ROCM_BANDWIDTH_TEST_VERSION, ROCM_VALIDATION_SUITE_VERSION, ROCBLAS,
ROCRAND, HIP_RUNTIME_AMD, HIPBLASLT, COMGR were defined in VERSIONS and
in bee.list.chroot but the sed substitution block only covered 3 of them.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add udev rule: /dev/ipmi0 readable by 'ipmi' group (no sudo needed)
- Add 'ipmi' group creation and bee user membership in chroot hook
- Remove legend from all charts (data shown in GPU table below)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without these modules /dev/ipmi0 doesn't exist and ipmitool can't
read fan RPM, PSU fans, or IPMI temperature sensors.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add rocm-validation-suite, rocblas, rocrand, hip-runtime-amd,
hipblaslt, comgr to ISO (~700MB, needed for HIP compute)
- RunAMDStressPack: run RVS GST (SGEMM ~31 TFLOPS/GPU) + bandwidth test
- Add rvs symlink in chroot setup hook
- Pin all new package versions in VERSIONS
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add rocm-bandwidth-test package to ISO
- Add bee user to 'render' group (/dev/kfd, /dev/dri/renderD* access)
- Add rocm-bandwidth-test symlink alongside rocm-smi
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bee-web.service: remove After=bee-audit so Go starts immediately
- Go serves loading page from / when audit JSON not yet present;
JS polls /api/ready (503 until file exists, 200 when ready)
then redirects to dashboard
- bee-openbox-session: wait for /healthz (Go binds fast <2s),
open http://localhost/ directly — no file:// cross-origin issues
- Remove loading.html static file
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace 15s blocking wait with instant Chromium launch showing a
dark loading page that polls /healthz every 500ms and auto-redirects
to the app when ready.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
memtest files live in chroot /boot (inside squashfs) but GRUB needs
them on the ISO filesystem. Binary hook copies them out at build time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Switch to performance governor when task queue starts processing,
back to powersave when queue drains. Removes bee-cpuperf.service.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move datacenter-gpu-manager and rocm-smi-lib from dynamic chroot hooks
into live-build's config/archives mechanism so lb caches the .deb files
in cache/packages.chroot/ between builds, eliminating repeated 900+ MB
downloads. Versions pinned via VERSIONS and substituted into package
lists at build time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--clean-build clears all caches (Go, NVIDIA, lb packages, work dir)
and rebuilds the Docker image, then proceeds with a full clean build.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Removes all cached build artifacts: Go cache, NVIDIA/NCCL/cuBLAS
downloads, lb package cache, and live-build work dir. Use before
a clean rebuild or when switching Debian/kernel versions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Switch squashfs compression from xz to zstd (3-5x faster compression,
~10-15% larger but decompresses faster at boot)
- Stop rm -rf BUILD_WORK_DIR on each build; rsync only config changes
so lb can reuse its chroot across builds (skips apt install step)
- Keep lb-packages cache in CACHE_ROOT as fallback if work dir is wiped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
apt-cacher-ng requires a separate container; lb's own package cache
persisted in --cache-dir is simpler and sufficient.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Saves cache/packages.chroot before wiping BUILD_WORK_DIR and
restores it after, so apt packages are not re-downloaded on every
build. Cache lives in --cache-dir (same place as Go/NVIDIA cache).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pass APT_PROXY=http://host:3142 to build-in-container.sh to route
all apt traffic through a local cache. Also supports --apt-proxy flag.
Mirrors in auto/config are set from BEE_APT_PROXY env when present.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
toram was incorrectly added to the default bootappend-live causing
every boot to copy the full ISO to RAM (slow on BMC virtual media).
Default boot reads squashfs from media; toram is available as a
separate menu entry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Removes ~100-300MB from the squashfs: man pages, non-en locales,
python cache, apt lists and package cache, temp files and logs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without this, git refuses to read the bind-mounted repo (UID mismatch)
and describe returns empty, causing the version to fall back to iso/v1.0.20.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without toram the squashfs is read from the physical medium at runtime.
Disconnecting the USB/CD after boot causes SQUASHFS I/O errors on any
uncached block, making all X11 apps crash with SIGBUS.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- All prompts accept 'a' = abort, 'b' = back to previous step
- Interface input: validate numeric range and name existence, re-prompt on bad input
- IP address: regex check x.x.x.x/prefix format
- Gateway: regex check x.x.x.x format
- Main loop: 'b' at mode selection goes back to interface list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On real server hardware (IPMI/BMC AST chip + nomodeset) the VESA
framebuffer is set by BIOS at whatever resolution it chooses (often
1024x768 or 1280x1024). The hardcoded 1920x1080 Modeline caused X to
fail → LightDM crash-loop → SOL console flooded with systemd messages.
- Remove Monitor section / Modeline from xorg.conf — fbdev now uses
whatever framebuffer resolution the kernel provides
- Add lightdm.service.d/bee-limits.conf: RestartSec=10,
max 3 restarts per 60s so headless hardware doesn't spam the console
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
User sees a numbered list but could only type the name.
Now numeric input is resolved to the interface name via awk NR==N.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Plain v2.x tags are now the active tagging scheme; iso/v1.0.x tags
are legacy. Swap priority in resolve_iso_version so the ISO is named
bee-debian12-v2.x-amd64.iso instead of v1.0.x-N-gHASH.
Also tighten the v* pattern to v[0-9]* to avoid accidentally matching
other prefixed tags in both resolve functions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
resolve_iso_version only matched iso/v* pattern; GUI release tags
(v2, v2.1 ... v2.6) were ignored, falling back to the old v1.0.20
annotated tag via resolve_audit_version.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add video=1920x1080 to kernel cmdline (sets fbdev to Full HD)
- Update GRUB gfxmode to 1920x1080 (fallback to 1280x1024,auto)
- Add Xorg Monitor section with 1920x1080 Modeline and preferred mode
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from user shell has /dev/fb0 permission issues and is fragile.
LightDM starts Xorg as root — standard LiveCD approach that works
on server hardware / IPMI KVM with nomodeset + fbdev/vesa.
- Add lightdm package, configure autologin as bee/openbox session
- Add /usr/share/xsessions/openbox.desktop
- Remove startx from .profile (LightDM manages X lifecycle)
- Remove Xwrapper.config needs_root_rights workaround (no longer needed)
- Enable lightdm.service in setup hook
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If X fails to start, the user gets a working shell prompt instead
of a dead session or autologin loop.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Interactive script: lists interfaces, DHCP or static IP config.
Shown as hint in tty1 welcome message.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Explicit xorg.conf.d config prevents Xorg from trying KMS/DRM
drivers that fail on server hardware with nomodeset.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startx from autologin shell targets VT1 directly — KVM sees the
graphical UI without VT switching. Remove bee-desktop.service
(systemd-launched X defaults to VT7, invisible on KVM).
Add xserver-xorg-video-fbdev for server AST/VGA framebuffer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
grub-pc and grub-efi-amd64 conflict with each other in Debian 12.
The -bin packages provide the same grub-install binaries without conflict.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
