Investigating the CG480-S6053 reboot needed a way to run an ad-hoc load
(nvbandwidth across a specific GPU set) while sampling IPMI/nvidia-smi
telemetry in the background — without hardcoding a one-off test into the
SAT pack code for a single investigation.
- audit/internal/platform/scenario.go: ScenarioSpec/ScenarioJob (JSON,
no new dependency) + System.RunScenario. "command" jobs run sequential
or parallel (per-job "parallel" flag); "sampler" jobs run concurrently
in the background on their own interval until every command job
finishes or the scenario's timeout elapses. "{{gpus}}" in a command's
cmd is substituted from that job's gpu_indices. Command jobs are wired
through the same satJobBoundaryHook/satSyncBracketHook seams the SAT
job runner uses, so a scenario run gets the same durability treatment
(evidence that a risky command started/finished reaches blackbox before
a possible crash, not just whatever streamed to the RAM-backed export
dir).
- export.go: ReadScenarioFromRemovableMedia mounts each removable target
looking for scenarios/<name>.json — an air-gapped engineer can author a
scenario elsewhere, drop it under scenarios/ on the same USB stick
already plugged in for blackbox, and run it with no network path onto
the host.
- cmd/bee: new `bee run <file.json|name>` (bare name = looked up on
removable media); `bee scenario run <arg>` kept as a longer alias.
- scenarios/nvbandwidth-all-gpu-power-watch.json: the scenario that
reproduced the actual reboot (full nvbandwidth across all GPUs, which
crashed, vs. clean per-socket passes), with IPMI sensor + GPU power/temp
sampling for a power-delivery correlation check.
Also: webui/page_topo.go — the /topo page's component-status-detail modal
(GET /api/component-detail/{type}) showed "No status data recorded yet"
for any component type ComponentStatusDB has no history for yet (e.g. GPU
before a SAT run this boot), even though the topology card for the same
component already showed "N OK" from the audit inventory snapshot.
inventoryFallbackRecords now synthesizes records from that same inventory
snapshot when StatusDB is empty, using the same device classifiers
(isGPUDeviceClass etc.) and severity mapping (classifyTopoSeverity) the
topology card itself uses, so the two views never disagree.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces the flat export/ + techdump/ + system/ + systemd/ layout (two
same-named-but-different techdump/ dirs, disk reports duplicated between a
SAT run dir and techdump/) with one shared categorizeExportTree used by both
BuildSupportBundle and the blackbox USB mirror:
- export/{cpu,memory,storage,gpu,network,platform}/ — raw vendor-tool
output grouped by device type, plus export/reanimator.json ready to POST
to Reanimator's /ingest/hardware endpoint.
- status/ — computed diagnosis (component-status.json, runtime-health.*,
and metrics.db, previously missing from every bundle entirely).
- tasks/ — bee's own task-run bookkeeping (bee-sat/, bee-bench/, task
reports, service logs) where duplication with export/ is expected.
- livecd/{gui,host}/ — live-boot/kiosk-session-only diagnostics, kept out
of the hardware-facing tree.
Drops the redundant disk-report mirror write in RunStorageAcceptancePack
and the now-dead syncDirectoryTree/removeMissingPaths; adds a size+mtime
skip in copyPath so the blackbox mirror doesn't rewrite unchanged files
every cycle. README.md rewritten to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- gpuBandwidthSocketGroups: a single GPU whose NUMA node fails to resolve
no longer collapses the whole per-socket nvbandwidth split into one
fallback pass — it now folds into the last resolved group instead,
preserving isolation for the sockets that did resolve.
- blackbox discoverMarkedTargets: skip mounting/unmounting devices that
already have a running worker on every 2s discovery tick. This was
observed hammering the same USB target continuously (mount+unmount
every ~2s for the whole session) and contending with the worker's own
sync cycle, plausibly explaining multi-minute sync cycles seen on a
real crash bundle.
- syncFilesystem now calls syscall.Sync() directly instead of spawning
/bin/sync per copied file; blackbox mounts removable targets with
-o sync so writes are durable without relying on the app-level sync as
the primary mechanism.
