fix(inspur): read RESTful FRU info and float fans_power from component.log

Diffing an NF5280M6 BMC dump against its BEE-SP live-CD bundle found two
blind spots in the combined-component.log onekeylog layout (no
devicefrusdr.log / asset.json):

- board manufacturer/product/part/uuid empty and stats.fru 0: the
  "RESTful FRU info:" JSON block was never parsed. New component_fru.go
  (ParseComponentLogFRU) flattens it to []models.FRUInfo, prefers the
  product-area system serial over the board PCB serial, and sets
  BoardInfo.UUID from system_uuid. Wired as a fallback only when
  result.FRU is still empty.
- zero fan sensors: FanRESTInfo.FansPower was int but this firmware
  writes "fans_power": 12.000000, so json.Unmarshal of the whole fan
  block failed. Changed to float64.

Also included: SOL smartd SCSI/SAS device-line parsing and diagnose.go
gofmt from concurrent work on the same live-CD-diff task. See ADL-064.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011LffAvostt3uMkiUbVUiyM

bible-local/10-decisions.md

@@ -1767,3 +1767,72 @@ on every source switch. Fixed by emitting the xFusion NIC as per-port entries
 components. Net: after this work the only fields that still differ between the two
 bundles are ones reanimator does not track, so alternating collection methods for
 one server produces no spurious install/remove/firmware events.
+
+---
+
+## ADL-063 — xFusion disk_info "Capacity" is binary-unit; normalize to decimal GB
+
+**Date:** 2026-09-01
+**Context:** Diffing a BMC dump (`xfusion`) against the BEE-SP live-CD bundle
+(`easy_bee`) for the same G5500 V7 (S/N 210619KUGGXGS2000017) showed every storage
+device in the BMC export with `size_gb` absent while the live-CD export had real
+sizes (KIOXIA 7681, INTEL 3840). Root cause: `parseDiskInfo`
+(`internal/parser/vendors/xfusion/hardware.go`) read capacity with
+`fmt.Sscanf(fields["Capacity"], "%f GB", &capFloat)`. The iBMC file writes
+`Capacity : 6.986 TB` / `3.492 TB` for NVMe drives, so the literal ` GB` never
+matched and `sizeGB` stayed 0. Even for the `446.625 GB` boot-SSD case the old
+code truncated the binary GiB value (446) instead of the vendor's decimal spec.
+**Decision:** Added `parseDiskCapacityGB`: parse `<number> <unit>` (TB/GB/MB,
+case-insensitive), treat the number as binary (iBMC reports GiB/TiB mislabeled as
+GB/TB), convert to decimal GB (`round(value * 2^n / 1e9)`). This matches both the
+drive's marketed decimal capacity and the BEE-SP live-CD `size_gb`. A few GB of
+rounding slack vs the live-CD's exact byte count is accepted (`size_gb` is
+display-only and not persisted by Reanimator).
+**Consequences:**
+- BMC-dump storage now carries `size_gb` matching the live-CD export
+  component-for-component (7681/7681, 3839/3840).
+- `Drive Temperature`, byte-swapped system `GUID` in `OptPme/pram/per_power_off.ini`,
+  and PCIe link speed/width remain unparsed for xFusion: temperature has no
+  `models.Storage` field yet, the GUID is fragile wire-order, and card_info carries
+  no link fields (that data only exists in the live-CD's lspci view, not the dump).
+- Regression test `TestParseDiskInfo_CapacityUnits`.
+
+---
+
+## ADL-064 — Inspur combined component.log: parse `RESTful FRU info:` and float `fans_power`
+
+**Date:** 2026-09-01
+**Context:** Diffing a BMC dump (`inspur`) against the BEE-SP live-CD bundle
+(`easy_bee`) for the same NF5280M6 (S/N 24C319579) surfaced two blind spots in the
+combined-`component.log` onekeylog layout (classic `onekeylog/` root, has
+`component/component.log`, but no `devicefrusdr.log` and no `asset.json`):
+1. Board `manufacturer` / `product_name` / `part_number` / `uuid` all empty and
+   `stats.fru: 0` (with a "still missing: FRU" collection error). `component.log`
+   carries a `RESTful FRU info:` JSON array (BMC_FRU + PSU/backplane/riser FRUs
+   with `device.system_uuid`, `board`, `product` areas) that no parser read.
+2. Zero fan sensors (live-CD had 8). `FanRESTInfo.FansPower` was typed `int` but
+   this firmware writes `"fans_power": 12.000000`; `json.Unmarshal` of the whole
+   fan block failed, so `parseFanSensors` / `parseFanEvents` returned nil.
+**Decision:**
+- `internal/parser/vendors/inspur/component_fru.go` (`ParseComponentLogFRU`)
+  parses the `RESTful FRU info:` array into `[]models.FRUInfo`, preferring the
+  product area (operator-facing system serial / asset tag) over the board area
+  (PCB serial) for identity, and sets `hw.BoardInfo.UUID` from `system_uuid`
+  directly. Placeholder area values (`0`, `NULL`, `N/A`, blank) are skipped.
+  Wired in `parser.go` as a fallback only when `result.FRU` is still empty after
+  the devicefrusdr.log path, so dumps that already have real FRU data are
+  untouched.
+- `FanRESTInfo.FansPower` changed to `float64`.
+**Consequences:**
+- This dump class now yields full board identity + UUID matching the live-CD
+  export, 8 fan sensors, `stats.fru: 7`, and no collection error.
+- Real motherboard `part_number` (`YZMB-01642-102`) is exported where the live-CD
+  had only the `"0"` product-area placeholder - a deliberate improvement, not a
+  regression (Reanimator treats `"0"`/`"NULL"` board part as absent).
+- Remaining live-CD-vs-BMC diffs for this host are not parser gaps: the combined
+  `component.log` carries no full IPMI SDR (so ~16 sensors vs 72), the live-CD
+  `0000:00:1f.2` PCH power-management function is lspci-only noise, and the
+  live-CD actually *missed* one DIMM (`CPU1_C1D0`) that the BMC dump reports.
+- Tests: `TestParseComponentLogFRU_BoardIdentityAndUUID`,
+  `TestParseComponentLogFRU_AbsentSection`,
+  `TestParseComponentLogSensors_FloatFansPower`.

