A crash mid-command (e.g. the nvbandwidth reboot) previously lost that
job's entire output: streamExecOutput only buffered stdout/stderr in
memory and the job's log file was written once, after the process
exited. It now also streams each line straight to that file as it
arrives, so whatever printed before a crash survives.
Root filesystem here is a tmpfs overlay (toram boot), so the only real
persistence boundary is blackbox's mirror to removable media, not the
local write itself. platform.SetJobBoundaryHook lets app wire a touch
of a small kick-file after each job's output is written; blackboxWorker
now polls that file's mtime alongside its normal adaptive timer and
syncs immediately on a kick instead of waiting out the current flush
period (up to 30s).
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a GPU Settings card to /tools for the settings that actually
persist on NVIDIA data-center GPUs: ECC mode, MIG mode, and
Confidential Computing mode (all stored in the GPU's inforom/firmware,
take effect after a GPU reset or reboot) plus power limit (does not
persist — reapplied on demand). Includes a one-click "Reset All to
Defaults" that restores factory settings across every visible GPU,
touching only whatever has actually drifted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A (hardware-ingest-json v2.8-2.9): remove sensor location fields from schema
and collector; tag HardwareMemory.Location as json:"-"; add PlatformConfig to
HardwareSnapshot.
B (no-hardcoded-vendors): consolidate PCI vendor IDs into collector/pci_vendors.go;
replace all vendor-name string checks in isGPUDevice, isNVIDIADevice, isMellanoxDevice,
isAMDGPUDevice, matchesGPUVendor (sat_overlay), and validateIsVendorGPU (page_validate)
with numeric vendor_id comparisons.
C (module-structure): split app/app.go (1413 lines) into app.go + app_format.go,
app_network.go, app_services.go, app_packs.go, app_install.go — no logic changes.
D (go-code-style): wrap bare return err in interfaceAdminState and
interfaceIPv4Addrs (platform/network.go) with fmt.Errorf context including
the interface name.
E (go-project-bible): add bible-local/architecture/data-model.md and
bible-local/architecture/api-surface.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Runtime Health now shows only LiveCD system status (services, tools,
drivers, network, CUDA/ROCm) — hardware component rows removed
- Hardware Summary now shows server components with readable descriptions
(model, count×size) and component-status.json health badges
- Add Network Adapters row to Hardware Summary
- SFP module static info (vendor, PN, SN, connector, type, wavelength)
now collected via ethtool -m regardless of carrier state
- PSU statuses from IPMI audit written to component-status.json so PSU
badge shows actual status after first audit instead of UNKNOWN
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HPL 2.3 from netlib compiled against OpenBLAS with a minimal
single-process MPI stub — no MPI package required in the ISO.
Matrix size is auto-sized to 80% of total RAM at runtime.
Build:
- VERSIONS: HPL_VERSION=2.3, HPL_SHA256=32c5c17d…
- build-hpl.sh: downloads HPL + OpenBLAS from Debian 12 repo,
compiles xhpl with a self-contained mpi_stub.c
- build.sh: step 80-hpl, injects xhpl + libopenblas into overlay
Runtime:
- bee-hpl: generates HPL.dat (N auto from /proc/meminfo, NB=256,
P=1 Q=1), runs xhpl, prints standard WR... Gflops output
- platform/hpl.go: RunHPL(), parses WR line → GFlops + PASSED/FAILED
- tasks.go: target "hpl"
- pages.go: LINPACK (HPL) card in validate/stress grid (stress-only)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace diag level 1-4 dropdown with Validate/Stress radio buttons
- Validate: dcgmi L2, 60s CPU, 256MB/1p memtester, SMART short
- Stress: dcgmi L3 + targeted_stress in Run All, 30min CPU, 1GB/3p memtester, SMART long/NVMe extended
- Parallel GPU mode: spawn single task for all GPUs instead of splitting per model
- Benchmark table: per-GPU columns for sequential runs, server-wide column for parallel
- Benchmark report converted to Markdown with server model, GPU model, version in header; only steady-state charts
- Fix IPMI power parsing in benchmark (was looking for 'Current Power', correct field is 'Instantaneous power reading')
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add platform/error_patterns.go: pluggable table of kernel log patterns
(NVIDIA/GPU, PCIe AER, storage I/O, MCE, EDAC) — extend by adding one struct
- Add app/component_status_db.go: persistent JSON store (component-status.json)
keyed by "pcie:BDF", "storage:dev", "cpu:all", "memory:all"; OK never
downgrades Warning or Critical
- Add webui/kmsg_watcher.go: goroutine reads /dev/kmsg during SAT tasks,
writes Warning to DB for matched hardware errors
- Fix task status: overall_status=FAILED in summary.txt now marks task failed
- Audit routine overlays component DB statuses into bee-audit.json on every read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Runs CPU (stressapptest) + GPU stress simultaneously across multiple
load/idle cycles with varying idle durations (120s/60s/30s) to detect
cooling systems that fail to recover under repeated load.
Presets: smoke (~5 min), acceptance (~25 min), overnight (~100 min).