- New platform.SetSyncBracketHook / satJob.syncBracket: blocks (with a
bounded timeout) on blackbox actually reaching removable media right
before and right after a diagnostic's real load step (nvbandwidth,
memtester, stress-ng, dcgmi diag, nccl, smartctl/nvme self-test...),
instead of only firing a fire-and-forget kick after the job's own log
file is written. A crash mid-load now has durable evidence the load
started, not just whatever streamed to the RAM-backed export dir before
blackbox's next scheduled cycle.
Found investigating a real support bundle where blackbox's last
successful sync (19:55:25) predated both the previous job finishing and
the crashing nvbandwidth job starting (19:56:57) — none of the crash
window ever reached durable media.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A crash mid-command (e.g. the nvbandwidth reboot) previously lost that
job's entire output: streamExecOutput only buffered stdout/stderr in
memory and the job's log file was written once, after the process
exited. It now also streams each line straight to that file as it
arrives, so whatever printed before a crash survives.
Root filesystem here is a tmpfs overlay (toram boot), so the only real
persistence boundary is blackbox's mirror to removable media, not the
local write itself. platform.SetJobBoundaryHook lets app wire a touch
of a small kick-file after each job's output is written; blackboxWorker
now polls that file's mtime alongside its normal adaptive timer and
syncs immediately on a kick instead of waiting out the current flush
period (up to 30s).
On multi-socket systems, run the NVIDIA bandwidth diagnostic once per
CPU socket before the all-GPU pass, so a crash confined to the all-GPU
run (with clean per-socket passes preceding it) isolates a cross-socket
peer-to-peer fault instead of leaving it conflated with a general
GPU/PCIe issue. Single-socket systems keep the original one-pass shape.
Also expand the support-bundle README with reference notes distilled
from a real analysis pass (BMC clock drift, "0/empty" tool output
meaning absent hardware rather than a fault, timestamp-matching before
assigning causality, and a normal-power-cycle SEL signature), plus a
step-by-step recipe for diagnosing an unexpected reboot/crash during a
specific test.
Storage acceptance runs already write disk-<prefix>-report.txt (per-drive
health + pseudographic resource bars) into the timestamped bee-sat run dir.
Also mirror it into techdump, a sibling of baseDir under the same export
dir, so a support bundle surfaces these reports alongside the rest of the
diagnostics without anyone having to dig into a specific bee-sat run dir.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Every place that surfaced a FAILED SAT result — task error messages,
component-status.json detail, and the hardware snapshot's ErrorDescription/
StatusHistory — used to say only "SAT overall_status=FAILED (see
summary.txt)" or "<label> failed", forcing an engineer to go dig through the
run directory to find out what actually broke.
nvidia-config's summary.txt now carries a "warnings" field with the specific
GPU/NVLink finding. A new SATFailureDetail/satFailureDetailFromKV in
component_status_db.go reads that field, or falls back to naming whichever
generic SAT sub-job(s) reported non-OK/UNSUPPORTED status along with their
exit code. This feeds both the task-runner error message and the component
status DB. sat_overlay.go's satKeyStatus (which drives ErrorDescription on
the exported hardware snapshot) now does the same, with storage kept
per-device so one drive's rc doesn't get attributed to another's card.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The standalone "confidential-computing" SAT target only ever checked CC
readiness, which most fleets never opt into (a NOT_READY verdict there
isn't a fault). Meanwhile DCGM diag never asserts GPU config compliance
(ECC/MIG/power-limit vs factory default) or NVLink topology (per NVIDIA's
own DGX BasePOD deployment guide, this needs a separate validation step)
— gaps confirmed against public DCGM docs and a real NV17-vs-expected-NV18
bonded pair found on a live bundle.
Repurposes the routine into "nvidia-config": reuses the existing
ListNvidiaGPUSettings() (already backing the GPU-settings page) to flag
ECC disabled, a MIG mode change stuck pending a reset/reboot, and a power
limit capped >5% below default; parses "nvidia-smi topo -m" bonded pairs
against "nvlink -s/-e" to flag any inactive lane or nonzero replay/
recovery/CRC counter on an otherwise-active bond. CC readiness is folded
in as one informational field (does not gate overall_status) rather than
a dedicated test. Reports under the same pcie:gpu:nvidia severity key as
every other nvidia-* SAT target instead of an isolated key, so a
config/NVLink FAILED result isn't invisible next to stress-test results.