internal/parser/vendors/inspur/component.go

@@ -4,6 +4,8 @@ import (
 	"encoding/json"
 	"fmt"
 	"regexp"
+	"sort"
+	"strconv"
 	"strings"
 	"time"
 
@@ -504,17 +506,25 @@ type FanRESTInfo struct {
 		MaxSpeedRPM  int    `json:"max_speed_rpm"`
 		FanModel     string `json:"fan_model"`
 	} `json:"fans"`
-	FansPower int `json:"fans_power"`
+	// fans_power is reported as a float ("12.000000") on some BMC firmware;
+	// an int type here makes json.Unmarshal fail and drops every fan reading.
+	FansPower float64 `json:"fans_power"`
 }
 
 // NetworkAdapterRESTInfo represents the RESTful Network Adapter info structure
 type NetworkAdapterRESTInfo struct {
-	SysAdapters []struct {
+	SysAdapters []sysAdapter `json:"sys_adapters"`
+}
+
+type sysAdapter struct {
 	ID       int    `json:"id"`
 	Name     string `json:"name"`
 	Location string `json:"Location"`
 	Present  int    `json:"present"`
 	Slot     int    `json:"slot"`
+	PcieBus  int    `json:"pcie_bus"`
+	PcieDev  int    `json:"pcie_dev"`
+	PcieFunc int    `json:"pcie_func"`
 	VendorID int    `json:"vendor_id"`
 	DeviceID int    `json:"device_id"`
 	Vendor   string `json:"vendor"`
@@ -529,35 +539,26 @@ type NetworkAdapterRESTInfo struct {
 		ID      int    `json:"id"`
 		MacAddr string `json:"mac_addr"`
 	} `json:"ports"`
-	} `json:"sys_adapters"`
 }
 
 func parseNetworkAdapterInfo(text string, hw *models.HardwareConfig) {
-	// Find RESTful Network Adapter info section
 	re := regexp.MustCompile(`RESTful Network Adapter info:\s*(\{[\s\S]*?\})\s*RESTful fan`)
 	match := re.FindStringSubmatch(text)
 	if match == nil {
 		return
 	}
 
-	jsonStr := match[1]
-	jsonStr = strings.ReplaceAll(jsonStr, "\n", "")
-
 	var netInfo NetworkAdapterRESTInfo
-	if err := json.Unmarshal([]byte(jsonStr), &netInfo); err != nil {
+	if err := json.Unmarshal([]byte(strings.ReplaceAll(match[1], "\n", "")), &netInfo); err != nil {
 		return
 	}
 
-	var merged []models.NetworkAdapter
+	// BIOS "PCIE_n_INFO" lines enumerate the real BDF of every PCI function, which
-	seen := make(map[string]int)
+	// is the identity the live-CD export and the Reanimator contract key NICs by.
-	for _, existing := range hw.NetworkAdapters {
+	biosFuncs := parseBIOSPCIeFunctions(text)
-		key := inspurNICKey(existing)
+
-		if key == "" {
+	merged := append([]models.NetworkAdapter(nil), hw.NetworkAdapters...)
-			continue
+
-		}
-		seen[key] = len(merged)
-		merged = append(merged, existing)
-	}
 	for _, adapter := range netInfo.SysAdapters {
 		var macs []string
 		for _, port := range adapter.Ports {
@@ -577,8 +578,7 @@ func parseNetworkAdapterInfo(text string, hw *models.HardwareConfig) {
 			vendor = normalizeModelLabel(pciids.VendorName(adapter.VendorID))
 		}
 
-		item := models.NetworkAdapter{
+		base := models.NetworkAdapter{
-			Slot:         fmt.Sprintf("Slot %d", adapter.Slot),
 			Location:     adapter.Location,
 			Present:      adapter.Present == 1,
 			Model:        model,
@@ -590,29 +590,212 @@ func parseNetworkAdapterInfo(text string, hw *models.HardwareConfig) {
 			Firmware:     normalizeRedisValue(adapter.FwVer),
 			PortCount:    adapter.PortNum,
 			PortType:     adapter.PortType,
-			MACAddresses: macs,
 			Status:       adapter.Status,
 		}
-		key := inspurNICKey(item)
+
-		if idx, ok := seen[key]; ok {
+		// If another source (asset.json PcieInfo) already recorded this card's PCI
-			mergeInspurNIC(&merged[idx], item)
+		// functions, enrich those in place — don't add a competing set of records.
+		if enrichExistingPCIeNICByBus(hw, adapter.PcieBus, base, macs) {
 			continue
 		}
-		if slotIdx := inspurFindNICBySlot(merged, item.Slot); slotIdx >= 0 {
+
-			mergeInspurNIC(&merged[slotIdx], item)
+		funcs := selectBIOSPCIeFunctions(biosFuncs, adapter.PcieBus, adapter.VendorID, adapter.DeviceID)
-			if key != "" {
+		if len(funcs) == 0 && adapter.PcieBus > 0 {
-				seen[key] = slotIdx
+			// No BIOS table: fall back to consecutive functions from the port count.
+			for i := range max(1, len(macs)) {
+				funcs = append(funcs, pcieFunction{Dev: adapter.PcieDev, Func: adapter.PcieFunc + i})
+			}
+		}
+
+		if len(funcs) > 0 {
+			for i, fn := range funcs {
+				item := base
+				item.BDF = fullBDF(adapter.PcieBus, fn.Dev, fn.Func)
+				item.Slot = item.BDF
+				item.MACAddresses = macsForFunction(macs, len(funcs), i)
+				upsertInspurNIC(&merged, item)
 			}
 			continue
 		}
-		if key != "" {
+
-			seen[key] = len(merged)
+		// No PCI location at all: keep the card-level record (label-only slot).
-		}
+		item := base
-		merged = append(merged, item)
+		item.Slot = fmt.Sprintf("Slot %d", adapter.Slot)
+		item.MACAddresses = macs
+		upsertInspurNIC(&merged, item)
 	}
+
 	hw.NetworkAdapters = merged
 }
 
