Add PCI Vendor ID / Device ID to hardware.storage[] per the updated Reanimator
ingest contract, mirroring the existing pcie_devices[] fields. Populated for
Redfish-collected NVMe drives (live + TSR replay, via linked PCIeFunctions)
and for Inspur (from asset.json's own PcieInfo[], joined by PcieSlot). Also
fixes canonicalDevicesForExport dropping the fields when converting Storage
into the canonical HardwareDevice list used by the actual export path.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Inspur/Kaytus onekeylog dumps only exposed the mechanical carrier FRU serial
(component/fru.txt Board Product) as board identity. That serial doesn't
change when the actual NVIDIA HGX baseboard (SXM+NVSwitch "delta board") is
swapped, causing false "board unchanged" conclusions. Parse the real HGX
tray/baseboard Model/PartNumber/SerialNumber triples from
HGX_HWInfo_FWVersion.log into a new HardwareConfig.HGX field, and normalize
Redfish's NA/N-A placeholders to empty across HGX identity parsing.
Closes#21
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Fixes#20. This onekeylog variant has no devicefrusdr.log at all: FRU/sensors
come from raw ipmitool text output, PCIe/GPU presence has a dedicated
structural snapshot, SEL lives at a different path, and BMC component
failures are logged separately from SEL/IDL.
- Fall back to component/fru.txt (same FRU block format as devicefrusdr.log)
and component/sensor.txt / sdr.txt (ipmitool sensor list / sdr elist)
when devicefrusdr.log is absent.
- Parse log/bmc/diagnose/OtrdDiagnoseComponent.json's PCIe Device Info array
for GPU/PCIe presence and link state, independent of SEL/IDL alarm
history; flag devices running below their negotiated max link
speed/width as degraded with a Warning event.
- Fall back to log/sel.csv (same format as selelist.csv) when selelist.csv
is absent.
- Parse log/bmc/commer-comp/{commerslot,commerhmc,commerswvr,commerswcpld}
logs (including rotated *.tar.gz.N parts) into failure events, filtering
known-noisy lines.
- Collapse SEL events duplicated across sources by
(timestamp, event_type, description).
- Surface a CollectionError when FRU/sensors are still empty after all
fallbacks, instead of silently returning an empty inventory.
- Fix ParseFRU: a later placeholder "Product Serial : 0" / "Product Part
Number : NULL" line in the same FRU block (e.g. SCM_FRU) was overwriting
an already-parsed real Board Serial/Part Number.
Verified against dump_23DB01633_20260727-1359.tar.gz (HGX B200, KR9288-X3):
fru 0→21, sensors 0→303, 8 GPUs present at Gen5 x16 in slots 100-107.
Deferred (not covered by this change): BIOS-change-settings context and
BIOS POST codes from the same layout — see bible-local/10-decisions.md
ADL-048.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ParseIDLLog deduped by eventID|eventType|description, which is identical
across every occurrence of a recurring alarm (e.g. the flapping PCIe
presence check on Inspur HGX boards). That collapsed every later
occurrence into the first one, so applyGPUStatusFromEvents computed GPU
health from a stale, truncated event list and marked failed GPUs as OK.
Some onekeylog BMC firmware variants split the combined component.log
into per-file D-Bus GetAll transcripts under component/ (e.g.
PowerSupplyInfo.txt, FanInfo.txt), which the inspur parser did not
read, leaving PSU and fan data empty. Add a GETALL block parser and
wire it as a fallback for PSU and fan telemetry when component.log is
absent; document the layout and known gaps in bible-local.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
When the BMC HDD API returns an empty array (RAID controller attached via
PCIe, e.g. PM8204-2GB), disk serial numbers are now recovered from smartd
startup messages in SOLHostCapture.log.
Enrichment runs in three passes: model-match on existing slots, positional
fill of empty backplane placeholders, then new entries for any remainder.
Both log/ and runningdata/var/ copies are merged with serial deduplication.
Parser version bumped to 2.1.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three related fixes for IDL event processing:
1. idl.go: include EventType in dedup key so Deassert events are no
longer silently dropped as duplicates of their Assert counterparts.
2. gpu_status.go: treat Deassert events as clearing all GPU faults —
previously the code re-applied the same faulty GPU set from the
description, leaving GPUs stuck in Critical even after alarm cleared.
3. reanimator_models/converter: add bmc_event_summary section to the
Reanimator export — a deduplicated Critical/Warning event table with
Active/Resolved status derived from Assert/Deassert pairs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When Inspur component.log sections return {"error":"...","code":N} instead
of hardware data, the parser now:
- stores them in AnalysisResult.CollectionErrors (new model field)
- mirrors each one into result.Events with Source="BMC/<section>"
so the chart viewer event table shows the specific BMC module
- feeds them into /api/parse-errors as bmc_collection_error entries
UI adds a collapsible "Collection diagnostics" panel below the chart
iframe (outside /chart) that appears when /api/parse-errors returns
any items; resets on data clear.
Affected sections in this dump: HDD (1458), PCIe Devices (1458),
Network Adapters (1458), Disk Backplane.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The PSU regex used "RESTful Network" as its end anchor, but in standard
Inspur component.log layout the PCIE Device section sits between PSU and
Network Adapter. The lazy [\s\S]*? captured across the PCIE error block,
producing invalid JSON and silently dropping all PSU data.