Also fixes ApplySATResultToDB silently dropping any target with no
matching switch case (exactly what the old confidential-computing target
did) with a new coverage test enumerating every real SAT target.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
/topo blocked the HTTP request on live nvidia-smi calls with no timeout
(topo -m, nvlink -s/-e run on every page load), so a wedged driver hung
the page indefinitely. CaptureTechnicalDump now persists these dumps
once per audit cycle; the page reads them from techdump/ instead.
buildSocketIndex mapped NUMA node number to CPU by treating dmidecode's
Socket Designation (often 1-indexed, "CPU1"/"CPU2") as equal to the
NUMA node number (always 0-indexed) — GPUs/NICs on NUMA node 0 fell
into the "unknown" column, others attached to the wrong CPU box. Now
ranks CPUs by Socket value instead of assuming a shared numbering base.
Fixed a bug in ComponentStatusDB/applyComponentStatusDB where GPU SAT
results were keyed per-target ("pcie:gpu:nvidia-stress") instead of
per-vendor, which both broke cross-tier severity tracking (a later
clean "2. Check" run and an earlier failing "3. Load" run never
compared severities) and silently failed to match any real BDF, so the
DB overlay never reached the topology graph at all. GPU keys are now
normalized to vendor ("pcie:gpu:nvidia"/"pcie:gpu:amd"). Also skip
writing to the DB when a SAT task was aborted by the user (ctx
canceled), so a partial run can't stomp a previously recorded status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Covers the sat.go fix from 2599d9c: a failing "dcgmi discovery -l"
preflight job must not flip the pack's overall status, and jobs marked
with retries should recover from a transient first-attempt failure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a GPU Settings card to /tools for the settings that actually
persist on NVIDIA data-center GPUs: ECC mode, MIG mode, and
Confidential Computing mode (all stored in the GPU's inforom/firmware,
take effect after a GPU reset or reboot) plus power limit (does not
persist — reapplied on demand). Includes a one-click "Reset All to
Defaults" that restores factory settings across every visible GPU,
touching only whatever has actually drifted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
dcgmi discovery -l is a preflight/metadata step ahead of the real DCGM
diag jobs; a transient failure racing nv-hostengine startup shouldn't
flip the whole pack's status, so it's now marked informational with a
couple of retries. Separately, bound the fabricmanager/nvidia-dcgm
systemctl restart/start calls in bee-nvidia-load with a timeout so a
wedged unit (e.g. fabric training stuck on a bad NVSwitch fabric)
can't hang bee-nvidia.service forever and block dcgm from ever
starting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
storcli64 enumerates these controllers but reports zero drives; storcli2
is the tool Broadcom ships for Tri-Mode/MegaRAID8 hardware and uses a
compatible JSON schema for drive listing. Wires storcli2 into both the
collector (structured drive data) and the webui RAID Management page
(dedup so a controller isn't double-listed if storcli64 already sees it
with zero drives), plus techdump raw collection and the ISO vendor-tool
build step.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only visualization page: CPU sockets as anchor nodes, PCIe
devices (GPU/NIC/RAID) linked to their NUMA-affine socket with edge
color derived strictly from link_speed vs max_link_speed (not from the
device's own Status, which can also be overwritten by SAT-test results
on the same field), PSU/BMC as standalone boxes with no connecting
line, and a separate NVLink Topology card (live nvidia-smi topo -m /
nvlink -s/-e queries, not persisted to any contract).
GPU-GPU edges are drawn strictly from the actual bonded-pair list
parsed out of "nvidia-smi topo -m" (parseGPUPairAdjacency), not from
adjacent box position in the layout — an earlier ASCII mockup drew a
"chain" through unrelated GPUs, which a dedicated regression test now
guards against. A bonded pair spanning two different NUMA nodes is
flagged Warning on the edge and on both GPU boxes, per project
decision that this is an anomaly worth surfacing, not a neutral fact.
Zero changes to the ingest contract: this reverts the HardwareNVLinkPort/
HardwarePCIeDevice.NVLinks field shipped in v11.55 (33d6eee) along with
its collector/nvidia.go enrichment — that field risked a 400 from
Reanimator Core's strict decoder without an RFC, and isn't needed since
the topo page queries nvidia-smi directly instead of reading it from
audit.json. The v11.55 systemd fix (bee-nvidia.service ordering,
nv-hostengine restart) and the nvlink-status/-errors/dcgmi dumps in the
support bundle are untouched.