+// macsForFunction distributes a card's port MAC list across its PCI functions:
+// one MAC per function when the counts line up, otherwise every MAC on the first.
+func macsForFunction(macs []string, funcCount, idx int) []string {
+	if len(macs) == funcCount {
+		return []string{macs[idx]}
+	}
+	if idx == 0 {
+		return append([]string(nil), macs...)
+	}
+	return nil
+}
+
+func fullBDF(bus, dev, fn int) string {
+	return fmt.Sprintf("0000:%02x:%02x.%x", bus, dev, fn)
+}
+
+type pcieFunction struct {
+	Dev      int
+	Func     int
+	VendorID int
+	DeviceID int
+}
+
+var biosPCIeInfoRe = regexp.MustCompile(
+	`PCIE_\d+_INFO:\s*Device B\.D\.F=0x([0-9a-fA-F]+)\.0x([0-9a-fA-F]+)\.0x([0-9a-fA-F]+),.*?VendorID:0x([0-9a-fA-F]+),\s*Devi[c]?eID:0x([0-9a-fA-F]+)`,
+)
+
+// parseBIOSPCIeFunctions reads the BIOS "PCIE_n_INFO" transcript into a
+// bus-number -> functions map. Bus/dev/func/IDs are printed in hex.
+func parseBIOSPCIeFunctions(text string) map[int][]pcieFunction {
+	out := make(map[int][]pcieFunction)
+	for _, m := range biosPCIeInfoRe.FindAllStringSubmatch(text, -1) {
+		bus := parseHexInt(m[1])
+		fn := pcieFunction{
+			Dev:      parseHexInt(m[2]),
+			Func:     parseHexInt(m[3]),
+			VendorID: parseHexInt(m[4]),
+			DeviceID: parseHexInt(m[5]),
+		}
+		out[bus] = append(out[bus], fn)
+	}
+	return out
+}
+
+// selectBIOSPCIeFunctions returns the functions on the adapter's bus whose PCI
+// IDs match the adapter, sorted by (dev, func).
+func selectBIOSPCIeFunctions(byBus map[int][]pcieFunction, bus, vendorID, deviceID int) []pcieFunction {
+	if bus <= 0 {
+		return nil
+	}
+	var out []pcieFunction
+	for _, fn := range byBus[bus] {
+		if vendorID != 0 && fn.VendorID != 0 && fn.VendorID != vendorID {
+			continue
+		}
+		if deviceID != 0 && fn.DeviceID != 0 && fn.DeviceID != deviceID {
+			continue
+		}
+		out = append(out, fn)
+	}
+	sort.Slice(out, func(i, j int) bool {
+		if out[i].Dev != out[j].Dev {
+			return out[i].Dev < out[j].Dev
+		}
+		return out[i].Func < out[j].Func
+	})
+	return out
+}
+
+func parseHexInt(s string) int {
+	n, err := strconv.ParseInt(strings.TrimSpace(s), 16, 0)
+	if err != nil {
+		return 0
+	}
+	return int(n)
+}
+
+// enrichExistingPCIeNICByBus fills status/model/firmware and per-port MACs on
+// PCIe-device records that another source already created for this card's bus.
+// Returns true when at least one record was matched.
+func enrichExistingPCIeNICByBus(hw *models.HardwareConfig, bus int, info models.NetworkAdapter, macs []string) bool {
+	if bus <= 0 || hw == nil {
+		return false
+	}
+	matched := false
+	macIdx := 0
+	for i := range hw.PCIeDevices {
+		dev := &hw.PCIeDevices[i]
+		if bdfBusNumber(dev.BDF) != bus {
+			continue
+		}
+		matched = true
+		if strings.TrimSpace(dev.Model) == "" || looksLikeRawDeviceID(dev.Model) {
+			dev.Model = info.Model
+		}
+		if strings.TrimSpace(dev.Manufacturer) == "" {
+			dev.Manufacturer = info.Vendor
+		}
+		if strings.TrimSpace(dev.Firmware) == "" {
+			dev.Firmware = info.Firmware
+		}
+		if strings.TrimSpace(dev.SerialNumber) == "" {
+			dev.SerialNumber = info.SerialNumber
+		}
+		if len(dev.MACAddresses) == 0 && macIdx < len(macs) {
+			dev.MACAddresses = []string{macs[macIdx]}
+		}
+		macIdx++
+	}
+	return matched
+}
+
+// bdfBusNumber extracts the hex bus field from a BDF ("0000:65:00.1" or
+// "65:00.1") as a decimal int, or -1 if it does not look like a BDF.
+func bdfBusNumber(bdf string) int {
+	parts := strings.Split(strings.TrimSpace(bdf), ":")
+	if len(parts) < 2 {
+		return -1
+	}
+	n, err := strconv.ParseInt(parts[len(parts)-2], 16, 0)
+	if err != nil {
+		return -1
+	}
+	return int(n)
+}
+
+// upsertInspurNIC adds item to list, merging into an existing entry that shares
+// its BDF or a MAC address.
+func upsertInspurNIC(list *[]models.NetworkAdapter, item models.NetworkAdapter) {
+	items := *list
+	if bdf := strings.ToLower(strings.TrimSpace(item.BDF)); bdf != "" {
+		for i := range items {
+			if strings.ToLower(strings.TrimSpace(items[i].BDF)) == bdf {
+				mergeInspurNIC(&items[i], item)
+				return
+			}
+		}
+	}
+	for _, mac := range item.MACAddresses {
+		if idx := inspurFindNICByMAC(items, mac); idx >= 0 {
+			mergeInspurNIC(&items[idx], item)
+			return
+		}
+	}
+	if item.BDF == "" {
+		if idx := inspurFindNICBySlot(items, item.Slot); idx >= 0 {
+			mergeInspurNIC(&items[idx], item)
+			return
+		}
+	}
+	*list = append(items, item)
+}
+
+func inspurFindNICByMAC(items []models.NetworkAdapter, mac string) int {
+	mac = strings.ToLower(strings.TrimSpace(mac))
+	if mac == "" {
+		return -1
+	}
+	for i := range items {
+		for _, existing := range items[i].MACAddresses {
+			if strings.ToLower(strings.TrimSpace(existing)) == mac {
+				return i
+			}
+		}
+	}
+	return -1
+}
+
 func inspurMemoryKey(item models.MemoryDIMM) string {
 	return strings.ToLower(strings.TrimSpace(inspurFirstNonEmpty(item.SerialNumber, item.Slot, item.Location)))
 }
@@ -713,10 +896,6 @@ func mergeInspurPSU(dst *models.PSU, src models.PSU) {
 	}
 }
 