Outputs metrics.csv + summary.txt with per-cycle throttle and fan
spindown analysis, packed as tar.gz.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Task queue: all SAT/audit jobs enqueue and run one-at-a-time;
tasks persist past page navigation; new Tasks page with cancel/priority/log stream
- UI: consolidate nav (Validate, Burn, Tasks, Tools); Audit becomes modal;
Dashboard hardware summary badges + split metrics charts (load/temp/power);
Tools page consolidates network, services, install, support bundle
- AMD GPU: acceptance test and stress burn cards; GPU presence API greys
out irrelevant SAT cards automatically
- Burn tests: Memory Stress (stress-ng --vm), SAT Stress (stressapptest)
- Install to RAM: copies squashfs to /dev/shm, re-associates loop devices
via LOOP_CHANGE_FD ioctl so live media can be ejected
- Charts: relative time axis (0 = now, negative left)
- memtester: LimitMEMLOCK=infinity in bee-web.service; empty output → UNSUPPORTED
- SAT overlay applied dynamically on every /audit.json serve
- MIME panic guard for LiveCD ramdisk I/O errors
- ISO: add memtest86+, stressapptest packages; memtest86+ GRUB entry;
disable screensaver/DPMS in bee-openbox-session
- Unknown SAT status severity = 1 (does not override OK)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace raw systemctl output in table cell with:
- state badge (active/failed/inactive) — click to expand
- full systemctl status in collapsible pre block (max 200px scroll)
Fixes layout explosion from multi-line status text in table.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Copies the live system to a local disk via unsquashfs — no debootstrap,
no network required. Supports UEFI (GPT+EFI) and BIOS (MBR) layouts.
ISO:
- Add squashfs-tools, parted, grub-pc, grub-efi-amd64 to package list
- New overlay script bee-install: partitions, formats, unsquashfs,
writes fstab, runs grub-install+update-grub in chroot
Go TUI:
- Settings → Tools submenu (Install to disk, Check tools)
- Disk picker screen: lists non-USB, non-boot disks via lsblk
- Confirm screen warns about data loss
- Runs with live progress tail of /tmp/bee-install.log
- platform/install.go: ListInstallDisks, InstallToDisk, findLiveBootDevice
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two-phase GPU thermal cycling test with per-second telemetry:
- Phases: baseline → load1 → pause (no cooldown) → load2 → cooldown
- Monitors: fan RPM (ipmitool sdr), CPU/server temps (ipmitool/sensors),
system power (ipmitool dcmi), GPU temp/power/usage/clock/throttle (nvidia-smi)
- Detects throttling via clocks_throttle_reasons.active bitmask
- Measures fan response lag from load start (validates case-04 ~2s lag)
- Exports metrics.csv (wide format, one row/sec) and fan-sensors.csv (long format)
- TUI: adds [F] Fan Stress Test to Health Check screen with Quick/Standard/Express modes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New tui/sat_progress.go: polls {DefaultSATBaseDir}/{prefix}-*/verbose.log every 300ms and parses completed/in-progress steps
- Busy screen now shows each step as PASS lscpu (234ms) / FAIL stress-ng (60.0s) / ... sensors-after instead of just "Working..."
2. Test results shown on screen (instead of just "Archive written to /path")
- RunCPUAcceptancePackResult, RunMemoryAcceptancePackResult, RunStorageAcceptancePackResult, RunAMDAcceptancePackResult now read summary.txt from the run directory and return a formatted per-step result:
Run: 2025-03-25T10:00:00Z
PASS lscpu
PASS sensors-before
FAIL stress-ng
PASS sensors-after
Overall: FAILED (ok=3 failed=1)
3. AMD GPU SAT with auto-detection
- platform.System.DetectGPUVendor(): checks /dev/nvidia0 → "nvidia", /dev/kfd → "amd"
- platform.System.RunAMDAcceptancePack(): runs rocm-smi, rocm-smi --showallinfo, dmidecode
- GPU SAT (G key / GPU row enter) automatically routes to AMD or NVIDIA based on detected vendor
- "Run All" also auto-detects vendor
4. Panel detail view
- GPU detail now shows the most recent (NVIDIA or AMD) SAT result, whichever is newer
- All SAT detail views use the same human-readable formatSATDetail format
isGPUDevice matched all AMD vendor PCIe devices (SATA, crypto coprocessors,
PCIe dummies) because of a broad strings.Contains(vendor,"amd") check.
Remove it — AMD Instinct/Radeon GPUs are caught by ProcessingAccelerator /
DisplayController class. Also exclude ASPEED (BMC VGA adapter).
Add clear before bee-tui to avoid dirty terminal output.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BMC:
- collector/board.go: collectBMCFirmware() via ipmitool mc info, graceful skip if /dev/ipmi0 absent
- collector/collector.go: append BMC firmware record to snap.Firmware
- app/panel.go: show BMC version in TUI right-panel header alongside BIOS
CPU SAT:
- platform/sat.go: RunCPUAcceptancePack(baseDir, durationSec) — lscpu + sensors before/after + stress-ng
- app/app.go: RunCPUAcceptancePack + RunCPUAcceptancePackResult methods, satRunner interface updated
- app/panel.go: CPU row now reads real PASS/FAIL from cpu-*/summary.txt via satStatuses(); cpuDetailResult shows last SAT summary + audit data
- tui/types.go: actionRunCPUSAT, confirmBody for CPU test with mode label
- tui/screen_health_check.go: hcCPUDurations [60,300,900]s; hcRunSingle(CPU)→confirm screen; executeRunAll uses RunCPUAcceptancePackResult
- tui/forms.go: actionRunCPUSAT → RunCPUAcceptancePackResult with mode duration
- cmd/bee/main.go: bee sat cpu [--duration N] subcommand
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- TUI: duration presets (10m/1h/8h/24h), GPU multi-select checkboxes
- nvtop launched concurrently with SAT via tea.ExecProcess; can reopen or abort
- GPU metrics collected per-second during bee-gpu-stress (temp/usage/power/clock)
- Outputs: gpu-metrics.csv, gpu-metrics.html (offline SVG), gpu-metrics-term.txt
- Terminal chart: asciigraph-style line chart with box-drawing chars and ANSI colours
- AUDIT_VERSION bumped 0.1.1 → 1.0.0; nvtop added to ISO package list
- runtime-flows.md updated with full NVIDIA SAT TUI flow documentation
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Mikhail Chusavitin
mchusandClaude Sonnet 4.6