Also reorganizes support bundle collection per project convention:
system/ is now LiveCD-operational logs only (Xorg, services, console,
network/FS of the host itself); all server-hardware dumps (lspci,
NVIDIA/NVLink/DCGM, fabric manager, PCIe AER, ethtool, mstflint) move
to techdump/, deduplicating two entries already produced by
platform/techdump.go. Adds nvidia-bug-report.sh (previously only
collected inside the NVIDIA SAT pack) and lscpu to the always-on dump.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
dcgmi diag's failures only surface a terse wrapper message ("Detected
driver major version 0 is not between the required versions 346 and
2000"), which doesn't say why. Reading DCGM's own nvvs source
(NvidiaValidationSuite.cpp::CheckDriverVersion) shows this fires when
dcgmSystem.GetDeviceAttributes(0, ...) comes back empty — the version
string is never actually malformed. Diagnosing further requires info
bee never collected: whether dcgmi discovery even sees GPU 0/1
correctly, and nvvs's own internal debug log (normally
/var/log/nvidia-dcgm/nvvs.log, which bee never captured).
Add a "dcgmi discovery -l" job before every DCGM diag invocation
(check-gpu-dcgm-l2, nvbandwidth, targeted_power, pulse_test,
targeted_stress), and route dcgmi diag through
"-v -d DEBUG --debugLogFile {{run_dir}}/..." so the full nvvs debug
log lands in the SAT run dir and gets picked up by the support bundle
automatically, instead of needing a live SSH session on hardware we
usually can't get a second look at.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New read-only "Check" step reports whether this server can run NVIDIA
Confidential Computing: CPU TEE support (Intel TDX / AMD SEV-SNP, via
dmesg and kvm_amd sysfs params) and GPU firmware CC capability (via
`nvidia-smi conf-compute -q`). Also collect that command's output into
the techdump export bundle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Disk report now ends with a Conclusion section judging a drive NEW/USED
against loose thresholds (<110% capacity written, <210% read, <7d
uptime, <30 power cycles), listing which ones tripped. Data
Written/Read in the Usage section now scale to TB/PB via
formatBytesHuman instead of always printing raw GB. storageSATCommands
now runs smartctl with -i so SATA/SAS reports get Model/Serial/
Firmware/Capacity, which the Conclusion needs to evaluate the
write/read criteria (previously only -H -A was collected).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
nvme-cli emits large 64-bit counters as JSON-quoted strings on some
versions; the disk-report text generator only handled bare numbers and
{lo,hi} objects, so power_on_hours/data_units_read/data_units_written
etc. silently parsed as 0 while the structured collector path already
handled this correctly. Unify both paths on a single exported
JSONInt64/NVMeSmartLog/NVMeIDCtrl type in collector/storage.go instead
of keeping two independent nvme-cli JSON parsers in sync.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ramp Sequence table's Run 1 row showed "—" for GPU power because the
step-1 fast path (reusing single-card calibration) never populated
PerGPUTelemetry like steps 2+ do. Also add GPU total W / Server itself W
columns and an idle baseline row so server-vs-GPU consumption is visible
per ramp step.
smartctl -t short only launches the self-test and returns immediately
("Testing has begun"); unlike nvme device-self-test --wait, it has no
blocking mode. Validate/Load runs closed the task and produced reports
before the drive actually finished the test. Now poll smartctl -a until
the test completes (or times out) and report the real result.
Also add a per-disk "Resource" section with pseudographic progress bars
for uptime (vs 5y design life), bytes written (vs 1 DWPD x 5y budget),
and bytes read (percent from SMART attribute 242), all rendered in
human-scaled units (days/years, TB/PB) instead of raw hour/byte counts.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Check mode: read-only SMART/NVMe data collection, no self-test.
Load mode: same collection + short self-test (nvme device-self-test -s 1,
smartctl -t short). Card descriptions updated accordingly.
After each storage SAT run, a disk-N-devname-report.txt is written
per device into the runDir (auto-included in support bundles).
Web UI task page renders one card per disk directly below Task Report.