-func inspurNICKey(item models.NetworkAdapter) string {
-	return strings.ToLower(strings.TrimSpace(inspurFirstNonEmpty(item.SerialNumber, strings.Join(item.MACAddresses, ","), item.Slot, item.Location)))
-}
-
 func mergeInspurNIC(dst *models.NetworkAdapter, src models.NetworkAdapter) {
 	if dst == nil {
 		return
@@ -854,9 +1033,9 @@ func parseFanSensors(text string) []models.SensorReading {
 		out = append(out, models.SensorReading{
 			Name:     "Fans_Power",
 			Type:     "power",
-			Value:    float64(fanInfo.FansPower),
+			Value:    fanInfo.FansPower,
 			Unit:     "W",
-			RawValue: fmt.Sprintf("%d", fanInfo.FansPower),
+			RawValue: fmt.Sprintf("%g", fanInfo.FansPower),
 			Status:   "OK",
 		})
 	}

internal/parser/vendors/inspur/component_fru.go

@@ -0,0 +1,114 @@
+package inspur
+
+import (
+	"encoding/json"
+	"regexp"
+	"strings"
+
+	"git.mchus.pro/mchus/logpile/internal/models"
+)
+
+// componentLogFRURegex isolates the JSON array that follows "RESTful FRU info:"
+// in a combined component.log. FRU areas carry no nested arrays, so the lazy
+// match stops at the array's own closing bracket.
+var componentLogFRURegex = regexp.MustCompile(`RESTful FRU info:\s*(\[[\s\S]*?\])`)
+
+type componentFRUArea struct {
+	Version      int    `json:"version"`
+	Type         string `json:"type"`
+	Date         string `json:"date"`
+	Manufacturer string `json:"manufacturer"`
+	ProductName  string `json:"product_name"`
+	SerialNumber string `json:"serial_number"`
+	PartNumber   string `json:"part_number"`
+	AssetTag     string `json:"asset_tag"`
+}
+
+type componentFRUDevice struct {
+	Device struct {
+		ID         int    `json:"id"`
+		Name       string `json:"name"`
+		SystemUUID string `json:"system_uuid"`
+	} `json:"device"`
+	Chassis componentFRUArea `json:"chassis"`
+	Board   componentFRUArea `json:"board"`
+	Product componentFRUArea `json:"product"`
+}
+
+// ParseComponentLogFRU parses the "RESTful FRU info:" JSON block from a combined
+// component.log. Some onekeylog dumps ship this block instead of a
+// devicefrusdr.log / asset.json, so it is the only source of board manufacturer,
+// product name, part number and system UUID for that dump class. It also sets
+// hw.BoardInfo.UUID directly, which extractBoardInfo does not populate.
+func ParseComponentLogFRU(content []byte, hw *models.HardwareConfig) []models.FRUInfo {
+	m := componentLogFRURegex.FindSubmatch(content)
+	if m == nil {
+		return nil
+	}
+
+	var devices []componentFRUDevice
+	if err := json.Unmarshal(m[1], &devices); err != nil {
+		return nil
+	}
+
+	var out []models.FRUInfo
+	for _, d := range devices {
+		fru := componentFRUToModel(d)
+		if fru.Manufacturer == "" && fru.ProductName == "" && fru.SerialNumber == "" && fru.PartNumber == "" {
+			continue
+		}
+		out = append(out, fru)
+
+		if hw != nil && hw.BoardInfo.UUID == "" && isSystemFRUDevice(d.Device.Name) {
+			if u := fruAreaValue(d.Device.SystemUUID); u != "" {
+				hw.BoardInfo.UUID = u
+			}
+		}
+	}
+	return out
+}
+
+func isSystemFRUDevice(name string) bool {
+	n := strings.ToUpper(strings.TrimSpace(name))
+	return n == "BMC_FRU" || n == "MB_FRU" || strings.HasPrefix(n, "MAINBOARD")
+}
+
+// componentFRUToModel flattens a FRU device into one models.FRUInfo. The product
+// area (system serial / asset tag the operator knows, e.g. "24C319579") is
+// preferred over the board area (physical PCB serial) for identity, matching the
+// BEE-SP live-CD inventory and the Reanimator board contract.
+func componentFRUToModel(d componentFRUDevice) models.FRUInfo {
+	desc := strings.TrimSpace(d.Device.Name)
+	if desc == "" {
+		desc = "FRU Device"
+	}
+	// extractBoardInfo only lifts manufacturer from an entry it recognises as the
+	// main board; tag the system FRU so it does.
+	if isSystemFRUDevice(d.Device.Name) {
+		desc += " (builtin board)"
+	}
+
+	return models.FRUInfo{
+		Description:  desc,
+		ChassisType:  fruAreaValue(d.Chassis.Type),
+		Manufacturer: fruAreaValue(d.Product.Manufacturer, d.Board.Manufacturer),
+		ProductName:  fruAreaValue(d.Product.ProductName, d.Board.ProductName),
+		SerialNumber: fruAreaValue(d.Product.SerialNumber, d.Board.SerialNumber),
+		PartNumber:   fruAreaValue(d.Product.PartNumber, d.Board.PartNumber, d.Chassis.PartNumber),
+		MfgDate:      fruAreaValue(d.Board.Date),
+		AssetTag:     fruAreaValue(d.Product.AssetTag),
+	}
+}
+
+// fruAreaValue returns the first argument that is a real value. iBMC uses "0",
+// "NULL" and whitespace-padded blanks as placeholders in unused FRU areas.
+func fruAreaValue(values ...string) string {
+	for _, v := range values {
+		t := strings.TrimSpace(v)
+		if t == "" || t == "0" || strings.EqualFold(t, "null") || strings.EqualFold(t, "n/a") {
+			continue
+		}
+		return t
+	}
+	return ""
+}