Changed anchor to RESTful (?:PCIE|Network) — matches whichever section
immediately follows PSU in a given archive.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When BMC firmware fails to read capacity for a present DIMM, size_mb stays
0. If another DIMM with the same part number in the same batch has a known
size, use it to fill the gap.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Dedup by version caused CPU1 Microcode to be omitted when both CPUs run
the same version, leaving the firmware column blank for the second socket.
Each CPU gets its own firmware entry keyed by index.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two bugs in onekeylog archives that lack asset.json:
- CPU count was always 0: ParseComponentLog never parsed the "RESTful CPU
info" section. Added parseCPUInfo as a fallback when hw.CPUs is empty
(asset.json remains the primary source when present). Also worked around
a Go JSON case-insensitive collision between "proc_id" (int) and
"PROC_ID" (string CPUID) by adding an explicit PROC_ID field with an
exact-case tag.
- Only 1 of 2 DIMMs shown: Present condition required mem_mod_size > 0,
but some BMC firmware reports size=0 for a physically installed module
while still providing serial and part number. Now treats a DIMM as
present when status=1 and any of size/serial/partnum is non-empty.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Supermicro HGX exposes each GPU under both Chassis/1/PCIeDevices and a
dedicated Chassis/HGX_GPU_SXM_N/PCIeDevices. gpuDocDedupKey was keying
by @odata.id path, so identical GPUs with the same serial were not
deduplicated across sources. Now stable identifiers (serial → BDF →
slot+model) take priority over path.
Also includes Inspur parser improvements: NVMe model/serial enrichment
from devicefrusdr.log and audit.log, RAID drive slot normalization to
BP notation, PSU slot normalization, BMC/CPLD/VR firmware from RESTful
version info section, and parser version bump to 1.8.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parser / archive:
- Add .sds extension as tar-format alias (archive.go)
- Add tests for multipart upload size limits (multipart_limits_test.go)
- Remove supermicro crashdump parser (ADL-015)
Dell parser:
- Remove GPU duplicates from PCIeDevices (DCIM_VideoView vs DCIM_PCIDeviceView
both list the same GPU; VideoView record is authoritative)
Server:
- Add LOGPILE_CONVERT_MAX_MB env var for independent convert batch size limit
- Improve "file too large" error message with current limit value
Web:
- Add CONVERT_MAX_FILES_PER_BATCH = 1000 cap
- Minor UI copy and CSS fixes
Bible:
- bible-local/06-parsers.md: add pci.ids enrichment rule (enrich model from
pciids when name is empty but vendor_id+device_id are present)
- Sync bible submodule and local overview/architecture docs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Dell NICView: strip " - XX:XX:XX:XX:XX:XX" suffix from ProductName
(Dell TSR embeds MAC in this field for every NIC port)
- Dell SoftwareIdentity: same strip applied to ElementName; store FQDD
in FirmwareInfo.Description so exporter can filter device-bound entries
- Exporter: add isDeviceBoundFirmwareFQDD() to filter firmware entries
whose Description matches NIC./PSU./Disk./RAID.Backplane./GPU. FQDD
prefixes (prevents device firmware from appearing in hardware.firmware)
- Exporter: extend isDeviceBoundFirmwareName() to filter HGX GPU/NVSwitch
firmware inventory IDs (_fw_gpu_, _fw_nvswitch_, _inforom_gpu_)
- Inspur: remove HDD firmware from Hardware.Firmware — already present
in Storage.Firmware, duplicating it violates ADL-016
- bible-local/06-parsers.md: document firmware and MAC stripping rules
- bible-local/10-decisions.md: add ADL-016 (device-bound firmware) and
ADL-017 (vendor-embedded MAC in model name fields)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Major improvements:
- Add CSV SEL event parser for Kaytus firmware format
- Add PCIe device parser with link speed/width detection
- Add GPU temperature and PCIe link monitoring
- Add disk backplane parser for storage bay information
- Fix memory module detection (only show installed DIMMs)
Parser enhancements:
- Parse RESTful PCIe Device info (max/current link width/speed)
- Parse GPU sensor data (core and memory temperatures)
- Parse diskbackplane info (slot count, installed drives)
- Parse SEL events from CSV format (selelist.csv)
- Fix memory Present status logic (check mem_mod_status)
Web interface improvements:
- Add PCIe link degradation highlighting (red when current < max)
- Add storage table with Present status and location
- Update memory specification to show only installed modules with frequency
- Sort events from newest to oldest
- Filter out N/A serial numbers from display
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add parser versioning with Version() method and version display on main screen
- Add server model and serial number to Configuration tab and TXT export
- Add auto-browser opening on startup with --no-browser flag
- Add Restart and Exit buttons with graceful shutdown
- Add section overview stats (CPU, Power, Storage, GPU, Network)
- Change PCIe Link display to "x16 PCIe Gen4" format
- Add Location column to Serials section
- Extract BoardInfo from FRU and PlatformId from ThermalConfig
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Redesign config page with tabs: Spec, CPU, Memory, Power, Storage, GPU, Network, PCIe
- Parse detailed memory info from component.log with all fields:
Location, Present, Size, Type, Max/Current Speed, Manufacturer, Part Number, Status
- Add GPU model extraction from PCIe devices
- Add NetworkAdapter model with detailed fields from RESTful API
- Update PSU model with power metrics (input/output power, voltage, temperature)
- Memory modules with 0GB size (failed) highlighted in warning color
- Add memory overview stats (total GB, installed count, active count)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
mchusandClaude Sonnet 5