Also fixes pre-existing TestDashboardRendersRuntimeHealthTable failure:
test fixture used "inactive" status but code now treats inactive as OK
for completed oneshot services; updated to "failed" to match intent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- sat.go: DetectGPUVendor lspci fallback now checks GPU device classes
([0300]/[0302]/[0380]) per line instead of scanning the whole output for
vendor name; AMD EPYC servers have dozens of AMD-branded PCIe entries
(Root Complex, IOMMU, Host Bridge) that were triggering the old check
- blackbox.go: fix deadlock in finishCycle — it held w.mu while calling
persistState(), which acquires rt.mu then re-acquires w.mu inside
persistStateLocked(); now w.mu is released before persistState()
- build.sh: remove NVIDIA-specific overlay files (bee-gpu-burn,
bee-john-gpu-stress, bee-nccl-gpu-stress, bee-nvidia-recover,
bee-dcgmproftester-staggered, bee-check-nvswitch,
nvidia-fabricmanager.service.d/) for non-nvidia build variants
- bee-selfheal: gate NVIDIA recovery on BEE_GPU_VENDOR=nvidia so the
script does not attempt to restart bee-nvidia.service on NOGPU builds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- audit JSON: IPMI sensor readings (ipmitool sensor) merged into hardware.sensors alongside lm-sensors data
- audit JSON: IPMI SEL entries (ipmitool sel list) in hardware.event_logs with source "ipmi-sel"
- audit JSON: dmesg error/warning lines in hardware.event_logs with source "dmesg" (filtered by error/warn/AER/Xid/NVRM/ECC/panic patterns)
- support bundle: added ipmitool-sensor.txt, ipmitool-sel.txt, ipmitool-sel-time.txt to techdump
- saa_dmi.go: fix dmiItemRE to accept SHN with parentheses (e.g. PS(4)LC for PSU fields)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
A (hardware-ingest-json v2.8-2.9): remove sensor location fields from schema
and collector; tag HardwareMemory.Location as json:"-"; add PlatformConfig to
HardwareSnapshot.
B (no-hardcoded-vendors): consolidate PCI vendor IDs into collector/pci_vendors.go;
replace all vendor-name string checks in isGPUDevice, isNVIDIADevice, isMellanoxDevice,
isAMDGPUDevice, matchesGPUVendor (sat_overlay), and validateIsVendorGPU (page_validate)
with numeric vendor_id comparisons.
C (module-structure): split app/app.go (1413 lines) into app.go + app_format.go,
app_network.go, app_services.go, app_packs.go, app_install.go — no logic changes.
D (go-code-style): wrap bare return err in interfaceAdminState and
interfaceIPv4Addrs (platform/network.go) with fmt.Errorf context including
the interface name.
E (go-project-bible): add bible-local/architecture/data-model.md and
bible-local/architecture/api-surface.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Network: green if at least one interface has IPv4 (drop PARTIAL state).
Bee Services: treat inactive as OK — oneshot services (bee-sshsetup,
bee-preflight, bee-network, bee-audit, etc.) complete successfully and
exit to inactive; only failed is a real problem.
nvidia-fabricmanager: add ExecCondition=bee-check-nvswitch drop-in so
the service is silently skipped (inactive, not failed) on systems
without NVSwitch hardware (e.g. H200 NVL with direct NVLink, no
NVSwitch chips). bee-check-nvswitch detects NVSwitch via lspci
(vendor 10de, class 0680).
bee-nvidia.service: add ConditionPathExists=/usr/local/bin/bee-nvidia-load
so the unit is a no-op if somehow present in a non-nvidia build.
bee-boot-status: read /etc/bee-gpu-vendor and exclude bee-nvidia from
CRITICAL/ALL on non-nvidia builds, preventing boot hang if the unit
is unexpectedly present.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add nvidia-aer-correctable and pcie-aer-correctable patterns to catch
"bus correctable error" events seen in SEL (Critical Interrupt / offset 7).
Both patterns carry severity "warning" — correctable errors are
hardware-recovered and should not flag a card as failed.
Fix kmsg_watcher routing: GPU-category events were keyed as pcie:<BDF>
but the UI queries for pcie:gpu: prefix. Split the switch so "gpu" →
pcie:gpu:<BDF> and "pcie" → pcie:<BDF>. This applies to both
flushWindow (SAT-window path) and flushImmediate (always-on path).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
targeted_stress, targeted_power, and the Level 2/3 diag were dispatched
one GPU at a time from the UI, turning a single dcgmi command into 8
sequential ~350–450 s runs. DCGM supports -i with a comma-separated list
of GPU indices and runs the diagnostic on all of them in parallel.