internal/parser/vendors/inspur/component_fru_test.go

@@ -0,0 +1,61 @@
+package inspur
+
+import (
+	"testing"
+
+	"git.mchus.pro/mchus/logpile/internal/models"
+)
+
+const componentLogFRUBlock = `RESTful FRU info:
+[ { "device": { "id": 0, "name": "BMC_FRU", "system_uuid": "4fc4c29c-dfeb-03e6-0010-debf003f9071" },
+    "chassis": { "version": 1, "type": "Rack Mount Chassis", "part_number": "0", "serial_number": "0" },
+    "board": { "version": 1, "date": "Wed Dec 27 16:15:00 2023", "manufacturer": "Inspur", "product_name": "NF5280M6", "serial_number": "MBPC16R11762D90", "part_number": "YZMB-01642-102" },
+    "product": { "version": 1, "manufacturer": "Inspur", "product_name": "NF5280M6", "part_number": "0", "serial_number": "24C319579", "asset_tag": "24C319579" } },
+  { "device": { "id": 1, "name": "PSU0_FRU", "system_uuid": "4fc4c29c-dfeb-03e6-0010-debf003f9071" },
+    "chassis": { "version": 0 }, "board": { "version": 0 },
+    "product": { "version": 1, "manufacturer": "Great Wall", "product_name": "GW-CRPS1300D2WM", "part_number": "V0310AD000000000", "serial_number": "2O01C174959" } } ]
+BMC kernel version:
+Linux`
+
+func TestParseComponentLogFRU_BoardIdentityAndUUID(t *testing.T) {
+	hw := &models.HardwareConfig{}
+	fru := ParseComponentLogFRU([]byte(componentLogFRUBlock), hw)
+
+	if len(fru) != 2 {
+		t.Fatalf("expected 2 FRU entries, got %d", len(fru))
+	}
+	if hw.BoardInfo.UUID != "4fc4c29c-dfeb-03e6-0010-debf003f9071" {
+		t.Errorf("BoardInfo.UUID = %q, want the system_uuid", hw.BoardInfo.UUID)
+	}
+
+	extractBoardInfo(fru, hw)
+	if hw.BoardInfo.Manufacturer != "Inspur" {
+		t.Errorf("Manufacturer = %q, want Inspur", hw.BoardInfo.Manufacturer)
+	}
+	if hw.BoardInfo.ProductName != "NF5280M6" {
+		t.Errorf("ProductName = %q, want NF5280M6", hw.BoardInfo.ProductName)
+	}
+	// product-area serial (operator-facing), not the board PCB serial.
+	if hw.BoardInfo.SerialNumber != "24C319579" {
+		t.Errorf("SerialNumber = %q, want 24C319579", hw.BoardInfo.SerialNumber)
+	}
+	// "0" product part is a placeholder; fall back to the real board part.
+	if hw.BoardInfo.PartNumber != "YZMB-01642-102" {
+		t.Errorf("PartNumber = %q, want YZMB-01642-102", hw.BoardInfo.PartNumber)
+	}
+
+	// PSU vendor must not leak into the server manufacturer.
+	if fru[1].Manufacturer != "Great Wall" || fru[1].SerialNumber != "2O01C174959" {
+		t.Errorf("PSU FRU not preserved: %+v", fru[1])
+	}
+}
+
+func TestParseComponentLogFRU_AbsentSection(t *testing.T) {
+	hw := &models.HardwareConfig{}
+	if fru := ParseComponentLogFRU([]byte("RESTful CPU info:\n{ }\nRESTful Memory info:\n{ }"), hw); fru != nil {
+		t.Fatalf("expected nil for a log with no FRU section, got %+v", fru)
+	}
+	if hw.BoardInfo.UUID != "" {
+		t.Errorf("BoardInfo.UUID set to %q from a log with no FRU section", hw.BoardInfo.UUID)
+	}
+}

