Remove HPL from build and audit flows

iso/overlay/usr/local/bin/bee-hpl

@@ -1,97 +0,0 @@
-#!/bin/sh
-# bee-hpl — run HPL (High Performance LINPACK) with auto-sized problem.
-#
-# Generates HPL.dat based on available RAM, runs xhpl, and prints standard
-# HPL output. The WR... line with Gflops is parsed by the bee audit tool.
-#
-# Usage: bee-hpl [--mem-fraction 0.80] [--nb 256] [--seconds N]
-#
-# --mem-fraction   fraction of total RAM to use for the matrix (default 0.80)
-# --nb             block size; 256 is good for modern CPUs (default 256)
-# --seconds        ignored — HPL runtime is determined by problem size; kept
-#                  for interface compatibility with other bee stress tools
-
-set -eu
-
-XHPL="/usr/local/lib/bee/xhpl"
-MEM_FRACTION="0.80"
-NB=256
-
-usage() {
-    echo "usage: $0 [--mem-fraction 0.80] [--nb 256] [--seconds N]" >&2
-    exit 2
-}
-
-while [ "$#" -gt 0 ]; do
-    case "$1" in
-        --mem-fraction) [ "$#" -ge 2 ] || usage; MEM_FRACTION="$2"; shift 2 ;;
-        --nb)           [ "$#" -ge 2 ] || usage; NB="$2"; shift 2 ;;
-        --seconds)      [ "$#" -ge 2 ] || usage; shift 2 ;;  # accepted, ignored
-        *) usage ;;
-    esac
-done
-
-[ -x "${XHPL}" ] || { echo "ERROR: xhpl not found at ${XHPL}" >&2; exit 1; }
-
-# Detect total RAM in bytes
-TOTAL_KB=$(grep MemTotal /proc/meminfo | awk '{print $2}')
-[ -n "${TOTAL_KB}" ] || { echo "ERROR: cannot read MemTotal from /proc/meminfo" >&2; exit 1; }
-TOTAL_BYTES=$(( TOTAL_KB * 1024 ))
-
-# N = floor(sqrt(fraction * total_bytes / 8)) rounded down to multiple of NB
-# Use awk for floating-point sqrt
-N=$(awk -v total="${TOTAL_BYTES}" -v frac="${MEM_FRACTION}" -v nb="${NB}" '
-BEGIN {
-    raw = int(sqrt(total * frac / 8.0))
-    n   = int(raw / nb) * nb
-    if (n < nb) n = nb
-    print n
-}')
-
-echo "loader=bee-hpl"
-echo "total_ram_mb=$(( TOTAL_KB / 1024 ))"
-echo "matrix_n=${N}"
-echo "block_nb=${NB}"
-echo "mem_fraction=${MEM_FRACTION}"
-
-# Generate HPL.dat in a temp directory and run from there
-RUNDIR=$(mktemp -d)
-trap 'rm -rf "${RUNDIR}"' EXIT INT TERM
-
-cat > "${RUNDIR}/HPL.dat" <<DAT
-HPLinpack benchmark input file
-Innovative Computing Laboratory, University of Tennessee
-HPL.out        output file name (if any)
-6              device out (6=stdout, 7=stderr, file)
-1              # of problems sizes (N)
-${N}           Ns
-1              # of NBs
-${NB}          NBs
-0              PMAP process mapping (0=Row-,1=Column-major)
-1              # of process grids (P x Q)
-1              Ps
-1              Qs
-16.0           threshold
-1              # of panel fact
-2              PFACTs (0=left, 1=Crout, 2=Right)
-1              # of recursive stopping criterium
-4              NBMINs (>= 1)
-1              # of panels in recursion
-2              NDIVs
-1              # of recursive panel fact.
-1              RFACTs (0=left, 1=Crout, 2=Right)
-1              # of broadcast
-1              BCASTs (0=1rg,1=1rM,2=2rg,3=2rM,4=Lng,5=LnM)
-1              # of lookahead depth
-1              DEPTHs (>=0)
-2              SWAP (0=bin-exch,1=long,2=mix)
-64             swapping threshold
-0              L1 in (0=transposed,1=no-transposed) form
-0              U  in (0=transposed,1=no-transposed) form
-1              Equilibration (0=no,1=yes)
-8              memory alignment in double (> 0)
-DAT
-
-cd "${RUNDIR}"
-echo "---"
-"${XHPL}"