Move nvidia, nvidia-targeted-stress, nvidia-targeted-power into
nvidiaAllGPUTargets so expandSATTarget passes all selected indices in one
API call. Simplify runNvidiaValidateSet to match runNvidiaFabricValidate.
Update sat.go constants and page_validate.go estimates to reflect all-GPU
simultaneous execution (remove n× multiplier from total time estimates).
Stress test on 8-GPU system: ~5.3 h → ~2.5 h.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- benchmark.go: retain sdrLastStep from final ramp step instead of
re-sampling after test when GPUs are already idle
- scripts/deploy.sh: build+deploy bee binary to remote host over SSH
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
DCMI reports only the managed power domain (~CPU+MB), missing GPU draw.
PSU AC input sensors cover full wall power. When samplePSUPower returns
data, sum the slots for PowerW; fall back to DCMI otherwise.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Same fix as ramp steps: take sdrSingle snapshot after calibration
and prefer PSUInW over DCMI for singleIPMILoadedW. DCMI kept as
fallback. Log message indicates source.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When sdrStep.PSUInW is available, prefer it over DCMI for
ramp.ServerLoadedW and ServerDeltaW. DCMI on this platform (MSI 4-PSU)
reports ~half actual draw; SDR sums all PSU_POWER_IN sensors correctly.
Delta is now SDR-to-SDR (sdrStep.PSUInW - sdrIdle.PSUInW) for
consistency. DCMI path kept as fallback when SDR has no PSU data.
Log message now indicates the source (SDR PSU AC input vs DCMI).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MSI servers place PSU_POWER_IN/OUT sensors on entity 3.0, not 10.N
(the IPMI "Power Supply" entity). The old parser filtered by entity ID
and found nothing, so the dashboard fell back to DCMI which reports
roughly half the actual draw.
Now delegates to collector.PSUSlotsFromSDR — the same name-based
matching already used in the Power Fit benchmark.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
A single dcgmproftester process without -i only loads GPU 0 regardless of
CUDA_VISIBLE_DEVICES. Now always routes multi-GPU runs through
bee-dcgmproftester-staggered (--stagger-seconds 0 for parallel mode),
which spawns one process per GPU so all GPUs are loaded simultaneously.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Increase stability profile duration from 33 min to 90 min by wiring
powerBenchDurationSec() into runBenchmarkPowerCalibration (was discarded)
- Collect per-step PSU slot readings, fan RPM/duty, and per-GPU telemetry
in ramp loop; add matching fields to NvidiaPowerBenchStep/NvidiaPowerBenchGPU
- Rewrite renderPowerBenchReport: replace Per-Slot Results with Single GPU
section, rework Ramp Sequence rows=runs/cols=GPUs, add PSU Performance
section (conditional on IPMI data), add transposed Single vs All-GPU
comparison table in per-GPU sections
- Add fmtMDTable helper (benchmark_table.go) and apply to all tables in
both power and performance reports so columns align in plain-text view
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stability hardening (webui/app):
- readFileLimited(): защита от OOM при чтении audit JSON (100 MB),
component-status DB (10 MB) и лога задачи (50 MB)
- jobs.go: буферизованный лог задачи — один открытый fd на задачу
вместо open/write/close на каждую строку (устраняет тысячи syscall/сек
при GPU стресс-тестах)
- stability.go: экспоненциальный backoff в goRecoverLoop (2s→4s→…→60s),
сброс при успешном прогоне >30s, счётчик перезапусков в slog
- kill_workers.go: таймаут 5s на скан /proc, warn при срабатывании
- bee-web.service: MemoryMax=3G — OOM killer защищён
Build script:
- build.sh: удалён блок генерации grub-pc/grub.cfg + live.cfg.in —
мёртвый код с v8.25; grub-pc игнорируется live-build, а генерируемый
live.cfg.in перезаписывал правильный статический файл устаревшей
версией без tuning-параметров ядра и пунктов gsp-off/kms+gsp-off
- build.sh: dump_memtest_debug теперь логирует grub-efi/grub.cfg
вместо grub-pc/grub.cfg (было всегда "missing")
GRUB:
- live-theme/bee-logo.png: логотип пчелы 400×400px на чёрном фоне
- live-theme/theme.txt: + image компонент по центру в верхней трети
экрана; меню сдвинуто с 62% до 65%
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