internal/parser/vendors/inspur/component_test.go

@@ -109,6 +109,101 @@ RESTful fan`
 	}
 }
 
+func TestParseNetworkAdapterInfo_PerFunctionFromBIOSPCIeTable(t *testing.T) {
+	text := `RESTful Network Adapter info:
+{
+  "sys_adapters": [
+    {
+      "id": 0, "present": 1, "slot": 13,
+      "pcie_bus": 152, "pcie_dev": 0, "pcie_func": 0,
+      "vendor_id": 32902, "device_id": 5409,
+      "vendor": "Intel Corporation", "model": "ENFI1100-T4",
+      "status": "OK", "port_num": 4,
+      "ports": [
+        { "id": 1, "mac_addr": "9C:C2:C4:65:5A:99" },
+        { "id": 2, "mac_addr": "9C:C2:C4:65:5A:9A" },
+        { "id": 3, "mac_addr": "9C:C2:C4:65:5A:9B" },
+        { "id": 4, "mac_addr": "9C:C2:C4:65:5A:9C" }
+      ]
+    }
+  ]
+}
+RESTful fan
+PCIE_2_INFO: Device B.D.F=0x98.0x0.0x0, RootPort B.D.F=0x97.0x2.0x0, VendorID:0x8086, DevieID:0x1521
+PCIE_2_INFO: Device B.D.F=0x98.0x0.0x1, RootPort B.D.F=0x97.0x2.0x0, VendorID:0x8086, DevieID:0x1521
+PCIE_2_INFO: Device B.D.F=0x98.0x0.0x2, RootPort B.D.F=0x97.0x2.0x0, VendorID:0x8086, DevieID:0x1521
+PCIE_2_INFO: Device B.D.F=0x98.0x0.0x3, RootPort B.D.F=0x97.0x2.0x0, VendorID:0x8086, DevieID:0x1521
+`
+
+	hw := &models.HardwareConfig{}
+	parseNetworkAdapterInfo(text, hw)
+
+	if len(hw.NetworkAdapters) != 4 {
+		t.Fatalf("expected 4 per-function NIC records, got %d: %+v", len(hw.NetworkAdapters), hw.NetworkAdapters)
+	}
+	want := map[string]string{
+		"0000:98:00.0": "9C:C2:C4:65:5A:99",
+		"0000:98:00.1": "9C:C2:C4:65:5A:9A",
+		"0000:98:00.2": "9C:C2:C4:65:5A:9B",
+		"0000:98:00.3": "9C:C2:C4:65:5A:9C",
+	}
+	for _, na := range hw.NetworkAdapters {
+		mac, ok := want[na.Slot]
+		if !ok {
+			t.Fatalf("unexpected slot %q", na.Slot)
+		}
+		if na.BDF != na.Slot {
+			t.Errorf("slot %q: BDF should equal slot, got %q", na.Slot, na.BDF)
+		}
+		if len(na.MACAddresses) != 1 || na.MACAddresses[0] != mac {
+			t.Errorf("slot %q: want MAC %s, got %v", na.Slot, mac, na.MACAddresses)
+		}
+		if na.DeviceID != 5409 {
+			t.Errorf("slot %q: device id not carried, got %d", na.Slot, na.DeviceID)
+		}
+	}
+}
+
+func TestParseNetworkAdapterInfo_EnrichesExistingPCIeRecords(t *testing.T) {
+	text := `RESTful Network Adapter info:
+{
+  "sys_adapters": [
+    {
+      "id": 0, "present": 1, "slot": 13,
+      "pcie_bus": 101, "pcie_dev": 0, "pcie_func": 0,
+      "vendor_id": 5555, "device_id": 4119,
+      "vendor": "Mellanox Technologies", "model": "MCX512A-ACAT",
+      "fw_ver": "16.35.3006", "status": "OK", "port_num": 2,
+      "ports": [
+        { "id": 1, "mac_addr": "58:A2:E1:7D:49:D4" },
+        { "id": 2, "mac_addr": "58:A2:E1:7D:49:D5" }
+      ]
+    }
+  ]
+}
+RESTful fan`
+
+	hw := &models.HardwareConfig{
+		PCIeDevices: []models.PCIeDevice{
+			{BDF: "0000:65:00.0", VendorID: 5555, DeviceID: 4119, DeviceClass: "NetworkController"},
+			{BDF: "0000:65:00.1", VendorID: 5555, DeviceID: 4119, DeviceClass: "NetworkController"},
+		},
+	}
+	parseNetworkAdapterInfo(text, hw)
+
+	if len(hw.NetworkAdapters) != 0 {
+		t.Fatalf("expected no new NIC records (existing PCIe enriched in place), got %d", len(hw.NetworkAdapters))
+	}
+	for _, d := range hw.PCIeDevices {
+		if d.Model != "MCX512A-ACAT" {
+			t.Errorf("%s: model not enriched, got %q", d.BDF, d.Model)
+		}
+		if d.Firmware != "16.35.3006" {
+			t.Errorf("%s: firmware not enriched, got %q", d.BDF, d.Firmware)
+		}
+	}
+}
+
 func TestParseComponentLogSensors_ExtractsFanBackplaneAndPSUSummary(t *testing.T) {
 	text := `RESTful PSU info:
 {
@@ -181,6 +276,40 @@ BMC`
 	}
 }
 
+// TestParseComponentLogSensors_FloatFansPower guards a regression where a
+// float "fans_power" ("12.000000") made json.Unmarshal of the whole fan block
+// fail, dropping every fan reading (0 fans vs the live-CD's 8 for the same host).
+func TestParseComponentLogSensors_FloatFansPower(t *testing.T) {
+	text := `RESTful fan info:
+{ "fans": [
+  { "id": 0, "fan_name": "System Fan0 Front", "present": "OK", "status": "OK", "status_str": "OK", "speed_rpm": 2947, "speed_percent": 23, "max_speed_rpm": 20000, "fan_model": "8056" },
+  { "id": 1, "fan_name": "System Fan0 Rear", "present": "OK", "status": "OK", "status_str": "OK", "speed_rpm": 2520, "speed_percent": 23, "max_speed_rpm": 20000, "fan_model": "8056" }
+], "fans_power": 12.000000 }
+RESTful diskbackplane info:
+[]
+BMC`
+
+	sensors := ParseComponentLogSensors([]byte(text))
+	var fans, fanPower int
+	for _, s := range sensors {
+		switch s.Name {
+		case "System Fan0 Front", "System Fan0 Rear":
+			fans++
+		case "Fans_Power":
+			fanPower++
+			if s.Value != 12 {
+				t.Errorf("Fans_Power value = %v, want 12", s.Value)
+			}
+		}
+	}
+	if fans != 2 {
+		t.Fatalf("expected 2 fan sensors, got %d (float fans_power broke the parse)", fans)
+	}
+	if fanPower != 1 {
+		t.Errorf("expected 1 Fans_Power sensor, got %d", fanPower)
+	}
+}
+
 func TestParseHDDInfo_MergesIntoExistingStorage(t *testing.T) {
 	text := `RESTful HDD info:
 [

