engineer never sees a false red. executeTaskWithOptions maps the
sentinel; finalizeTaskForResult honours a pre-set TaskCancelled.
- Verdict FAIL only for a fan at 0 RPM / IPMI cr-nr under load.
- /topo: one small spinning square per fan, sized by RPM / resolved max,
clickable through to a new "fan" component-detail type; per-fan status
recorded to the component-status DB from the fan SAT summary.
- Wiring: /api/sat/fan/run route, "fan" task target, Load-page card,
stress-mode Run All.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019VHG21rgTUiR1G3qFHTVmN
- nvidia.go: add Name field to nvidiaGPUInfo, include model name in
nvidia-smi query, set dev.Model in enrichPCIeWithNVIDIAData
- pages.go: fix duplicate GPU count in validate card summary (4 GPU: 4 x …
→ 4 x … GPU); fix PSU UNKNOWN fallback from hw.PowerSupplies; treat
activating/deactivating/reloading service states as OK in Runtime Health
- support_bundle.go: use "150405" time format (no colons) for exFAT compat
- sat.go / benchmark.go / platform_stress.go / sat_fan_stress.go: remove
.tar.gz archive creation from export dirs — export packs everything itself
- charts_svg.go: add min-max downsampling (1400 pt cap) for SVG chart perf
- benchmark_report.go / sat.go: normalize GPU fallback to "Unknown GPU"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-gpu-stress.c: remove per-wave cuCtxSynchronize barrier in both
cuBLASLt and PTX hot loops; sync at most once/sec so the GPU queue
stays continuously full — eliminates the CPU↔GPU ping-pong that
prevented reaching full TDP
- sat_fan_stress.go: default SizeMB 0 (auto = 95% VRAM) instead of
hardcoded 64 MB; tiny matrices caused <0.1 ms kernels where CPU
re-queue overhead dominated
- pages.go: move nvidia-targeted-power and nvidia-pulse from Burn →
Validate stress section alongside nvidia-targeted-stress; these are
DCGM pass/fail diagnostics, not sustained burn loads; remove the
Power Delivery / Power Budget card from Burn entirely
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Legend names were "GPU 0 %" — remove unit suffix since chart title already
conveys it. Fan parsing now handles the 5-field IPMI SDR format where the
value+unit ("4340 RPM") are combined in the last column rather than split
across separate fields.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two-phase GPU thermal cycling test with per-second telemetry:
- Phases: baseline → load1 → pause (no cooldown) → load2 → cooldown
- Monitors: fan RPM (ipmitool sdr), CPU/server temps (ipmitool/sensors),
system power (ipmitool dcmi), GPU temp/power/usage/clock/throttle (nvidia-smi)
- Detects throttling via clocks_throttle_reasons.active bitmask
- Measures fan response lag from load start (validates case-04 ~2s lag)
- Exports metrics.csv (wide format, one row/sec) and fan-sensors.csv (long format)
- TUI: adds [F] Fan Stress Test to Health Check screen with Quick/Standard/Express modes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mchus