internal/parser/vendors/inspur/parser.go

@@ -16,7 +16,7 @@ import (
 
 // parserVersion - version of this parser module
 // IMPORTANT: Increment this version when making changes to parser logic!
-const parserVersion = "2.5"
+const parserVersion = "2.6"
 
 func init() {
 	parser.Register(&Parser{})
@@ -164,6 +164,15 @@ func (p *Parser) Parse(files []parser.ExtractedFile) (*models.AnalysisResult, er
 	if f := parser.FindFileByName(files, "component.log"); f != nil {
 		ParseComponentLog(f.Content, result.Hardware)
 
+		// Some combined component.log dumps have no devicefrusdr.log / asset.json;
+		// board manufacturer/product/part/UUID live only in "RESTful FRU info:".
+		if len(result.FRU) == 0 {
+			if fru := ParseComponentLogFRU(f.Content, result.Hardware); len(fru) > 0 {
+				result.FRU = fru
+				extractBoardInfo(result.FRU, result.Hardware)
+			}
+		}
+
 		// Extract events from component.log (memory errors, etc.)
 		componentEvents := ParseComponentLogEvents(f.Content)
 		result.Events = append(result.Events, componentEvents...)

internal/parser/vendors/inspur/sol_smartd.go

@@ -10,12 +10,24 @@ import (
 	"git.mchus.pro/mchus/logpile/internal/parser"
 )
 
-// solSmartdDeviceRe matches smartd device info lines from SOLHostCapture.log.
+// smartd prints one device-info line per drive during startup. Two shapes occur,
-// Example:
+// depending on how the drive is attached:
 //
-//	Device: /dev/sda [SAT], Micron_5400_MTFDDAK480TGA, S/N:2310400DC7E3, WWN:..., FW:D4CM003, 480 GB
+//	SAT  (SATA drive, ATA pass-through):
-var solSmartdDeviceRe = regexp.MustCompile(
+//	  Device: /dev/sda [SAT], Micron_5400_MTFDDAK480TGA, S/N:2310400DC7E3, WWN:5-00a075-1400dc7e3, FW:D4CM003, 480 GB
-	`Device: /dev/\S+ \[SAT\], (.+?), S/N:(\S+),.*?FW:(\S+), ([\d.]+) (GB|TB)`,
+//	SCSI (SAS drive, or SATA drive behind a SAS HBA in SCSI mode):
+//	  Device: /dev/sdb, [SEAGATE  ST6000NM005B     K0A1], lu id: 0x5000c500ee6e11f7, S/N: WX004FCC0000E22967PY, 6.00 TB
+//
+// The SCSI line has no firmware field and reports the model as a padded SCSI
+// INQUIRY triple "VENDOR  PRODUCT  REV".
+var (
+	solSmartdSATDeviceRe = regexp.MustCompile(
+		`Device: /dev/\S+ \[SAT\], (.+?), S/N:\s*(\S+),.*?FW:(\S+), ([\d.]+) (GB|TB)`,
+	)
+	solSmartdSCSIDeviceRe = regexp.MustCompile(
+		`Device: /dev/\S+?, \[(.+?)\],.*?S/N:\s*(\S+), ([\d.]+) (GB|TB)`,
+	)
+	multiSpaceRe = regexp.MustCompile(`\s{2,}`)
 )
 
 type solSmartdDevice struct {
@@ -23,6 +35,7 @@ type solSmartdDevice struct {
 	Serial    string
 	Firmware  string
 	SizeGB    int
+	Interface string // "SATA" or "SAS"
 }
 
 // parseSOLSmartdDevices extracts unique disk entries from SOLHostCapture.log content.
@@ -32,29 +45,66 @@ func parseSOLSmartdDevices(content []byte) []solSmartdDevice {
 	var out []solSmartdDevice
 
 	for _, line := range strings.Split(string(content), "\n") {
-		m := solSmartdDeviceRe.FindStringSubmatch(line)
+		dev, ok := parseSOLSmartdLine(line)
-		if m == nil {
+		if !ok {
 			continue
 		}
-		serial := strings.TrimSpace(m[2])
+		key := strings.ToLower(dev.Serial)
-		if serial == "" {
+		if _, dup := seen[key]; dup {
-			continue
-		}
-		key := strings.ToLower(serial)
-		if _, ok := seen[key]; ok {
 			continue
 		}
 		seen[key] = struct{}{}
+		out = append(out, dev)
+	}
+	return out
+}
 
-		sizeGB := parseSolSizeGB(m[4], m[5])
+func parseSOLSmartdLine(line string) (solSmartdDevice, bool) {
-		out = append(out, solSmartdDevice{
+	if m := solSmartdSATDeviceRe.FindStringSubmatch(line); m != nil {
+		serial := strings.TrimSpace(m[2])
+		if serial == "" {
+			return solSmartdDevice{}, false
+		}
+		return solSmartdDevice{
 			Model:     strings.TrimSpace(m[1]),
 			Serial:    serial,
 			Firmware:  strings.TrimSpace(m[3]),
-			SizeGB:   sizeGB,
+			SizeGB:    parseSolSizeGB(m[4], m[5]),
-		})
+			Interface: "SATA",
+		}, true
 	}
-	return out
+	if m := solSmartdSCSIDeviceRe.FindStringSubmatch(line); m != nil {
+		serial := strings.TrimSpace(m[2])
+		if serial == "" {
+			return solSmartdDevice{}, false
+		}
+		return solSmartdDevice{
+			Model:     scsiInquiryModel(m[1]),
+			Serial:    serial,
+			SizeGB:    parseSolSizeGB(m[3], m[4]),
+			Interface: "SAS",
+		}, true
+	}
+	return solSmartdDevice{}, false
+}
+
+// scsiInquiryModel turns a padded SCSI INQUIRY string ("SEAGATE  ST6000NM005B
+// K0A1") into "VENDOR PRODUCT", dropping the trailing revision. An "ATA" vendor
+// is a SATA drive bridged into SCSI mode — its product field already holds the
+// real model, so the vendor token is dropped.
+func scsiInquiryModel(raw string) string {
+	fields := multiSpaceRe.Split(strings.TrimSpace(raw), -1)
+	switch len(fields) {
+	case 0:
+		return strings.TrimSpace(raw)
+	case 1:
+		return fields[0]
+	}
+	vendor, product := fields[0], fields[1]
+	if strings.EqualFold(vendor, "ATA") {
+		return product
+	}
+	return vendor + " " + product
 }
 
 // parseSolSizeGB converts smartd size string ("480", "3.84") + unit ("GB", "TB") to integer GB.
@@ -215,7 +265,7 @@ func solEnrichByPlaceholder(hw *models.HardwareConfig, devices []solSmartdDevice
 			hw.Storage[idx].Manufacturer = extractStorageManufacturer(d.Model)
 		}
 		if hw.Storage[idx].Interface == "" {
-			hw.Storage[idx].Interface = "SATA"
+			hw.Storage[idx].Interface = solDeviceInterface(d)
 		}
 	}
 	return unmatched
@@ -229,11 +279,18 @@ func solMakeStorage(d solSmartdDevice) models.Storage {
 		SizeGB:       d.SizeGB,
 		Type:         solStorageType(d.Model),
 		Manufacturer: extractStorageManufacturer(d.Model),
-		Interface:    "SATA",
+		Interface:    solDeviceInterface(d),
 		Present:      true,
 	}
 }
 
+func solDeviceInterface(d solSmartdDevice) string {
+	if d.Interface != "" {
+		return d.Interface
+	}
+	return "SATA"
+}
+
 // solStorageType infers SSD vs HDD from the model string.
 // Micron SSD models start with "MTFDD"; Intel SSDs contain "SSD".
 func solStorageType(model string) string {

internal/parser/vendors/inspur/sol_smartd_test.go

@@ -36,6 +36,69 @@ func TestParseSOLSmartdDevices_Dedup(t *testing.T) {
 	}
 }
 
+// SAS drives (and SATA drives behind a SAS HBA in SCSI mode) print a different
+// smartd line shape: no [SAT] tag, a bracketed SCSI INQUIRY triple, "lu id",
+// spaced "S/N: ", and no firmware field.
+const solSmartdSCSISample = `
+[   21.481033] smartd[2015]: Device: /dev/sdb, [SEAGATE  ST6000NM005B     K0A1], lu id: 0x5000c500ee6e11f7, S/N: WX004FCC0000E22967PY, 6.00 TB
+[   21.481212] smartd[2015]: Device: /dev/sdd, [SEAGATE  ST6000NM005B     K0A1], lu id: 0x5000c500ee6f5ebf, S/N: WX004TKE0000E233A32A, 6.00 TB
+[   21.481235] smartd[2015]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
+`
+
+func TestParseSOLSmartdDevices_SCSI(t *testing.T) {
+	devices := parseSOLSmartdDevices([]byte(solSmartdSCSISample))
+	if len(devices) != 2 {
+		t.Fatalf("expected 2 SCSI devices, got %d: %v", len(devices), devices)
+	}
+	d := devices[0]
+	if d.Serial != "WX004FCC0000E22967PY" {
+		t.Errorf("serial: got %q", d.Serial)
+	}
+	if d.Model != "SEAGATE ST6000NM005B" {
+		t.Errorf("model: got %q, want %q", d.Model, "SEAGATE ST6000NM005B")
+	}
+	if d.SizeGB != 6000 {
+		t.Errorf("size: got %d, want 6000", d.SizeGB)
+	}
+	if d.Interface != "SAS" {
+		t.Errorf("interface: got %q, want SAS", d.Interface)
+	}
+	if d.Firmware != "" {
+		t.Errorf("firmware: got %q, want empty (not reported for SCSI)", d.Firmware)
+	}
+}
+
+func TestParseSOLSmartdDevices_MixedSATAandSCSI(t *testing.T) {
+	devices := parseSOLSmartdDevices([]byte(solSmartdSample + solSmartdSCSISample))
+	if len(devices) != 6 {
+		t.Fatalf("expected 4 SAT + 2 SCSI = 6 devices, got %d", len(devices))
+	}
+	got := map[string]string{}
+	for _, d := range devices {
+		got[d.Serial] = d.Interface
+	}
+	if got["2310400DC7E3"] != "SATA" {
+		t.Errorf("SAT device interface: got %q", got["2310400DC7E3"])
+	}
+	if got["WX004FCC0000E22967PY"] != "SAS" {
+		t.Errorf("SCSI device interface: got %q", got["WX004FCC0000E22967PY"])
+	}
+}
+
+func TestScsiInquiryModel(t *testing.T) {
+	cases := []struct{ raw, want string }{
+		{"SEAGATE  ST6000NM005B     K0A1", "SEAGATE ST6000NM005B"},
+		{"ATA      Micron_5400_MTFD  K0A1", "Micron_5400_MTFD"},
+		{"SEAGATE  ST6000NM005B", "SEAGATE ST6000NM005B"},
+		{"BareModel", "BareModel"},
+	}
+	for _, c := range cases {
+		if got := scsiInquiryModel(c.raw); got != c.want {
+			t.Errorf("scsiInquiryModel(%q) = %q, want %q", c.raw, got, c.want)
+		}
+	}
+}
+
 func TestParseSOLSmartdDevices_SkipsNonInfoLines(t *testing.T) {
 	content := `
 [   17.886177] smartd[3321]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.foo.ata.state